JBL JSR 625 (serv.man2) User Manual / Operation Manual ▷ View online
5
FRONT PANEL CONTROLS
MEMORY TUNE / PRESET BUTTON
Press the TUNE/PRESET side of this button to light up the preset
mode then use the up/down buttons momentarily to scan the
preset station frequencies. The receiver stops at each preset
location from 1–30 that has been entered in memory. Hold the
button down to skip through the presets quickly. In the TUNE mode
press these buttons to change selected frequencies.
mode then use the up/down buttons momentarily to scan the
preset station frequencies. The receiver stops at each preset
location from 1–30 that has been entered in memory. Hold the
button down to skip through the presets quickly. In the TUNE mode
press these buttons to change selected frequencies.
MEMORY BUTTON
Use this button to store an AM or FM frequency. Press this button
and select one of 30 preset locations to store the frequency with
the TUNE/PRESET buttons while the MEMORY indicator blinks,
press MEMORY again to store preset station.
and select one of 30 preset locations to store the frequency with
the TUNE/PRESET buttons while the MEMORY indicator blinks,
press MEMORY again to store preset station.
NOTE: When you store a frequency in a memory location that
already contains a frequency, you replace the previous frequency.
If your receiver is disconnected from AC power for more than about
2 weeks, it loses all stored frequencies.
already contains a frequency, you replace the previous frequency.
If your receiver is disconnected from AC power for more than about
2 weeks, it loses all stored frequencies.
SEEK / STEREO BUTTON
Press this button, “Auto” will illuminate in the display. Then press
the TUNE/PRESET button. The tuner will automatically seek out
stations in your area that have enough signal strength to be listen-
able. The tuner will stop on stations until the SEEK/STEREO but-
ton is pressed again.
the TUNE/PRESET button. The tuner will automatically seek out
stations in your area that have enough signal strength to be listen-
able. The tuner will stop on stations until the SEEK/STEREO but-
ton is pressed again.
VOLUME CONTROL
Turn the VOLUME clockwise to increase the volume and counter-
clockwise to decrease it. The volume of the front, center, and rear
channels is changed at the same time.
clockwise to decrease it. The volume of the front, center, and rear
channels is changed at the same time.
DISPLAY WINDOW
This window shows the state of operation for easier control of the
receiver. It also contains the IR Remote Sensor.
receiver. It also contains the IR Remote Sensor.
16
15
14
13
12
JSR625 Owners Manual 7/28/98 10:54 AM Page 5
6
FM INDOOR ANTENNA
Connect the supplied antenna (the wire lead) to a 300
Ω
/75
Ω
adapter and connect the adapter to the 75
Ω
T-shaped FM antenna
terminal, as shown in the Rear Panel Connection Diagram. Change
the position of the antenna until you get the best reception of your
favorite stations.
the position of the antenna until you get the best reception of your
favorite stations.
FM OUTDOOR ANTENNA
An outdoor FM antenna may be used to further improve the quality
of reception. Disconnect the indoor antenna before replacing it with
the outdoor one. A 75
of reception. Disconnect the indoor antenna before replacing it with
the outdoor one. A 75
Ω
/300
Ω
adaptor must be used.
AM LOOP ANTENNA
Tune in your favorite AM station and position the loop antenna for
best reception. Try other stations and find the position that gives the
best overall reception. When this unit is mounted in a rack or placed
on a shelf with sufficient space behind, hang the antenna on a wall
in the direction which gives the best reception.
best reception. Try other stations and find the position that gives the
best overall reception. When this unit is mounted in a rack or placed
on a shelf with sufficient space behind, hang the antenna on a wall
in the direction which gives the best reception.
NOTE: If noise is heard during AM reception, move the antenna for
better reception. To prevent undesired noise, the AM LOOP
ANTENNA should be located away from the remote control cord
over 12 inches (30cm).
better reception. To prevent undesired noise, the AM LOOP
ANTENNA should be located away from the remote control cord
over 12 inches (30cm).
TV / AUX INPUT JACKS
This input is provided for any source you want to hear. An additional
compact disc player, tape recorder, TV video cassette recorder
(VCR), etc. can be plugged into these jacks.
compact disc player, tape recorder, TV video cassette recorder
(VCR), etc. can be plugged into these jacks.
CD INPUT JACKS
Connect the output cables of a compact disc player to these jacks.
TAPE PLAY JACKS
Connect the line output of your CASSETTE DECK to these jacks.
TAPE REC JACKS
Connect the line input of your CASSETTE DECK to these jacks.
7
6
5
4
AM LOOP ANTENNA SETTING
Stand and place it on a shelf
or hang it on a wall.
or hang it on a wall.
LEG
3
2
1
CASSETTE DECK
LEFT
LEFT
RIGHT
RIGHT
VIDEO
REAR SPEAKERS 4
Ω
AC OUTLETS
UN-
SWITCHED
100W MAX
OR 1A MAX
AC 120V/60Hz
AC INPUT
AC 120V/60Hz
SWITCHED
TOTAL 100W MAX
OR 1A MAX
AC 120V/60Hz
VCR 1
1
MONITOR
IN
OUT
OUT
CD
TV/AUX
TAPE MON
PLAY
PLAY
REC
REC
AM
LOOP
FM
75
Ω
REMOTE
CONTROL
CENTER
SPEAKER
(8
Ω)
IN
ANTENNA
SERIAL NO.
MODEL NO.: JSR 625
JBL, Incorporated
NORTHRIDGE
CALIFORNIA U.S.A.
JBL, Incorporated
NORTHRIDGE
CALIFORNIA U.S.A.
OUT
RIGHT
RIGHT
(USE 8 OHM MIN SPEAKERS)
LEFT
LEFT
PRE
OUT
OUT
MAIN
IN
SUB
WOOFER
OUT
VCR 1
FRONT
SPEAKER
(8
Ω)
FM OUTDOOR ANTENNA
FM INDOOR ANTENNA
300
Ω
/75
Ω
ADAPTOR
1
300
Ω
/75
Ω
ADAPTOR
AM LOOP ANTENNA
3
4
5
REC
IN
PLAY
OUT
18
8
9
TO WALL OUTLET
TO
VCR
IN
OUT
OUT
AUDIO
VIDEO
TV MONITOR
10
13
14
12
FRONT SPEAKERS
RIGHT
LEFT
+ –
+ –
+ –
+ –
+ –
11
15
16
16
17
18
19
REAR SPEAKERS
CENTER
SPEAKER
COMPACT DISC PLAYER
6
7
2
JSR625 Owners Manual 7/28/98 10:54 AM Page 6
7
REAR PANEL CONNECTIONS
VIDEO / AUDIO INPUT (PLAY) JACKS OF VCR1
Connect these jacks to the corresponding OUTPUT jacks of your
TV (if available) or VCR.
TV (if available) or VCR.
VIDEO / AUDIO OUTPUT (REC) JACKS OF VCR1
Connect these jacks to the corresponding INPUT jacks of a VCR.
VIDEO OUTPUT jack: Connect this jack to the VIDEO INPUT jack
of the VCR. VIDEO REC jack: Connect these jacks to the AUDIO
INPUT jacks of the VCR.
VIDEO OUTPUT jack: Connect this jack to the VIDEO INPUT jack
of the VCR. VIDEO REC jack: Connect these jacks to the AUDIO
INPUT jacks of the VCR.
VIDEO MONITOR JACK
Connect this jack to the VIDEO INPUT jack of a TV/MONITOR.
REMOTE CONTROL OUT JACK
Connect this jack to the REMOTE IN jack on a JBL or Harman
Kardon component. Use one of the accessory mini-plug cables.
Kardon component. Use one of the accessory mini-plug cables.
You can control many other JBL or Harman Kardon components in
your system using the JSR 625 remote commander.
your system using the JSR 625 remote commander.
MULTI-ROOM REMOTE IN JACK
Connect a Harman Kardon HE 1000 remote IR sensor to this jack.
You can operate the unit by remote commander through the
adaptor. It is convenient when the unit is located in a separate
room.
You can operate the unit by remote commander through the
adaptor. It is convenient when the unit is located in a separate
room.
FRONT PRE OUT AND MAIN IN JACKS
Front Pre Out
When a separate power amplifier is used to drive the front speak-
ers, connect the power amplifier input to these jacks.
ers, connect the power amplifier input to these jacks.
Front Main In
When a separate pre-amplifier is connected and this unit is used
as a power amplifier, connect the pre-amplifier output to these
jacks.
as a power amplifier, connect the pre-amplifier output to these
jacks.
NOTE: When you do not use the PRE OUT and MAIN IN sepa-
rately, always connect the PRE OUT and MAIN IN jacks with a
jumper plug.
rately, always connect the PRE OUT and MAIN IN jacks with a
jumper plug.
SUBWOOFER OUTPUT JACKS
Connect a powered subwoofer to these jacks. This output may also
be used for any external component requiring a full bandwidth line-
level input.
be used for any external component requiring a full bandwidth line-
level input.
SPEAKER TERMINALS
Connect the front left (L) and right (R) speakers to the correspond-
ing terminals. Make sure that the positive (+) and negative (–) ter-
minals on the speaker are connected to the corresponding termi-
nals on the receiver.
ing terminals. Make sure that the positive (+) and negative (–) ter-
minals on the speaker are connected to the corresponding termi-
nals on the receiver.
CENTER/REAR SPEAKER TERMINALS
Connect center and rear speakers to the corresponding terminals.
When you connect the rear speakers, connect both L and R
speakers.
When you connect the rear speakers, connect both L and R
speakers.
PLEASE NOTE: Sound will not be provided through the rear
speakers unless both speakers are connected.
speakers unless both speakers are connected.
AC INPUT CORD
Plug this cord in AC outlet on a wall.
AC SWITCHED OUTLET
These outlets provide AC power. The AC power is switched by the
power button. Use this outlet for a CD player or a cassette deck.
power button. Use this outlet for a CD player or a cassette deck.
AC UNSWITCHED OUTLET
This outlet provides AC power. The AC power is not switched by
the POWER button.
the POWER button.
NOTE: Do not plug irons or toasters or other products with high
power consumption into these outlets.
power consumption into these outlets.
19
18
17
16
15
14
13
12
11
10
9
8
JSR625 Owners Manual 7/28/98 10:54 AM Page 7
8
WHEN YOU DRIVE THE FRONT SPEAKERS
WITH ANOTHER AMPLIFIER
WITH ANOTHER AMPLIFIER
(Remove PRE-OUT/MAIN IN jumpers when the front
speakers are connected to external amplifier.)
speakers are connected to external amplifier.)
LINE-INPUT
L
R
CENTER
SPEAKER
FRONT(left)
FRONT(right)
Power
LEFT
RIGHT
REAR SPEAKERS
CENTER
SPEAKER
(8
Ω)
RIGHT
RIGHT
(USE 8 OHM MIN SPEAKERS)
LEFT
LEFT
PRE
OUT
OUT
MAIN
IN
SUB
WOOFER
OUT
FRONT
SPEAKER
(8
Ω)
+ –
+ –
+ –
LINE-INPUT
PS SERIES (made by JBL)
SUBWOOFER AMP
L
R
CENTER
SPEAKER
LEFT
RIGHT
REAR SPEAKERS
CENTER
SPEAKER
(8
Ω)
RIGHT
RIGHT
(USE 8 OHM MIN SPEAKERS)
LEFT
LEFT
PRE
OUT
OUT
MAIN
IN
SUB
WOOFER
OUT
FRONT
SPEAKER
(8
Ω)
+ –
+ –
+ –
FRONT SPEAKER
REAR PANEL CONNECTIONS
WHEN YOU DRIVE THE SUBWOOFER AMP
JSR625 Owners Manual 7/28/98 10:54 AM Page 8
Click on the first or last page to see other JSR 625 (serv.man2) service manuals if exist.