JBL AUTHENTICS L8 (serv.man4) EMC - CB Certificate ▷ View online
Report No.: EM201300471-1 Application No.:
ZJ00032008 Page 13 of 57
FOR GFSK:
Report No.: EM201300471-1 Application No.:
ZJ00032008 Page 14 of 57
FOR 8DPSK:
Report No.: EM201300471-1 Application No.:
ZJ00032008 Page 15 of 57
Report No.: EM201300471-1 Application No.:
ZJ00032008 Page 16 of 57
4.2 FREQUENCY RANGE
4.2.1 LIMITS
EN300 328 clause 4.3.3
fL > 2,4 GHz and fH < 2,4835 GHz
4.2.2 TEST PROCEDURE
Test EUT in normal conditions, and then repeat in extreme conditions.
Measurement RBW = 100 kHz, VBW ≥ 100 kHz, average mode with 60 second sweeps selected.
Pre-test the 3 modulation to find GFSK and 8DPSK is worse case, so only record GFSK and 8DPSK test data.
Measurement RBW = 100 kHz, VBW ≥ 100 kHz, average mode with 60 second sweeps selected.
Pre-test the 3 modulation to find GFSK and 8DPSK is worse case, so only record GFSK and 8DPSK test data.
4.2.3 TEST SETUP
4.2.4 TEST RESULTS
Measurement Conditions
Frequency spot with level
≤ -30dBm/100KHz
≤ -30dBm/100KHz
Limit (MHz)
Temperature(°C)
Voltage
FL FH Lower Higher
For GFSK
AC Power
+25 ACnom
2401.26
2480.69
FL>2400.0
FH< 2483.5
0
ACmin 2401.25
2480.67
ACmax 2401.23 2480.64
+70
ACmin 2400.21
2480.65
ACmax 2400.24 2480.66
For 8DPSK
AC Power
+25 ACnom
2400.50
2480.75
FL>2400.0
FH< 2483.5
0
ACmin 2400.48
2480.71
ACmax 2400.49 2480.73
Antenna
EUT
Receiver
Click on the first or last page to see other AUTHENTICS L8 (serv.man4) service manuals if exist.