JBL SCS 110 SYSTEM User Manual / Operation Manual ▷ View online
Troubleshooting
three.
Testing
Finally. Take a “test drive” with some favorite music or movies.
1.
With the receiver/amplifier
still turned off, confirm that
its volume control is turned
all the way down. Next,
center the balance control. If
the receiver/amplifier has an
A/B speaker switch, set it to
correspond to the speaker
terminals connected to the
SCS110 system.
its volume control is turned
all the way down. Next,
center the balance control. If
the receiver/amplifier has an
A/B speaker switch, set it to
correspond to the speaker
terminals connected to the
SCS110 system.
2.
Now, turn on your receiver/
amplifier and select a music
source such as a CD player,
cassette deck or FM tuner.
source such as a CD player,
cassette deck or FM tuner.
3.
Turn up the volume control
slowly until you hear sound
from the speakers.
from the speakers.
4.
Rotate the balance control
all the way to the left. Sound
should come only from the
left speaker. If the sound
comes from the right speaker
with the balance control to
the left, the speaker wires
have been reversed during
hook-up. Turn the receiver/
amplifier “off” and switch
both sets of speaker wires.
Dolby Pro Logic*-equipped
devices (AV Receivers,
Surround Sound processors
or decoders, TVs or other
sources) include a “test tone”
you can use to balance the
should come only from the
left speaker. If the sound
comes from the right speaker
with the balance control to
the left, the speaker wires
have been reversed during
hook-up. Turn the receiver/
amplifier “off” and switch
both sets of speaker wires.
Dolby Pro Logic*-equipped
devices (AV Receivers,
Surround Sound processors
or decoders, TVs or other
sources) include a “test tone”
you can use to balance the
volume of all the speakers in
a surround sound system.
Refer to the instructions
accompanying your compo-
nent for selecting the test
tone mode and using it to
balance speaker levels in your
home theater.
a surround sound system.
Refer to the instructions
accompanying your compo-
nent for selecting the test
tone mode and using it to
balance speaker levels in your
home theater.
If there is no sound from
any of the speakers, check
the following:
• Receiver/amplifier is on and
a source is playing.
• Review proper operation of
your receiver/amplifier.
any of the speakers, check
the following:
• Receiver/amplifier is on and
a source is playing.
• Review proper operation of
your receiver/amplifier.
If there is no sound coming
from one speaker, check the
following:
• Check the “Balance” control
on your receiver/amplifier.
• Check all wires and con-
nections between receiver/
amplifier and speakers.
• Make sure all wires are con-
nected. Make sure none of the
speaker wires are frayed, cut,
or punctured.
from one speaker, check the
following:
• Check the “Balance” control
on your receiver/amplifier.
• Check all wires and con-
nections between receiver/
amplifier and speakers.
• Make sure all wires are con-
nected. Make sure none of the
speaker wires are frayed, cut,
or punctured.
If the system plays at low
volumes but shuts off as
volume is increased, check
the following:
• Check all wires and con-
nections between receiver/
amplifier and speakers.
• Make sure all wires are con-
nected. Make sure none of the
speaker wires are frayed, cut,
or punctured.
• If more than one pair of
main speakers is being used,
check the minimum impedance
requirements of your receiver/
amplifier.
volumes but shuts off as
volume is increased, check
the following:
• Check all wires and con-
nections between receiver/
amplifier and speakers.
• Make sure all wires are con-
nected. Make sure none of the
speaker wires are frayed, cut,
or punctured.
• If more than one pair of
main speakers is being used,
check the minimum impedance
requirements of your receiver/
amplifier.
If there is low bass output,
check the following:
• Make sure the polarity
(+ and –) of the left and
right “Speaker Inputs” are
connected properly.
check the following:
• Make sure the polarity
(+ and –) of the left and
right “Speaker Inputs” are
connected properly.
If there is no sound from
the surround speakers, check
the following:
• Check all wires and con-
nections between receiver/
amplifier and speakers.
• Make sure all wires are con-
nected. Make sure none of the
speaker wires are frayed, cut,
or punctured.
• Review proper operation of
your receiver/amplifier and its
surround sound features.
the surround speakers, check
the following:
• Check all wires and con-
nections between receiver/
amplifier and speakers.
• Make sure all wires are con-
nected. Make sure none of the
speaker wires are frayed, cut,
or punctured.
• Review proper operation of
your receiver/amplifier and its
surround sound features.
SCS110 (Simply Cinema) OM 11/20/00 4:25 PM Page 5
C
E
L E
B R A T I N
G
5
0
Y E A
R
S
©
1996 JBL, Incorporated. JBL and Simply Cinema are registered trademarks of JBL, Incorporated.
*Trademark of Dolby Laboratories.
Printed in USA 8/96
Printed in USA 8/96
Part No. SCS110OM
Specifications
SCS110 System
Power Handling
10 – 120 watts
10 – 120 watts
Frequency Response
40Hz – 20kHz (±3dB)
40Hz – 20kHz (±3dB)
Accessories such as the
optional stands and brackets
are available through your JBL
dealer. For a dealer in the USA
call 1-800-336-4JBL.
optional stands and brackets
are available through your JBL
dealer. For a dealer in the USA
call 1-800-336-4JBL.
Refinements may be made on
occasion to existing products
without notice, but will always
meet or exceed original speci-
fications unless otherwise
stated.
occasion to existing products
without notice, but will always
meet or exceed original speci-
fications unless otherwise
stated.
Notice to Purchaser: JBL
assumes no responsibility or
liability for injuries or property
damage – direct, indirect, or
consequential – resulting from
the improper installation of
these loudspeakers.
assumes no responsibility or
liability for injuries or property
damage – direct, indirect, or
consequential – resulting from
the improper installation of
these loudspeakers.
sat10
Power Handling
10 – 80 watts
10 – 80 watts
Frequency Response
150Hz – 20kHz (±3dB)
150Hz – 20kHz (±3dB)
Impedance
8 ohms nominal
8 ohms nominal
Sensitivity
88dB @ 1 watt/1 meter
88dB @ 1 watt/1 meter
Crossover Frequency
3.5kHz (midrange to tweeter)
3.5kHz (midrange to tweeter)
Tweeter
One 3/4" titanium composite
dome, video-shielded
One 3/4" titanium composite
dome, video-shielded
Midrange
One 3-1/2" neodymium
driver, video-shielded
One 3-1/2" neodymium
driver, video-shielded
Dimensions (HxWxD)
6-1/2 x 3-3/4 x 4-1/4 inches
165 x 95 x 108mm
6-1/2 x 3-3/4 x 4-1/4 inches
165 x 95 x 108mm
Weight
1.5 lbs/.7 kg
1.5 lbs/.7 kg
bass10
Power Handling
10 – 120 watts
10 – 120 watts
Frequency Response
40Hz – 150Hz (±3dB)
40Hz – 150Hz (±3dB)
Impedance
8 ohms nominal
8 ohms nominal
Sensitivity
88dB @ 1 watt/1 meter
88dB @ 1 watt/1 meter
Crossover Frequency
150Hz (subwoofer to satellite)
150Hz (subwoofer to satellite)
Bass
Two 5-1/4" woofers
Triple chamber band-pass
subwoofer
Two 5-1/4" woofers
Triple chamber band-pass
subwoofer
Dimensions (HxWxD)
14-3/4 x 8-1/2 x 19 inches
375 x 216 x 465mm
14-3/4 x 8-1/2 x 19 inches
375 x 216 x 465mm
Weight
28 lbs/12.7 kg
28 lbs/12.7 kg
sat10 Surround
Speakers
Speakers
Recommended Power
10 – 70 watts
10 – 70 watts
Impedance
8 ohms nominal
8 ohms nominal
Sensitivity
90dB @ 1 watt/1 meter
90dB @ 1 watt/1 meter
Frequency Response
100Hz – 15kHz (±3dB)
100Hz – 15kHz (±3dB)
Dimensions (HxWxD)
6-1/2 x 3-3/4 x 4-1/4 inches
165 x 95 x 108mm
6-1/2 x 3-3/4 x 4-1/4 inches
165 x 95 x 108mm
Weight
1.5 lbs/.7 kg
1.5 lbs/.7 kg
Declaration of Conformity
Kongevejen 194B
DK-3460 Birkerød
DENMARK
DK-3460 Birkerød
DENMARK
declare in own responsibility, that the products described
in this owner’s manual are in compliance with technical
standards:
EN 50 081-1/1992
EN 50 082-1/3.1995
Steen Michaelsen
Birkerød. DENMARK. 7/96
A Harman International Company
SCS110 (Simply Cinema) OM 11/20/00 4:25 PM Page 6
C
E
L E
B R A T I N
G
5
0
Y E A
R
S
©
1996 JBL, Incorporated. JBL and Simply Cinema are registered trademarks of JBL, Incorporated.
*Trademark of Dolby Laboratories.
Printed in USA 8/96
Printed in USA 8/96
Part No. SCS110OM
Specifications
SCS110 System
Power Handling
10 – 120 watts
10 – 120 watts
Frequency Response
40Hz – 20kHz (±3dB)
40Hz – 20kHz (±3dB)
Accessories such as the
optional stands and brackets
are available through your JBL
dealer. For a dealer in the USA
call 1-800-336-4JBL.
optional stands and brackets
are available through your JBL
dealer. For a dealer in the USA
call 1-800-336-4JBL.
Refinements may be made on
occasion to existing products
without notice, but will always
meet or exceed original speci-
fications unless otherwise
stated.
occasion to existing products
without notice, but will always
meet or exceed original speci-
fications unless otherwise
stated.
Notice to Purchaser: JBL
assumes no responsibility or
liability for injuries or property
damage – direct, indirect, or
consequential – resulting from
the improper installation of
these loudspeakers.
assumes no responsibility or
liability for injuries or property
damage – direct, indirect, or
consequential – resulting from
the improper installation of
these loudspeakers.
sat10
Power Handling
10 – 80 watts
10 – 80 watts
Frequency Response
150Hz – 20kHz (±3dB)
150Hz – 20kHz (±3dB)
Impedance
8 ohms nominal
8 ohms nominal
Sensitivity
88dB @ 1 watt/1 meter
88dB @ 1 watt/1 meter
Crossover Frequency
3.5kHz (midrange to tweeter)
3.5kHz (midrange to tweeter)
Tweeter
One 3/4" titanium composite
dome, video-shielded
One 3/4" titanium composite
dome, video-shielded
Midrange
One 3-1/2" neodymium
driver, video-shielded
One 3-1/2" neodymium
driver, video-shielded
Dimensions (HxWxD)
6-1/2 x 3-3/4 x 4-1/4 inches
165 x 95 x 108mm
6-1/2 x 3-3/4 x 4-1/4 inches
165 x 95 x 108mm
Weight
1.5 lbs/.7 kg
1.5 lbs/.7 kg
bass10
Power Handling
10 – 120 watts
10 – 120 watts
Frequency Response
40Hz – 150Hz (±3dB)
40Hz – 150Hz (±3dB)
Impedance
8 ohms nominal
8 ohms nominal
Sensitivity
88dB @ 1 watt/1 meter
88dB @ 1 watt/1 meter
Crossover Frequency
150Hz (subwoofer to satellite)
150Hz (subwoofer to satellite)
Bass
Two 5-1/4" woofers
Triple chamber band-pass
subwoofer
Two 5-1/4" woofers
Triple chamber band-pass
subwoofer
Dimensions (HxWxD)
14-3/4 x 8-1/2 x 19 inches
375 x 216 x 465mm
14-3/4 x 8-1/2 x 19 inches
375 x 216 x 465mm
Weight
28 lbs/12.7 kg
28 lbs/12.7 kg
sat10 Surround
Speakers
Speakers
Recommended Power
10 – 70 watts
10 – 70 watts
Impedance
8 ohms nominal
8 ohms nominal
Sensitivity
90dB @ 1 watt/1 meter
90dB @ 1 watt/1 meter
Frequency Response
100Hz – 15kHz (±3dB)
100Hz – 15kHz (±3dB)
Dimensions (HxWxD)
6-1/2 x 3-3/4 x 4-1/4 inches
165 x 95 x 108mm
6-1/2 x 3-3/4 x 4-1/4 inches
165 x 95 x 108mm
Weight
1.5 lbs/.7 kg
1.5 lbs/.7 kg
Declaration of Conformity
Kongevejen 194B
DK-3460 Birkerød
DENMARK
DK-3460 Birkerød
DENMARK
declare in own responsibility, that the products described
in this owner’s manual are in compliance with technical
standards:
EN 50 081-1/1992
EN 50 082-1/3.1995
Steen Michaelsen
Birkerød. DENMARK. 7/96
A Harman International Company
SCS110 (Simply Cinema) OM 11/20/00 4:25 PM Page 6
C
E
L E
B R A T I N
G
5
0
Y E A
R
S
©
1996 JBL, Incorporated. JBL and Simply Cinema are registered trademarks of JBL, Incorporated.
*Trademark of Dolby Laboratories.
Printed in USA 8/96
Printed in USA 8/96
Part No. SCS110OM
Specifications
SCS110 System
Power Handling
10 – 120 watts
10 – 120 watts
Frequency Response
40Hz – 20kHz (±3dB)
40Hz – 20kHz (±3dB)
Accessories such as the
optional stands and brackets
are available through your JBL
dealer. For a dealer in the USA
call 1-800-336-4JBL.
optional stands and brackets
are available through your JBL
dealer. For a dealer in the USA
call 1-800-336-4JBL.
Refinements may be made on
occasion to existing products
without notice, but will always
meet or exceed original speci-
fications unless otherwise
stated.
occasion to existing products
without notice, but will always
meet or exceed original speci-
fications unless otherwise
stated.
Notice to Purchaser: JBL
assumes no responsibility or
liability for injuries or property
damage – direct, indirect, or
consequential – resulting from
the improper installation of
these loudspeakers.
assumes no responsibility or
liability for injuries or property
damage – direct, indirect, or
consequential – resulting from
the improper installation of
these loudspeakers.
sat10
Power Handling
10 – 80 watts
10 – 80 watts
Frequency Response
150Hz – 20kHz (±3dB)
150Hz – 20kHz (±3dB)
Impedance
8 ohms nominal
8 ohms nominal
Sensitivity
88dB @ 1 watt/1 meter
88dB @ 1 watt/1 meter
Crossover Frequency
3.5kHz (midrange to tweeter)
3.5kHz (midrange to tweeter)
Tweeter
One 3/4" titanium composite
dome, video-shielded
One 3/4" titanium composite
dome, video-shielded
Midrange
One 3-1/2" neodymium
driver, video-shielded
One 3-1/2" neodymium
driver, video-shielded
Dimensions (HxWxD)
6-1/2 x 3-3/4 x 4-1/4 inches
165 x 95 x 108mm
6-1/2 x 3-3/4 x 4-1/4 inches
165 x 95 x 108mm
Weight
1.5 lbs/.7 kg
1.5 lbs/.7 kg
bass10
Power Handling
10 – 120 watts
10 – 120 watts
Frequency Response
40Hz – 150Hz (±3dB)
40Hz – 150Hz (±3dB)
Impedance
8 ohms nominal
8 ohms nominal
Sensitivity
88dB @ 1 watt/1 meter
88dB @ 1 watt/1 meter
Crossover Frequency
150Hz (subwoofer to satellite)
150Hz (subwoofer to satellite)
Bass
Two 5-1/4" woofers
Triple chamber band-pass
subwoofer
Two 5-1/4" woofers
Triple chamber band-pass
subwoofer
Dimensions (HxWxD)
14-3/4 x 8-1/2 x 19 inches
375 x 216 x 465mm
14-3/4 x 8-1/2 x 19 inches
375 x 216 x 465mm
Weight
28 lbs/12.7 kg
28 lbs/12.7 kg
sat10 Surround
Speakers
Speakers
Recommended Power
10 – 70 watts
10 – 70 watts
Impedance
8 ohms nominal
8 ohms nominal
Sensitivity
90dB @ 1 watt/1 meter
90dB @ 1 watt/1 meter
Frequency Response
100Hz – 15kHz (±3dB)
100Hz – 15kHz (±3dB)
Dimensions (HxWxD)
6-1/2 x 3-3/4 x 4-1/4 inches
165 x 95 x 108mm
6-1/2 x 3-3/4 x 4-1/4 inches
165 x 95 x 108mm
Weight
1.5 lbs/.7 kg
1.5 lbs/.7 kg
Declaration of Conformity
Kongevejen 194B
DK-3460 Birkerød
DENMARK
DK-3460 Birkerød
DENMARK
declare in own responsibility, that the products described
in this owner’s manual are in compliance with technical
standards:
EN 50 081-1/1992
EN 50 082-1/3.1995
Steen Michaelsen
Birkerød. DENMARK. 7/96
A Harman International Company
SCS110 (Simply Cinema) OM 11/20/00 4:25 PM Page 6
Display