JBL ON BEAT AIR (serv.man4) EMC - CB Certificate ▷ View online
www.tuv.com
Page 4 of 6
Report No.: 11023927 002
TRF No. IEC60950_1B
Copy of marking plate
Remark: All models rating label are in the same design except for type designation. Above labels for
representing the other models.
representing the other models.
www.tuv.com
Page 5 of 6
Report No.: 11023927 002
TRF No. IEC60950_1B
Test item particulars...................................................:
Equipment mobility.....................................................: [x] movable [] hand-held [] transportable
[] stationary [] for building-in [] direct plug-in
Connection to the mains ............................................: [x] pluggable equipment [x] type A [] type B
[] permanent connection
[x] detachable power supply cord
[] non-detachable power supply cord
[] not directly connected to the mains
[x] detachable power supply cord
[] non-detachable power supply cord
[] not directly connected to the mains
Operating condition ....................................................: [x] continuous
[] rated operating / resting time:
Access location .........................................................: [x] operator accessible
[] restricted access location
Over voltage category (OVC) ....................................: [] OVC I [x] OVC II [] OVC III [] OVC IV
[] other:
Mains supply tolerance (%) or absolute mains supply
values ........................................................................:
values ........................................................................:
±
10% (requested by client)
Tested for IT power systems ....................................: [x] Yes (only for Norway) [] No
IT testing, phase-phase voltage (V) ..........................: 230V
Class of equipment ...................................................: [x Class I [] Class II [] Class III
[] Not classified
Considered current rating of protective device as part
of the building installlation (A) ...................................:
of the building installlation (A) ...................................:
16A
Pollution degree (PD) ................................................: [] PD 1 [x] PD 2 [] PD 3
IP protection class .....................................................: IPX0
Altitude during operation (m) .....................................: Up to 2000
Altitude of test laboratory (m) ....................................: below 2000
Mass of equipment (kg) ............................................: 0.168
Possible test case verdicts:
- test case does not apply to the test object ................. : N/A
- test object does meet the requirement....................... : P (Pass)
- test object does not meet the requirement................. : F (Fail)
Testing.......................................................................... :
Date of receipt of test item ............................................ : Mar. 30, 2011
Date(s) of performance of tests.................................... : N/A
General remarks:
The test results presented in this report relate only to the object tested.
This report shall not be reproduced, except in full, without the written approval of the Issuing testing
laboratory.
"(see Enclosure #)" refers to additional information appended to the report.
"(see appended table)" refers to a table appended to the report.
Throughout this report a
This report shall not be reproduced, except in full, without the written approval of the Issuing testing
laboratory.
"(see Enclosure #)" refers to additional information appended to the report.
"(see appended table)" refers to a table appended to the report.
Throughout this report a
comma /
point is used as the decimal separator.
www.tuv.com
Page 6 of 6
Report No.: 11023927 002
TRF No. IEC60950_1B
Manufacturer’s Declaration per sub-clause 6.2.5 of IECEE 02:
The application for obtaining a CB Test Certificate
includes more than one factory location and a
declaration from the Manufacturer stating that the
sample(s) submitted for evaluation is (are)
representative of the products from each factory has
been provided ................................................................:
includes more than one factory location and a
declaration from the Manufacturer stating that the
sample(s) submitted for evaluation is (are)
representative of the products from each factory has
been provided ................................................................:
Yes
Not applicable
When differences exist; they shall be identified in the General product information section.
Name and address of factory (ies) .......................... : Dongguan Sunstrong Electric Machine
Company Ltd.
Sunstrong Industrial Park, Sicun Administration
Zone, Tangxia Town, Dongguan, Guangdong, P.R.
China.
China.
General product information:
Definition of variable:
Variable:
Range of variable:
Content:
x
12, 20 or 30
Indicate output voltage’s range, 12 represent for output
voltage from 12.0V – 18.0V; 20 represent for output
voltage from 18.1V – 30.0V; 30 represent for output
voltage from 30.1V – 48.0V;
voltage from 12.0V – 18.0V; 20 represent for output
voltage from 18.1V – 30.0V; 30 represent for output
voltage from 30.1V – 48.0V;
a
120 - 480
3 digits, indicate 10 times output voltage in Volt., the
minimum step is 0.1V. eg: 120=12.0V, 480=48.0V.
minimum step is 0.1V. eg: 120=12.0V, 480=48.0V.
b
010 - 360
3 digits, indicate 100 times output current in A, the
minimum step is 0.01A. eg: 010=0.1A, 360=3.6A.
minimum step is 0.01A. eg: 010=0.1A, 360=3.6A.
Notes: All models have the same circuit diagram, PCB layout except for transformer, output rating and
some component ratings (see below table for detail).
some component ratings (see below table for detail).
Description of change(s):
1. Added additional trademark
for model SSA-60W-x ab (for variables, see page 6 for details)
.
Change
Testing
Comments
1
N/A
No affect to safety, see only copy of marking plate on page 4
for details.
for details.
Other comments:
History of amendments and modifications:
Ref. No. 11023927 001, dated Jan. 20, 2010 (original test report)
Ref. No. 11023927 002, dated May. 3, 2011 (1
Ref. No. 11023927 002, dated May. 3, 2011 (1
st
Amendment)
www.tuv.com
Page 6 of 6
Report No.: 11023927 002
TRF No. IEC60950_1B
Manufacturer’s Declaration per sub-clause 6.2.5 of IECEE 02:
The application for obtaining a CB Test Certificate
includes more than one factory location and a
declaration from the Manufacturer stating that the
sample(s) submitted for evaluation is (are)
representative of the products from each factory has
been provided ................................................................:
includes more than one factory location and a
declaration from the Manufacturer stating that the
sample(s) submitted for evaluation is (are)
representative of the products from each factory has
been provided ................................................................:
Yes
Not applicable
When differences exist; they shall be identified in the General product information section.
Name and address of factory (ies) .......................... : Dongguan Sunstrong Electric Machine
Company Ltd.
Sunstrong Industrial Park, Sicun Administration
Zone, Tangxia Town, Dongguan, Guangdong, P.R.
China.
China.
General product information:
Definition of variable:
Variable:
Range of variable:
Content:
x
12, 20 or 30
Indicate output voltage’s range, 12 represent for output
voltage from 12.0V – 18.0V; 20 represent for output
voltage from 18.1V – 30.0V; 30 represent for output
voltage from 30.1V – 48.0V;
voltage from 12.0V – 18.0V; 20 represent for output
voltage from 18.1V – 30.0V; 30 represent for output
voltage from 30.1V – 48.0V;
a
120 - 480
3 digits, indicate 10 times output voltage in Volt., the
minimum step is 0.1V. eg: 120=12.0V, 480=48.0V.
minimum step is 0.1V. eg: 120=12.0V, 480=48.0V.
b
010 - 360
3 digits, indicate 100 times output current in A, the
minimum step is 0.01A. eg: 010=0.1A, 360=3.6A.
minimum step is 0.01A. eg: 010=0.1A, 360=3.6A.
Notes: All models have the same circuit diagram, PCB layout except for transformer, output rating and
some component ratings (see below table for detail).
some component ratings (see below table for detail).
Description of change(s):
1. Added additional trademark
for model SSA-60W-x ab (for variables, see page 6 for details)
.
Change
Testing
Comments
1
N/A
No affect to safety, see only copy of marking plate on page 4
for details.
for details.
Other comments:
History of amendments and modifications:
Ref. No. 11023927 001, dated Jan. 20, 2010 (original test report)
Ref. No. 11023927 002, dated May. 3, 2011 (1
Ref. No. 11023927 002, dated May. 3, 2011 (1
st
Amendment)
Display