Harman Kardon HKTS 60 Service Manual ▷ View online
10
PL0004-01001
LEFT
LFE SUB
OUTPUT
12V
TRIGGER
OUTPUT
+
–
+
–
+
–
+
–
+
–
+
–
+
–
RIGHT
SURROUND
FRONT
CENTER
Subwoofer
Receiver
Trigger Cable
(Black Ends)
(Black Ends)
Connecting to a Trigger Voltage Source
If your preamp/processor or another audio/video component has a trigger
voltage connection that supplies between 3 and 30V (AC or DC), connect
it to the HKTS200SUB’s
External Trigger Input Connector . If the
component’s trigger voltage connection has a 3.5mm mini jack you can
use the supplied combination LFE/trigger cable to make the connection.
5
harman/kardon
HKTS 20/30/60 -230V Service Manual
Page 21 of 46
11
Operation
Turning the Subwoofer On and Off
Set the HKTS200SUB’s
Power Switch to the ON position.
• If the
Power On Mode Switch is set to AUTO,
the HKTS200SUB will automatically turn itself on when it receives an
audio signal, and it will go into standby mode when it has
received no audio signal for 15 minutes. The HKTS200 SUB’s LED will
illuminate white when the subwoofer is on, and will not be
illuminated when the subwoofer is in standby.
• If the
Power On Mode Switch is set to ON, the HKTS200SUB
will remain on at all times. The HKTS200 SUB’s LED will illuminate
white.
• If the
External Trigger Input Connector is connected to a
trigger voltage source, the HKTS200SUB will turn on whenever a
trigger voltage is present, and will turn off after the trigger voltage
ceases, regardless of the position of the
Power On Mode Switch .
If you will be away from home for an extended period of time, or if
you will not be using the subwoofer for an extended period, switch
the
Power Switch to the OFF Position.
Subwoofer Adjustments: Volume
Use the
Subwoofer Level Control to set the HKTS200SUB’s
volume. Turn the knob clockwise to increase the subwoofer’s volume;
turn the knob counterclockwise to decrease the subwoofer’s volume.
8
8
4
4
4
1
5
Subwoofer Adjustments: Phase
The
Phase Switch determines whether the HKTS200SUB’s
piston-like action moves in and out in phase with the satellite
speakers. If the subwoofer were to play out of phase with the
satellite speakers, the sound waves produced by the subwoofer
could be canceled out, reducing bass performance and sonic
impact. This phenomenon depends in part on the relative
placement of all the speakers in the room.
speakers. If the subwoofer were to play out of phase with the
satellite speakers, the sound waves produced by the subwoofer
could be canceled out, reducing bass performance and sonic
impact. This phenomenon depends in part on the relative
placement of all the speakers in the room.
Although in most cases the
Phase Switch should be left in the
NORMAL position, there is no absolute correct setting for the
Phase Switch . When the HKTS200SUB is properly in phase
with the satellite speakers, the sound will be clearer and have
maximum impact. This will make percussive sounds like drums,
piano and plucked strings sound more lifelike. The best way to
set the
Phase Switch . When the HKTS200SUB is properly in phase
with the satellite speakers, the sound will be clearer and have
maximum impact. This will make percussive sounds like drums,
piano and plucked strings sound more lifelike. The best way to
set the
Phase Switch is to listen to music that you are familiar
with and set the switch in the position that gives drums and other
percussive sounds maximum impact.
percussive sounds maximum impact.
Subwoofer Adjustments: Bass Boost
When set to the ON position, the Bass Boost Switch enhances
low-frequency performance, resulting in bass with more impact,
which you may prefer while watching movies or listening to music.
There is no harm in experimenting with this control – setting the
switch to the OFF position will return normal low-frequency
performance.
low-frequency performance, resulting in bass with more impact,
which you may prefer while watching movies or listening to music.
There is no harm in experimenting with this control – setting the
switch to the OFF position will return normal low-frequency
performance.
2
3
3
3
3
Troubleshooting
• Check that the receiver/amplifier is on and a source is playing.
• Make sure that all wires and connections between the receiver/amplifier
and the speakers are connected properly.
• Make sure none of the speaker wires is frayed, cut or punctured.
• Review the proper operation of your receiver/amplifier.
• Check that the balance control on your receiver/amplifier is not set all the
way to one channel.
• Check your receiver/amplifier’s speaker setup procedure to make sure that
the speaker in question has been enabled and its volume level has not been
turned all the way down.
• Make sure that all wires and connections between the receiver/amplifier
and the speaker are connected properly.
• Make sure the speaker wires are not frayed, cut or punctured.
• Check your receiver/amplifier’s speaker setup procedure to make sure that
the center speaker has been enabled and its volume level has not been
turned all the way down.
• Make sure that all wires and connections between the receiver/amplifier
and the center speaker are connected properly.
• Make sure the speaker wires are not frayed, cut or punctured.
• If your receiver is operating in Dolby
®
Pro Logic
®
mode, make sure that the
center speaker is not set to Phantom.
• Check your receiver/amplifier’s speaker setup procedure to make sure that
the surround speakers have been enabled and their volume levels have not
been turned all the way down.
• Make sure that all wires and connections between the receiver/amplifier
and the surround speakers are connected properly.
• Make sure the speaker wires are not frayed, cut or punctured.
• Review proper operation of your receiver/processor and its surround-
sound features.
• Make sure the movie or TV show you’re watching has been recorded in a
surround-sound mode. If it is not, check to see if your receiver/amplifier has
a different surround-sound mode that you can use.
• Review the operation of your DVD player and the DVD jacket to make sure the
DVD features the desired Dolby Digital or DTS
®
surround-sound mode,
and that you have properly selected that mode using both the DVD player’s
menu and the disc’s menu.
If there is no sound from any of the speakers:
If there is no sound coming from one speaker:
If there is no sound coming from the center speaker:
If there is no sound coming from the surround speakers:
If there is no sound coming from the subwoofer:
• Check that the subwoofer’s
Power Cord is plugged into a working
AC outlet.
• Check that the subwoofer’s
Power Switch is in the ON position.
• Check that the
Subwoofer Level Control is not turned all the way down
(fully counterclockwise).
• Check the audio connection between your receiver/processor and
the subwoofer.
• Check your receiver/amplifier’s speaker setup procedure to make sure that
the subwoofer has been enabled and its volume level has not been turned
all the way down.
9
8
1
If the system plays at low volumes but shuts off as volume is increased:
• Make sure that all wires and connections between the receiver/amplifier
and the speakers are connected properly.
• Make sure none of the speaker wires is frayed, cut or punctured.
• If you’re using more than one pair of main speakers, check to be sure that
you’re not operating the system below the receiver/amplifier’s minimum
impedance requirements.
harman/kardon
HKTS 20/30/60 -230V Service Manual
Page 22 of 46
12
Specifications
HKTS60 System
CEN-TS60
HKTS200SUB Subwoofer
SAT-TS60 Satellites
Harman Consumer Group, Inc.
8500 Balboa Boulevard, Northridge, CA 91329 USA
516.255.4545 (USA only)
8500 Balboa Boulevard, Northridge, CA 91329 USA
516.255.4545 (USA only)
www.harmankardon.com
Made in P.R.C.
© 2009 Harman International Industries, Incorporated. All rights reserved.
Features, specifications and appearance are subject to change without notice.
Harman Kardon is a trademark of Harman International Industries, Incorporated, registered in the United States
and/or other countries. Designed to Entertain is a trademark of Harman International Industries, Incorporated.
Dolby and Pro Logic are registered trademarks of Dolby Laboratories.
DTS is a registered trademark of Digital Theater Systems, Inc.
Part # 444024-001
Frequency Response
45Hz – 20kHz (-6dB)
Recommended Power
20 ~ 150 watts
Impedance
8 ohms nominal
Sensitivity
83dB @ 2.83V/1 meter
Tweeter
One 1" (25mm) CMMD Lite dome,
video-shielded
Midrange
Dual 3" (75mm) flat-diaphragm
drivers, video-shielded
Dimensions (H x W x D)
4-11/32" x 10-11/32" x 3-15/32"
(110mm x 272mm x 88mm)
Weight
3.3 lb (1.5kg)
Input rating:
AC 100–120V, 50/60 Hz, 200W or
AC 220–240V, 50/60 Hz, 200W
Amplifier Power
200 watts RMS
Bass
8" woofer, sealed enclosure
External Trigger Input Voltage
3 ~ 30 volts AC/DC
Dimensions (H x W x D)
13-29/32" x 10-1/2" x 10-1/2"
(353mm x 267mm x 267mm)
Gross Weight
19.8 lb (9kg)
Recommended Power
20 ~ 150 watts
Impedance
8 ohms nominal
Sensitivity
83dB @ 2.83V/1 meter
Tweeter
One 1" (25mm) CMMD Lite dome,
video-shielded
Midrange
Dual 3" (75mm) flat-diaphragm drivers,
video-shielded
Dimensions – including stands (H x W x D)
11-25/32" x 4-11/32" x 3-15/32"
(299mm x 110mm x 88mm)
Weight
3.4 lb (1.55kg)
harman/kardon
HKTS 20/30/60 -230V Service Manual
Page 23 of 46
HKTS 60BQ/230
Home Theater Speaker System
Owner’s Manual
ENGLISH
harman/kardon
HKTS 20/30/60 -230V Service Manual
Page 24 of 46
Click on the first or last page to see other HKTS 60 service manuals if exist.