DOWNLOAD Harman Kardon SOUNDSTICKS III (serv.man2) Service Manual ↓ Size: 2.1 MB | Pages: 85 in PDF or view online for FREE

 

 

- Page 35 of 48 - 

 

 

 Report 

No. 

158002 

 

 
TRF No.:IECEN60950_1C 

 

6.1.2.1 

In Finland, Norway and Sweden, add the following text between the first and 
second paragraph of the compliance clause: 
If this insulation is solid, including insulation forming part of a component, it shall at 
least consist of either 
- 

two layers of thin sheet material, each of which shall pass the electric  

 

strength test below, or 

- 

one layer having a distance through insulation of at least 0,4 mm, which 

shall  
 

pass the electric strength test below. 

If this insulation forms part of a semiconductor component (e.g. an optocoupler), 
there is no distance through insulation requirement for the insulation consisting of 
an insulating compound completely filling the casing, so that CLEARANCES and 
CREEPAGE DISTANCES do not exist, if the component passes the electric 
strength test in accordance with the compliance clause below and in addition 
- 

passes the tests and inspection criteria of 2.10.11 with an electric strength  

 

test of 1,5 kV multiplied by 1,6 (the electric strength test of 2.10.10 shall be  

 

performed using 1,5 kV), and 

- 

is subject to ROUTINE TESTING for electric strength during manufacturing, 

 

using a test voltage of 1,5 kV. 

It is permitted to bridge this insulation with a capacitor complying with 
EN 132400:1994, subclass Y2. 
A capacitor classified Y3 according to EN 132400:1994, may bridge this insulation 
under the following conditions: 
- 

the insulation requirements are satisfied by having a capacitor classified Y3 

 

as defined by EN 132400, which in addition to the Y3 testing, is tested with  

 

an impulse test of 2,5 kV defined in EN 60950-1:2006, 6.2.2.1; 

- 

the additional testing shall be performed on all the test specimens as  

 

described in EN 132400; 

- 

the impulse test of 2,5 kV is to be performed before the endurance test in 

 

EN 132400, in the sequence of tests as described in EN 132400. 

N/A 

6.1.2.2 

In Finland, Norway and Sweden, the exclusions are applicable for 
PERMANENTLY CONNECTED EQUIPMENT, PLUGGABLE EQUIPMENT TYPE 
B and equipment intended to be used in a RESTRICTED ACCESS LOCATION 
where equipotential bonding has been applied, e.g. in a telecommunication centre, 
and which has provision for a permanently connected PROTECTIVE EARTHING 
CONDUCTOR and is provided with instructions for the installation of that conductor 
by a SERVICE PERSON.  

N/A 

7.2 

In Finland, Norway and Sweden, for requirements see 6.1.2.1 and 6.1.2.2 of this 
annex. 
The term TELECOMMUNICATION NETWORK in 6.1.2 being replaced by the term 
CABLE DISTRIBUTION SYSTEM. 

N/A 

7.3 

In Norway and Sweden, for requirements see 1.2.13.14 and 1.7.2.1 of this annex.

N/A 

7.3 

In Norway, for installation conditions see EN 60728-11:2005. 

N/A 

ZC 

A-DEVIATIONS (informative)  

— 

 

 

- Page 36 of 48 - 

 

 

 Report 

No. 

158002 

 

 
TRF No.:IECEN60950_1C 

 

1.5.1 

 (Ordinance 1990:944) 

Add the following: 

NOTE In Sweden, switches containing mercury are not permitted. 

N/A 

1.5.1 

 (Ordinance on environmentally hazardous substances SR 814.081, 

Annex 1.7, Mercury - Annex 1.7 of SR 814.81 applies for mercury.) 
Add the following: 

NOTE In Switzerland, switches containing mercury such as thermostats, relays and level 
controllers are not allowed. 

N/A 

1.7.2.1 

 (Heavy Current Regulations) 

Supply cords of CLASS I EQUIPMENT, which is delivered without a plug, must be 
provided with a visible tag with the following text: 

Vigtigt! 

Lederen med grøn/gul isolation 

må kun tilsluttes en klemme mærket 

 eller   

If essential for the safety of the equipment, the tag must in addition be provided 
with a diagram, which shows the connection of the other conductors, or be 
provided with the following text: 
“For tilslutning af de øvrige ledere, se medfølgende installationsvejledning.” 

N/A 

1.7.2.1 

 (Gesetz über technische Arbeitsmittel und Verbraucherprodukte (Geräte- 

und Produktsicherheitsgesetz – GPSG) [Law on technical labour equipment and 
consumer products], of 6th January 2004, Section 2, Article 4, Clause (4), Item 2). 
If for the assurance of safety and health certain rules during use, amending or 
maintenance of a technical labour equipment or readymade consumer product are 
to be followed, a manual in German language has to be delivered when placing the 
product on the market. 
Of this requirement, rules for use even only by SERVICE PERSONS are not 
exempted. 

N/A 

1.7.5 

 (Heavy Current Regulations) 

With the exception of CLASS II EQUIPMENT provided with a socket outlet in 
accordance with the Heavy Current Regulations, Section 107-2-D1, Standard 
Sheet DK 1-4a, CLASS II EQUIPMENT shall not be fitted with socket-outlets for 
providing power to other equipment. 

N/A 

1.7.13 

(Ordinance on chemical hazardous risk reduction SR 814.81, Annex 

2.15 Batteries) 
Annex 2.15 of SR 814.81 applies for batteries. 

N/A 

5.1.7.1 

(Heavy Current Regulations, Chapter 707, clause 707.4) 

TOUCH CURRENT measurement results exceeding 3,5 mA r.m.s. are permitted 
only for PERMANENTLY CONNECTED EQUIPMENT and PLUGGABLE 
EQUIPMENT TYPE B. 

N/A 

 

 

- Page 37 of 48 - 

 

 

 Report 

No. 

158002 

 

 
TRF No.:IECEN60950_1C 

 

 

1.5.1 

TABLE: List of critical components 

P 

 

object/part No. 

manufacturer/ 
trademark 

type/model 

technical data 

standard 

mark(s) of 
conformity

1

)

AC/DC Adapter 

2

) 

LEADER 
ELECTRONICS 
INC 

NU40-2160150-I3

Input: 
100-240Vac, 
50/60Hz, 1.2A 
Max. 
 
Output:  
16V DC, 1.5A 
Class II 

IEC 60950-
1:2ed+A1 
EN 60950-
1:2ed+A11+
A1 
 

ITS  

PCB material 

Various 

Various 

V-0, 105

C  

UL796, UL94 UL 

Enclosure 

Various Various Min HB, min. 

3.0mm thick 

UL94 UL 

Power amplifier 
IC (U12) 

Philips 

TDA8512J 

26 W x 1 Sub 
output, 
13 W x 2 
Satellite output

 

IEC 60950-1 Tested in 

equipment 

Power amplifier 
IC (U12)  
Alt.) 

Philips 

TDA8561Q 

24 W x 1 Sub 
output, 
12 W x 2 
Satellite output

 

IEC 60950-1 Tested in 

equipment 

Subwoofer Various 

Various 

4Ω 

IEC 60950-1 Test in the 

equip.  

Satellite speaker 
x 2 

Various Various (4) 

8Ω, in 

parallel. Nominal 
2 Ω 

IEC 60950-1 Test in the 

equip.  

Supplementary information: 

1

) An asterisk indicates a mark which assures the agreed level of surveillance 

2

) AC/DC adapter (see attached CB certificate (Cert. No. SE-63879) and Test Report (Ref. No. 

TP10110227-ST)(106 pages) from Intertek Testing Services Taiwan Ltd. 

 

 

 

- Page 38 of 48 - 

 

 

 Report 

No. 

158002 

 

 
TRF No.:IECEN60950_1C 

 

 

1.5.1 

TABLE: Opto Electronic Devices 

N/A 

 

Manufacturer ............................................... :  
 

 

Type ............................................................. :  
 

 

Separately tested ........................................ :  
Bridging insulation ....................................... :  
External creepage distance ......................... :  
 

 

Internal creepage distance ..........................  :  
 

 

Distance through insulation .........................  :  
 

 

Tested under the following conditions ......... :  
Input ............................................................. :  
Output ..........................................................  :  

supplementary information