Harman Kardon HD 980 (serv.man4) EMC - CB Certificate ▷ View online
Test report no. SH08050534-001
Page 32 of 67
9.1.2 Performance Criterion
Performance criterion A
Performance criterion A
9.2 Block Diagram of Test Setup
9.3 Test Setup and Test Procedure
Measurement was performed in shielded room.
Instruments used were following CISPR 16-1 and EN 55020.
Measurement methods and operation conditions of EUT was according to clause 5.1,
Instruments used were following CISPR 16-1 and EN 55020.
Measurement methods and operation conditions of EUT was according to clause 5.1,
5.2 and 5.3.1 of EN55020.
Test report no. SH08050534-001
Page 33 of 67
9.4 Test Protocol
Temperature
:
°C
Relative Humidity:
%
Recorded data
Fn (MHz)
Ff(MHz)
mono Stereo
66.2(a)
76.9
87.1
87.2
87.1
87.2
87.25
87.30
87.35
87.40
87.45
87.6
87.50
129.3(b)
118.6
108.4
108.3
108.25
108.20
108.15
108.10
108.05
107.9
108.00
(a) Only applicable for receivers with the local oscillator frequency below the tuned
frequency.
(b) Only applicable for receivers with the local oscillator frequency above the tuned
frequency.
Test report no. SH08050534-001
Page 34 of 67
Nf [dB(uV)] (75
Ω) 1kHz FN dev, 40kHz
Fn(MHz) Ff(MHz)
mono Stereo
97.5 and 98.5
97.6 and 98.4
97.65 and 98.35
97.7 and 98.3
97.75 and 98.25
97.8 and 98.2
97.85 and 98.15
97.9 and 98.1
97.925 and 98.075
97.95 and 98.05
97.975 and 98.025
98
98
“*” means margin > 6 dB
Test report no. SH08050534-001
Page 35 of 67
10. Input immunity to RF voltages (in differential mode) of television
receivers and video tape equipment (including satellite television
receivers) (S1, S1a)
receivers) (S1, S1a)
Test result: NA
10.1 Limits and Performance Criterion
10.1.1 Limits for S1
10.1.2 Limits for S1a
Click on the first or last page to see other HD 980 (serv.man4) service manuals if exist.