DOWNLOAD LG GR-S392QVC Service Manual ↓ Size: 2.05 MB | Pages: 59 in PDF or view online for FREE

- 5 -

NOTE : This is a basic model. The shape of refrigerator is subject to change.

Twisting Ice Serve(Option)

(Option)

F.I.R Lamp (Option)

(Plastic or Steel

 or Tempered Glass)

Distributes cold air to

 each part of refrigerator

 compartment.

Used to keep fruits

and vegetables, etc.

fresh and crisp.

Vegetable Partitioner
(Option)

(Option
if steel shelf)
You can use
this as
Vodka rack
in the Freezer.

The secondary part of the TRANS is composed of the power supply for the display and relay drive (12Vdc) and that for the
MICOM and IC (5Vdc).

The voltage for each part is as follows.

VA1 is a part for preventing the over voltage and noise. When 385V or higher power is applied, the inside elements are
short-circuited and broken, resulting in the blowout of the fuse in order to protect the elements of the secondary part of the
TRANS.

- 19 -

PART

VA 1

CE 2

CE3

VOLTAGE

220 Vac

12 Vdc

5 Vdc

This circuit is to generate the base clock for calculating time and the synchro clock for transmitting data from and to the
inside logic elements of the IC1(MICOM).  Be sure to use the authentic parts since the calculating time by the IC1 may be
changed or it will not work if the OSC1 SPEC is changed.

The RESET circuit is for allowing all the functions to start at the initial conditions by initializing various parts including the
RAM inside the MICOM (IC1) when the power is initially supplied or the power supply to the MICOM is restored after a
momentary power failure.  For the initial 10ms of power supply, ‘LOW’ voltage is applied to the MICOM RESET terminal.
During a normal operation, 5V is applied to the RESET terminal. (If a trouble occurs in the RESET IC, the MICOM will not
work.)

- 20 -

- 21 -

Load Type

Defrosting Heater

Refrigerator Fan

Measurement Location(IC5)

No.13

No.10

No.12

ON

1V or below

Condition

OFF

12V

Comp,

Freezer Fan Motor