DOWNLOAD JBL CINEMA SOUND 5 (serv.man2) Service Manual ↓ Size: 2.02 MB | Pages: 95 in PDF or view online for FREE

Model
CINEMA SOUND 5 (serv.man2)
Pages
95
Size
2.02 MB
Type
PDF
Document
EMC - CB Certificate
Brand
Device
Audio
File
cinema-sound-5-sm2.pdf
Date

JBL CINEMA SOUND 5 (serv.man2) EMC - CB Certificate ▷ View online

 
 
Report No. JSH006110138-001 
Page 36 of 94  
Current Test Result Summary (Run time) 
 
Test Result: Pass 
Source qualification:  Normal 
THC(A): 0.02       I-THD(pk%): 15.63         POHC(A):  0.007        POHC Limit(A):  0.251          
Highest parameter values during test: 
V_RMS (Volts):   229.74 
Frequency(Hz):   60.00 
I_Peak (Amps):  0.295 
I_RMS (Amps):  0.156 
I_Fund (Amps):  0.153 
Crest Factor: 
1.909 
Power (Watts):   30.7 
Power Factor: 
0.855 
 
Harm# Harms(avg) 100%Limit %of 
Limit  Harms(max) 150%Limit %of 
Limit Status 
 
 
2  0.001 1.080  0.1 
0.001 1.620  0.06 
Pass 
 
3  0.020 2.300  0.9 
0.020 3.450  0.59 
Pass 
 
4  0.000 0.430  0.1 
0.001 0.645  0.08 
Pass 
 
5  0.005 1.140  0.5 
0.006 1.710  0.33 
Pass 
 
6  0.000 0.300  0.1 
0.000 0.450  0.08 
Pass 
 
7  0.005 0.770  0.6 
0.005 1.155  0.42 
Pass 
 
8  0.000 0.230  0.2 
0.000 0.345  0.13 
Pass 
 
9  0.001 0.400  0.3 
0.001 0.600  0.19 
Pass 
 
10  0.000 0.184  0.2 
0.001 0.276  0.19 
Pass 
 
11  0.004 0.330  1.1 
0.004 0.495  0.73 
Pass 
 
12  0.000 0.153  0.3 
0.001 0.230  0.23 
Pass 
 
13  0.002 0.210  1.1 
0.002 0.315  0.77 
Pass 
 
14  0.000 0.131  0.3 
0.001 0.197  0.25 
Pass 
 
15  0.002 0.150  1.5 
0.002 0.225  1.05 
Pass 
 
16  0.000 0.115  0.4 
0.000 0.173  0.28 
Pass 
 
17  0.002 0.132  1.5 
0.002 0.199  1.08 
Pass 
 
18  0.000 0.102  0.3 
0.000 0.153  0.24 
Pass 
 
19  0.001 0.118  1.0 
0.001 0.178  0.70 
Pass 
 
20  0.000 0.092  0.4 
0.000 0.138  0.28 
Pass 
 
21  0.002 0.107  1.9 
0.002 0.161  1.30 
Pass 
 
22  0.000 0.084  0.4 
0.000 0.125  0.33 
Pass 
 
23  0.002 0.098  2.0 
0.002 0.147  1.36 
Pass 
 
24  0.000 0.077  0.6 
0.001 0.115  0.44 
Pass 
 
25  0.002 0.090  2.4 
0.002 0.135  1.64 
Pass 
 
26  0.000 0.071  0.6 
0.001 0.106  0.50 
Pass 
 
27  0.001 0.083  1.5 
0.001 0.125  1.07 
Pass 
 
28  0.000 0.066  0.5 
0.000 0.099  0.40 
Pass 
 
29  0.001 0.078  1.3 
0.001 0.116  0.90 
Pass 
 
30  0.000 0.061  0.5 
0.000 0.092  0.40 
Pass 
 
31  0.001 0.073  1.4 
0.001 0.109  1.01 
Pass 
 
32  0.000 0.058  0.6 
0.000 0.086  0.46 
Pass 
 
33  0.001 0.068  2.0 
0.001 0.102  1.43 
Pass 
 
34  0.000 0.054  0.8 
0.000 0.081  0.59 
Pass 
 
35  0.002 0.064  2.9 
0.002 0.096  2.06 
Pass 
 
36  0.001 0.051  1.1 
0.001 0.077  0.83 
Pass 
 
37  0.002 0.061  3.7 
0.002 0.091  2.54 
Pass 
 
38  0.001 0.048  1.8 
0.001 0.073  1.35 
Pass 
 
39  0.005 0.058  8.7 
0.005 0.087  6.01 
Pass 
 
40  0.001 0.046  1.9 
0.001 0.069  1.52 
Pass 
 
6.4 Measurement Uncertainty  
 
The measurement uncertainty for harmonic test is under consideration according to CISPR 16- 
4:2002 
 
6.5 Additions, Deviations and Exclusions from Standards  
 
 None 
 
 
Report No. JSH006110138-001 
Page 37 of 94  
7. Voltage Fluctuations-Flicker 
 
Test result 
PASS 
 
7.1 Block Diagram of Test Setup 
 
 
 
 
7.2 Test Setup and Test Procedure 
7.2.1 Definition 
 
Flicker:  
impression of unsteadiness of visual sensation induced by a lighting stimulus whose  
 
 
 
luminance or spectral distribution fluctuates with time. 
 
 
Pst:   
Short-term flicker indicator The flicker severity evaluated over a short period (in  
 
 
 
minutes); Pst=1 is the conventional  threshold of irritability  
 
Plt:   
long-term flicker indicator; the flicker severity evaluated over a long period (a few 
hous) 
 
 
 
Using successive Pst valuse. 
 
dc:   
the relative steady-state voltage change 
 
dmax: 
the maximum relative voltage change 
 
d(t):  
the value during a voltage change  
7.2.2  Photo For test Set-up 
 
none
Harmonic & flicker 
test system 
 
     EUT 
 
 
Report No. JSH006110138-001 
Page 38 of 94  
 
7.3 Test Protocol 
 
The tested object operated under the operating condition specified in EN61000-3-
3:1995/+A1:2001 
The following limits apply 
 
-- “dc” shall not exceed 3.3%. 
-- “dmax” shall not exceed 4/6/7% 
--    d(t)  shall not exceed 3.3% for more than 500ms. 
 
 
The appliance has rated input power less than 75W, and it has no means to 
generate significant voltage flick and fluctuation, No test required. 
 
Temperature  
20 
°C 
   
Relative Humidity 
 45 % 
 
 
Test Result: Pass 
Status: Test Completed 
 
 
U
Pst
UBU
i
UBU
 and limit line
U
 
 
 
U
0.25
0.50
0.75
1.00
  
Pst
15:35:10
 
U
Plt and limit line 
4.25
4.50
4.75
  
Plt[e-2]
15:35:10
 
Parameter values recorded during the test: 
 
Vrms at the end of test (Volt): 
229.70 
Highest dt (%): 
-0.42 
Test limit (%): 
3.30 
Pass 
Time(mS) > dt:   
0.0 
Test limit (mS): 
500.0 
Pass 
Highest dc (%): 
0.00 
Test limit (%): 
3.30 
Pass 
Highest dmax (%): 
-0.39 
Test limit (%): 
4.00 
Pass 
Highest Pst (10 min. period):         0.103 
Test limit:                1.000 
Pass 
 
 
 
 
 
 
 
 
 
Report No. JSH006110138-001 
Page 39 of 94  
 
Notes: * means for  
4% limit, without additional conditions 
 
                             6% limit, switched manually or automatically more than twice per day 
 
                             7% limit, switched automatically for no more than twice per day or attended    
                                    while in use. 
 
 
7.4 Measurement Uncertainty 
 
Measurement uncertainty for voltage fluctuation and flicker is under consideration according to 
CISPR  16-4-2:2003. 
 
 
7.5 Additions, deviations and exclusions from standards  
 
None 
Page of 95
Display

Click on the first or last page to see other CINEMA SOUND 5 (serv.man2) service manuals if exist.