JBL ON BEAT RUMBLE (serv.man6) Service Manual ▷ View online
3
www.jbl.com
Bass Boost button and LED: Press this button to enhance the bass performance. The
button’s LED will glow when Bass Boost is on.
Club EQ button and LED: Press this button to toggle between two EQ mode settings:
“Basic” and “Club.” The Basic setting offers a stereo perspective, while the Club setting
produces a high-energy, more focused sound. When the EQ is set to Club, the EQ LED will
glow white.
When you are using the JBL MusicFlow app, the following additional EQ settings are
When you are using the JBL MusicFlow app, the following additional EQ settings are
available: Wider Stereo Movie, Rock Music, Jazz Music and Gaming.
Source button and LED: Press this button to cycle through the audio sources: Bluetooth,
docked device and Auxiliary Input. The Source button LED will glow to indicate the active
source: white for a docked device, blue for a paired Bluetooth device and amber for a
device connected to the Auxiliary input.
• If you begin to stream audio from a paired Bluetooth device or play audio from a device
connected to the dock while another source is playing, the dock will automatically switch
to the new source.
Power button and LED: When the dock is on, press the Power button to put it into the
standby mode. The button’s LED will glow solid amber when the unit is in standby. When
the dock is in standby, press the Power button to turn it on. The button’s LED will glow
solid white when the unit is on.
When the dock is in the standby mode, it will automatically turn on when it detects audio
playing from a Bluetooth-connected device or from a docked device.
When the dock is on, it will automatically enter the standby mode after 10 minutes of
inactivity (no audio input and no user-control operation). The button’s LED will glow amber
when the dock is in standby.
Note: When the dock enters the standby mode, it will also bring a docked device into
standby mode.
Volume Up/Down buttons: Press these buttons to raise and lower the dock’s
volume. To mute the sound, press both buttons at the same time. (The Power button LED
will flash white when the sound is muted.) To restore the sound, press either Volume button
or both buttons together.
Dock Lid: Gently press down on the front edge of the dock lid to release it and reveal the
multi-pin Lightning docking connector. To close the dock, gently push the lid back in the
enclosure until it clicks.
English
4
Docking connector: Place your device onto the Lightning connector located at the back
of the docking well so that it is firmly seated on the connector.
Made for
iPad 4th generation
iPad mini
iPhone 5
iPod touch 5th generation
iPod nano 7th generation
Dock Lid
Lightning
Lightning
Connector
Note: We recommend that you disable the”Shake to Shuffle” feature on your iPod nano,
iPod touch and iPhone before docking the device on the JBL OnBeat Rumble speaker
dock.
BLUETOOTH WIReLeSS StReamInG
To stream audio wirelessly to the dock from a Bluetooth-enabled device:
1. If the dock’s Source LED is not flashing blue, press the Source button until the LED
begins flashing blue to indicate that the unit is in the Bluetooth pairing mode.
2. Place the Bluetooth-enabled device in the pairing mode. Use the device’s Bluetooth
pairing menu to pair with the dock. (If the device requires a pairing code, use
0000.)
3. When the dock’s Source LED glows blue continually, it is paired with the device, and
you can stream audio via Bluetooth from the device to the dock.
To disconnect the Bluetooth device, press and hold the Source button. To pair the dock with
a different Bluetooth-enabled device, repeat Steps 2 and 3 with the new device.
5
www.jbl.com
aPPS FOR YOuR JBL OnBeat RumBLe SPeakeR DOck
In addition to the music-playback applications that come with your mobile device or tablet,
the JBL MusicFlow
™
app can also be used with your JBL OnBeat Rumble speaker dock.
The JBL MusicFlow app is a free music player that enables you to create playlists on
the fly. Similar to a jukebox, the MusicFlow app lets you queue and play songs without
interruption, so you can enjoy a continuous flow of music while adding more songs or
removing old ones. An album-cover interface gives you access to all your music with a
sweep of your finger. Find it at the Apple App Store.
uPGRaDInG FIRmWaRe
You can upgrade the JBL OnBeat Rumble speaker dock’s firmware from within the
JBL MusicFlow app that is installed on a docked device. Follow the upgrade instructions
in the app.
SPecIFIcatIOnS
Low-frequency transducer:
1 x 4-1/2" (114mm) down-firing cone
High-frequency transducers:
2 x 2-1/2" (64mm) cones
Amplifier power (1% THD+N):
11W x 2 (full-range) + 28W (subwoofer)
Frequency response:
50Hz – 20kHz (–6dB)
Signal-to-noise ratio:
>75dB
Bluetooth transmitter frequency range:
2.402GHz – 2.480GHz
Bluetooth transmitter power:
0dBm ~ 20dBm (EIRP)
Bluetooth transmitter modulation:
GFSK/π/4-DQPSK/8-DPSK
Power consumption:
60W (max); <1.0W (standby, all regions except
USA and EU); <0.5W (standby, USA, EU)
Power supply:
18V DC, 3.3A
Dimensions (W x H x D):
453mm x 169mm x 223mm
(17-13/16" x 6-11/16" x 8-13/16")
English
6
JBL is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other
countries.
JBL OnBeat Rumble is a trademark of HARMAN International Industries, Incorporated.
The Bluetooth
®
word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such
marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those
of their respective owners.
Apple, iPad, iPhone, iPod, iPod nano and iPod touch are trademarks of Apple Inc., registered in the U.S. and other
countries. Lightning is a trademark of Apple Inc. iPad, iPod and iPhone not included. “Made for iPod,” “Made for
iPhone” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPad, iPod
or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not
responsible for the operation of this device or its compliance with safety and regulatory standards.
Please note that the use of this accessory with iPad, iPod or iPhone may affect wireless performance.
Features, specifications and appearance are subject to change without notice.
Part No. JBLP3890 Rev. A
HARMAN International Industries, Incorporated
Click on the first or last page to see other ON BEAT RUMBLE (serv.man6) service manuals if exist.