Harman Kardon HD 980 (serv.man4) EMC - CB Certificate ▷ View online
Test report no. SH08050534-001
Page 36 of 67
10.1.3 Performance Criterion
Performance criterion A
Performance criterion A
10.2 Block Diagram of Test Setup
10.3 Test Setup and Test Procedure
Measurement was performed in shielded room.
Instruments used were following CISPR 16-1 and EN 55020.
Measurement methods and operation conditions of EUT was according to clause 5.1,
Instruments used were following CISPR 16-1 and EN 55020.
Measurement methods and operation conditions of EUT was according to clause 5.1,
5.2 and 5.3.2 of EN55020.
Test report no. SH08050534-001
Page 37 of 67
10.4 Test protocol
Temperature
:
°C
Relative Humidity:
%
Channel Unwanted
signal
N-5 N-1 N+1 N+5 N+9 N+11
A
B
C
Ni/E3 (Television
Sound)
D
A
B
C
Ni/E3(Television
Picture)
D
A
B
C
Niii/E9(Television
Sound)
D
A
B
C
Niii/E9 (Television
Picture)
D
A
B
C
Niv/E25 (Television
Sound)
D
A
B
C
Niv/E25 (Television
Picture)
D
A
B
C
Nv/E55 (Television
Sound)
D
A
B
C
Nv/E55 (Television
Picture)
D
A
B
C
Channel:
375.25MHz
(Television Sound)
D
A
B
C
Channel:
375.25MHz
(Television Picture)
D
“*” means margin > 6 dB
Test report no. SH08050534-001
Page 38 of 67
Type E unwanted signal ( S1A):
Frequency (MHz)
Level ([dB(uV)} e.m.f.
26-30(Ni) / Television Picture
26-30(Niii) / Television Picture
26-30(Ni) / Television Sound
26-30(Niii) / Television Sound
“*” means margin > 10 dB
10.5 Additions, Deviations and Exclusions from Standards
None
Test report no. SH08050534-001
Page 39 of 67
11. Immunity requirements at mains, loudspeaker and headphone
output connector (S2a)
Test result: Pass
11.1 Limits and Performance Criterion
11.1.1 Limits
11.1.2 Performance Criterion
Performance criterion A
Performance criterion A
11.2 Block Diagram of Test Setup
11.3 Test Setup and Test Procedure
Click on the first or last page to see other HD 980 (serv.man4) service manuals if exist.