DOWNLOAD JBL ES250PW (serv.man2) Service Manual ↓ Size: 3.77 MB | Pages: 56 in PDF or view online for FREE

Auto Mute/ Turn-OFF Time

5-15

minutes

5-15

T before muting, after signal is 

removed

Auto turn of time (T)   must be  5 > T < 15 

Minutes

--

LFE Input

YES

--

functional 

Single RCA Connector

Channel ID switch

YES

functional 

4 Position switch, to select wireless channels

External power supply 

requirements

18

VDC

functional 

System provided with Power supply model 

GPE-152, delivering 18VDC @ 400mA

Power consumption
Tx Standby Input Power

1

Watts

Reference 120VAC line voltage

RED LED

Tx Standby input current

0.019

Amperes

Reference 120VAC line voltage

RED LED

Tx Idle Power

2.34

Watts

Reference 120VAC line voltage

Unit in operation  Locked to Rx section Solid 

GRN

Tx Idle Power

1.64

Watts

Reference 120VAC line voltage

Unit in operation NOT locked to Rx section

Manufacturer / model

Reference

GOLDEN PROFIT ELECTRONICS LTD. GPE-

152-180040W

Output Voltage

18

VDC

Reference @ Nom. line voltage

Max output current

0.4

ADC

Reference

Rating

7.2

VA

Reference

AC input voltage range

100-240

VAC

Reference

Universal type power supply

AC input frequency

50-60

Hz

Reference

Power supply weight

0.246

Lbs

Reference 112 grams

AC power cord type

n/a

Functional

Detachable, interchangeable via a 

2 Pole IEC receptacle EN 60320 

C7

230V model will include SCHUKO and UK 

cords, 120V includes 120V US cord only

Power supply certification

YES

--

Reference

Power supply should be certified 

under the applicable standards for 

its end use EN/IEC 60065:2002

TUV/PSE

Other Parameters/Notes:
1. Volume control should be at the input buffer stage  in order to lessen the possibility of clipping the input section with highly dynamic audio material.

2. ALL SPECS SHOULD BE MEASURED AT NOMINAL LINE VOLTAGE. 

4

 
 
 
 
 
 
 
 

 

 

 

 

1 ES250PWCH 

ES250PW 

(Cherry) 

1 

 ES250PWBE 

ES250PW 

(Beech) 

1 

 ES250PWBK 

ES250PW 

(Black) 

1 

2  

Serial 

Number 

1 

3  

Date 

Label 

1 

4 431-000-06708-E 

Bottom 

Foam 

1 

5 431-000-06707-E 

Top 

Foam 

1 

6 

Visit www.jbl.com 

ES250PW Owner’s Manual 

1 

7 405-000-05181-E 

Warranty 

Card 

1 

8  

Dessicant 

1 

9 

400-000-08367-E 

Outer Carton ES250PW (Cherry) 

1 

 

400-000-08368-E 

Outer Carton ES250PW (Beech) 

1 

 

400-000-08371-E 

Outer Carton ES250PW (Black) 

1 

10  

Carton 

Label 

1 

11 

244-120-05243-1BAE 

Grille w/ logo, packaged 

1 

12 

Accessory box consisting of: 

1 

a    

Carton 

1 

b ES250PW120V-LAUNCH 

or 015-7600-00037-E 

Transmitter 1 

c   

Power Supply, transmitter 

1 

d 

151-OGPE15200-E 

120v AC cord for Power Supply 

1 

e  152-U60201A02-E 

120v AC cord for ES250PW 

1 

f  165-02000101-E 

6 ft. Audio cable RCA-RCA 

1 

g  165-045801100-E 

15 ft. Audio cable RCA-RCA 

1 

h  376-000-01092-E 

Wall Mount Bracket, transmitter 

1 

j  373-000-05067-E 

Adhesive feet, round, (set 4) 

1 

 

5

Sub In

ID

CODE

DC18V

1234

¡

Power Switch

™

Line-Level Inputs

£

LFE Input

¢

Low-Pass Selector
(Wireless Input Only)

∞

ID-Code Selector

§

Crossover Adjustment Control

¶

Subwoofer-Level (Volume) Control

•

Phase Switch

ª

Wireless Antenna

‚

Transmitter Antenna

⁄

Transmitter Power-Supply Input

B

Transmitter ID-Code Selector

‹

Transmitter Sub Input

Antenna

Crossover

[Hz]

Phase

Level

Sub In

Wireless

LFE

L

R

ff

On

O

Low-Pass

ID Code

‚

⁄

B

‹

¡

™

£

¢

∞

§

¶

•

ª

JBLP2706_ES150-250PW-120om  5/20/08  4:15 PM  Page 4

6

Choose either Wireless or Wired connection, then follow the appropriate instructions.

If your receiver/processor does not contain a Dolby Digital or DTS processor
but has subwoofer outputs:

Line In

Sub In

LFE

L

R

Crossover

[Hz]

Level

Wireless

ID Code

ff

On

O

Low-Pass

Crossover

[Hz]

Level

Line In

Sub In

LFE

L

R

ff

On

O

Low-Pass

Wireless

ID Code

ff

On

O

Low-Pass

If you have a Dolby

®

Digital or DTS

®

receiver/processor with a low-frequency

effects (LFE) or subwoofer output:

NOTE: If your receiver/processor has only one sub out, you may use 
either the L or R input.

1. Connect a subwoofer cable from the subwoofer or LFE output of your receiver

to the Sub In 

C

on the transmitter.

2. Plug the transmitter module’s power supply into the wall outlet, and connect

the included power cord to the transmitter 

A

. Make sure the Transmitter

Antenna 

‚

is extended upward.

3. Set the ID code on the transmitter and subwoofer (

B

and 

∞

) to the 

same position, as described on page 6. When connected properly, the LED
on the top of the subwoofer will be orange.

4. Set the Low-Pass Selector 

¢

to the “Off” position.

NOTES:
You may also connect a variable full-range output from an A/V receiver or
processor, such as a preamp output or second-room output. In this case, 
set the Low-Pass Selector 

¢

to the “On” position and set the crossover

adjustment as described on page 6.

Some receivers have two subwoofer outputs. In that case, use either connector.

Sub In

ID

CODE

DC18V

1234

JBLP2706_ES150-250PW-120om  5/20/08  4:15 PM  Page 5

7