Harman Kardon HK 3380 (serv.man10) EMC - CB Certificate ▷ View online
-
IEC 60065, 6th edition : 1998
-
- Page 20 of 37 -
Order
No.
14649
14.3.4.3
Separating transformers with at least
basic insulation
basic insulation
N
14.3.5.1
Class II transformers have adequate
insulation between hazardous live
parts and accessible parts (double or
reinforced insulation)
insulation between hazardous live
parts and accessible parts (double or
reinforced insulation)
Double or reinforced insulation between hazardous live
windings and accessible conductive parts.
windings and accessible conductive parts.
P
Coil formers and partition walls
≥
0,4 mm
The bobbin fulfils the requirement of reinforced insulation,
see table above for bobbin thickness.
see table above for bobbin thickness.
P
14.3.5.2
Class I transformers have adequate
insulation between hazardous live
parts and accessible conductive
parts or those conductive parts or
protective screens connected to a
protective earth terminal
insulation between hazardous live
parts and accessible conductive
parts or those conductive parts or
protective screens connected to a
protective earth terminal
N
Winding wires connected to
protective earth have adequate
current-carrying capacity
protective earth have adequate
current-carrying capacity
N
14.4
High voltage components
N
High-voltage components and
assemblies: U > 4 kV (peak)
separately approved
assemblies: U > 4 kV (peak)
separately approved
No high voltage components used
N
Component meets category FV 1 of
IEC 60 707
IEC 60 707
N
14.4.1
High voltage transformers and
multipliers tested as part of the
submission
multipliers tested as part of the
submission
N
14.5 Protective
devices
P
Protective devices used within their
ratings
ratings
Yes,
Thermal link and fuse
Thermal link and fuse
P
External clearance and creepage
distances appropriate for the voltage
across the device when opened
distances appropriate for the voltage
across the device when opened
Adequate external clearance and creepage distance
P
14.5.1.1
a) Thermal cut-outs separately
approved
approved
None
N
b) Thermal cut-outs tested as part of
the submission
the submission
N
14.5.1.2
a) Thermal links separately
approved
approved
a) Mains transformer (Mfr. / type):
Anzen Dengu Co., Ltd. / L7F
Certified by: VDE according to IEC60691
b) Sub. Transformer (Mfr. / type):
Uchihashi Estec Co., Ltd. / 423
Certified by: VDE according to IEC60691
P
b) Thermal links tested as part of the
apparatus
apparatus
N
-
IEC 60065, 6th edition : 1998
-
- Page 21 of 37 -
Order
No.
14649
14.5.1.3
Thermal devices resettable by
soldering
soldering
No such thermal device
N
14.5.2.1
Fuse-links in the mains circuit
according to IEC 60 127
according to IEC 60 127
See list below
P
Circuit Manufacturer
Dimen- Approved
Marking
of Marking
Current
diagram
sions
by
rated current,
close to
through
informa-
pre-arcing time
the com-
the fuse
tion
and current
ponent
in normal
Part No
characteristic
operation
F601 (pr.)
Orisel Co., Ltd.
5
××××
20 mm
VDE
T 4A L 250V
T 4A L 250V
1,12 A
F602 (pr.)
Save Fusetech Inc.
8
φφφφ
x 8mm
VDE
T 2.5A 250V
T 2.5A L 250V
< 0,50 A *)
F603, F604 Orisel Co., Ltd.
5
××××
20 mm
VDE
T 6.3A L 250V
T 6.3A L 250V
2,91 A
*) Calculated through current for mains socket-outlet: SWITCHED, 100W
14.5.2.2
Correct marking of fuse-links
adjacent to holder
adjacent to holder
Correct marking applied close to the fuse, see table
above.
above.
P
14.5.2.3
Not possible to connect fuses in
parallel
parallel
No fuse holder so designed that fuse-links can be
connected in parallel
connected in parallel
P
14.5.2.4
Not possible to touch hazardous
live parts when replacing fuse-
links without the use of a tool
live parts when replacing fuse-
links without the use of a tool
No replacement of fuse possible by hand.
P
14.5.3
PTC-S thermistors comply with
IEC 60 738
IEC 60 738
No PTC’s
N
PTC-S devices (>15 W)
category FV 1 or better
category FV 1 or better
N
14.5.4
Other protective devises.
Circuit protectors have
adequate breaking capacity and
their position is correctly marked
Circuit protectors have
adequate breaking capacity and
their position is correctly marked
No other protective devices
N
14.6 Switches
P
Manually operated mechanical
switch (MOMS) conductively
connected to the mains
switch (MOMS) conductively
connected to the mains
No MOMS
N
Part No
Function
Manufacturer
Type
Rated
Marking
Marking
All-
One
Name
Trademark
V
A
Surge
pole
pole
current
RY61 x Tyco
Electronics.
OEG
SDT-S-112DMR
250 8
120A
14.6.1
Permanently connected equipment
provided with an all-pole mains
switch unless 5.4.2 is met
provided with an all-pole mains
switch unless 5.4.2 is met
Apparatus is not permanently connected
N
-
IEC 60065, 6th edition : 1998
-
- Page 22 of 37 -
Order
No.
14649
14.6.2
Manually operated mechanical
switch (MOMS), required where
power consumption > 15 W and/or
peak voltage > 4 kV
switch (MOMS), required where
power consumption > 15 W and/or
peak voltage > 4 kV
No MOMS required. See below.
N
Switch readily accessible and not in
mains cord
mains cord
Switch located on the front and readily accessible
P
Exception for automatic switching
The apparatus has a (sleep) timer function
P
Exception for continuous operation
The apparatus is not intended for continuous operation
N
14.6.3
Manually operated mechanical
switch (MOMS): Switch indication /
On position clearly discernible
switch (MOMS): Switch indication /
On position clearly discernible
No MOMS
N
Indication by marking meets Cl. 5
N
Indication of the OFF position
N
14.6.4
Manually operated mechanical
switch (MOMS) fitted. Is there a
Stand-by mode
switch (MOMS) fitted. Is there a
Stand-by mode
No MOMS, but standby mode provided.
P
Stand-by mode clearly discernible
By illumination (LED)
P
Exception for low Stand-by current
< 0,7 mA (peak)
< 0,7 mA (peak)
N
14.6.5
Components bridging contacts of
mains switches comply with 14.1 a)
or 14.2.2
mains switches comply with 14.1 a)
or 14.2.2
Yes. See also clause 14.2.
P
14.6.6.a.
Manually operated mechanical
switches (MOMS) separately
approved to IEC 61 058-1
switches (MOMS) separately
approved to IEC 61 058-1
Yes. Mains relay, certified by SEMKO.
P
14.6.6.b.
Manually operated mechanical
switch (MOMS) tested as part of the
equipment complies with 14.6.7,
14.6.10 and 20.1.4 and meets 14.6.8
and/or 14.6.9 and Annex G (G1.1)
switch (MOMS) tested as part of the
equipment complies with 14.6.7,
14.6.10 and 20.1.4 and meets 14.6.8
and/or 14.6.9 and Annex G (G1.1)
N
Flame test for mains switches
N
14.6.7 Endurance
test
N
14.6.8
Temperature rise in mains switch
N
14.6.9
Dielectric strength test
N
14.6.10
Surge current for mains switches
also controlling mains socket-outlets
also controlling mains socket-outlets
Measured relay current = 14 A.
Calculated outlet current (100W) = 20 A*
Total surge current = 14 A. + 20 A* = 34 A.
The measured and calculated surge current value is less
than rated surge current rating. OK.
Calculated outlet current (100W) = 20 A*
Total surge current = 14 A. + 20 A* = 34 A.
The measured and calculated surge current value is less
than rated surge current rating. OK.
P
-
IEC 60065, 6th edition : 1998
-
- Page 23 of 37 -
Order
No.
14649
14.7 Safety
interlocks
N
Safety interlocks to 2.8 of
IEC 60 950
IEC 60 950
No safety interlock
N
14.8
Voltage setting devices
N
Voltage setting device not likely to be
changed accidentally
changed accidentally
No voltage selector
N
14.9 Motors
No motors
N
14.9.1
Endurance test on motors
N
Motor start test
N
Dielectric strength test
N
14.9.2
Not adversely affected by oil or
grease etc.
grease etc.
N
14.9.3
Protection against moving parts
No moving parts
N
14.9.4
Motors with phase-shifting
capacitors, three-phase motors and
series motors meet Cl. B.8, B.9 and
B.10 of IEC 60 950, Annex B
capacitors, three-phase motors and
series motors meet Cl. B.8, B.9 and
B.10 of IEC 60 950, Annex B
N
14.10 Batteries
N
14.10.1
Batteries mounted with no risk of
accumulation of flammable gases
accumulation of flammable gases
No batteries
N
14.10.2
No possibility of recharging non-
rechargeable batteries
rechargeable batteries
N
14.10.3
Recharging currents and times
within manufacturers limits
within manufacturers limits
N
Lithium batteries discharge and
reverse currents within the
manufacturers limits
reverse currents within the
manufacturers limits
N
14.11 Optocouplers
N
Optocouplers comply with Cl. 8
No optocouplers.
N
Internal and external dimensions to
13.1.1
13.1.1
N
Click on the first or last page to see other HK 3380 (serv.man10) service manuals if exist.