DOWNLOAD LG 22LV2500-UA (CHASSIS:LA01T) Service Manual ↓ Size: 4.03 MB | Pages: 50 in PDF or view online for FREE

- 13 -

• Adj. condition and cautionary items 
1) Lighting condition in surrounding area 

Surrounding lighting should be lower 10 lux. Try to isolate
adj. area into dark surrounding. 

2) Probe location : Color Analyzer (CA-210) probe should be

within 10cm and perpendicular of the module surface (80°~
100°) 

3) Aging time 
- After Aging Start, Keep the Power ON status during 5

Minutes. 

- In case of LCD, Back-light on should be checked using no

signal or Full-white pattern. 

5.1.6 Reference (White Balance Adj. coordinate and color

temperature) 

(1) Luminance: 204 Gray, 80IRE 
(2) Standard color coordinate and temperature using CS-1000

(over 26 inch) 

• Standard color coordinate and temperature using CA-

210(CH 9) 

America due to rating 

• Applied model: LA01U Chassis applied None USA

model(CANADA, MEXICO) 

5.3.2 Method  
(1) Press ADJ key on the Adj. R/C, and then select Country

Group Menu 

(2) Depending on destination, select KR or US, then on the

lower Country option, select US, CA, MX.  Selection is
done using +, - KEY 

• Method: Press Adj. key on the Adj. R/C, then select Tool

option.  

• After final inspection, press In-Stop key of the Adj. R/C and

check that the unit goes to Stand-by mode. 

Mode

Color Coordination

Temp

∆

UV

x

y

COOL

0.269

0.273

13000K

0.0000

MEDIUM

0.285

0.293

9300K

0.0000

WARM

0.313

0.329

6500K

0.0000

Mode

Color Coordination

Temp

∆

UV

x

y

COOL

0.269±0.002

0.273±0.002

13000K

0.0000

MEDIUM

0.285±0.002

0.293±0.002

9300K

0.0000

WARM

0.313+0.002

0.329±0.002

6500K

0.0000

Model

Tool1

Tool2

Tool3

Tool4

Tool5

Menu

26LK330-UB 13896

18966

51209

2328

290

AUO

- 14 -

6.1.1. GND & HI-POT auto-check preparation  

(1) Check the POWER CABLE and SIGNAL CABE

insertion condition 

6.1.2. GND & HI-POT auto-check  

(1) Pallet moves in the station. (POWER CORD / AV
CORD is tightly inserted) 
(2) Connect the AV JACK Tester. 
(3) Controller (GWS103-4) on. 
(4) GND Test (Auto)  

- If Test is failed, Buzzer operates. 
- If Test is passed, execute next process (Hi-pot test).

(Remove A/V CORD from A/V JACK BOX)  

(5) HI-POT test (Auto) 

- If Test is failed, Buzzer operates. 
- If Test is passed, GOOD Lamp on and move to next

process automatically. 

• TEST voltage

- GND: 1.5KV/min at 100mA
- SIGNAL: 3KV/min at 100mA

• TEST time: 1 second
• TEST POINT

- GND TEST = POWER CORD GND & SIGNAL CABLE

METAL GND

NEUTRAL

• LEAKAGE CURRENT: At 0.5mArms

Step 1) Turn on the TV. 
Step 2) Press EYE button in adjust remote control. 
Step 3) Stay 6 seconds with Eye Q sensor hidden located on

the front of the set. 

Step 4) Check the “Sensor Data” on the screen and check

whether the value is lower thanafter 6 seconds, the
value does not go below 10, Eye Q sensor is not
working properly. Then, change the sensor. 

Step 5) Remove hand from the Eye Q II sensor and stay for 6

seconds. 

Step 6) Check whether the “Back Light (xxx)” value has risen

on the screen. If after 6 seconds and the value still
does not go high, the eye Q II sensor is not working
properly. Replace the sensor. 

 

<Step1>

<Step2>

<Step3>

<Step4>

<Step5>

- 15 -

1.  Put the USB Stick to the USB socket  
2.  Automatically detecting update file in USB Stick 
- If your downloaded program version in USB Stick is Low, it

didn’t work.  But your downloaded version is High, USB data
is automatically detecting 

3.  Show the message “Copying files from memory” 

4.  Updating is starting. 

5.  Updating Completed, The TV will restart automatically 
6.  If your TV is turned on, check your updated version and

Tool option. (Explain the Tool option, next stage) 

* If downloading version is more high than your TV have, TV
can lost all channel data. In this case, you have to channel
recover. if all channel data is cleared, you didn’t have a
DTV/ATV test on production line. 

* After downloading, have to adjust TOOL OPTION again. 
1. Push "IN-START" key in service remote controller. 
2. Select "Tool Option 1" and Push “OK” button. 
3. Punch in the number. (Each model has their number.) 

- 16 -

900

300

310

51

1

120

400

540

521

810

820

200

A5

910

510

A2

410

A31

A10

A21

LV

1

Many electrical and mechanical parts in this chassis have special safety-related characteristics. These
parts are identified by       in the Schematic Diagram and EXPLODED VIEW. 
It is essential that these special safety parts should be replaced with the same components as
recommended in this manual to prevent X-RADIATION, Shock, Fire, or other Hazards. 
Do not modify the original design without permission of manufacturer.