Harman Kardon HD 980 (serv.man3) EMC - CB Certificate ▷ View online
Page 35 of 57 Report No. SH08050531-001
Appendix no. 1 Photos of the product:
TRF No: IEC/EN 60065H
TRF originator Intertek ETL SEMKO SH
Object/part No.
Manufacturer/
trademark
Type/model
Technical data
Standard
Mark(s) of
conformity
(alternative) CHANGYUAN
ELECTRONICS(
SHENZHEN)
PTFE CB-TT
200℃, VW-1
IEC 60065
UL: E180908
and tested
with appliance
Plastic shell
SHANGHAI
PRET
COMPOSITES
CO LTD
4330R Thickness
min.
1.7mm, V-0,
60℃
IEC60695-11-10 UL: E301296
and tested
with appliance
(alternative) SHANGHAI
GENIUS
ADVANCED
MATERIAL CO
LTD
567W Thickness
min.
1.6mm, V-0,
60℃
IEC60695-11-10 UL: E210337
and tested
with appliance
(alternative) GUANGZHOU
KINGFA
SCIENCE&TECH
NOLOGY CO
LTD
FRABS-518 Thickness
min.
1.6mm, V-0,
60℃
IEC60695-11-10 UL: E171666
and tested
with appliance
(alternative) XIAMEN
BESTPOLYMER
CO LTD
501 Thickness
min.
1.6mm, V-0,
60℃
IEC60695-11-10 UL: E303451
and tested
with appliance
Fuse holder
CHI MEI
CORPORATION
PA-764(+)
Thickness min.
1.5mm, V-0,
75℃
IEC60695-11-10 UL:
E56070
and tested
with appliance
with appliance
Varistor Lien
Shun
Technical Co.
Ltd.
10D471K -
IEC 61051-2
VDE:
40005858
and tested
with appliance
40005858
and tested
with appliance
(alternative) Xianhua
Advanced
Sensitive
Components Co.,
Ltd
FNR-10K471 -
IEC 61051-2
VDE:
40008242
and tested
with appliance
40008242
and tested
with appliance
Page 36 of 57 Report No. SH08050531-001
Appendix no. 1 Photos of the product:
TRF No: IEC/EN 60065H
TRF originator Intertek ETL SEMKO SH
Object/part No.
Manufacturer/
trademark
Type/model
Technical data
Standard
Mark(s) of
conformity
Laser pickup unit SANYO Electric
Co.,Ltd
SF-HD850G
790nm(CD)
Class 1
IEC60825-1 Tested
with
appliance
Laser diodes
TOSHIBA
CORPORATION
TOLD2000MDA CD mode:
346μW,
Class 1
IEC60825-1 Tested
with
appliance
PCB
SHENZHEN
TONGXIN
CIRCUIT
ELECTRONICS
CO LTD
TY-01
TY-11
FV0, 130℃
1.4mm min
IEC60695-11-10 UL:
E201362
and tested
with appliance
with appliance
PCB,
alternative
various various
FV-0 IEC60695-11-10
UL94
UL
Connector
MOLEX INC
35977
35979
--
IEC 60065
UL: E29179
and tested
with appliance
and tested
with appliance
Insulation sheet
under power
board
SABIC
INNOVATIVE
PLASTICS US L
L C
FR1(E)(GG) Thickness:
0.51mm
FV0, 125℃
IEC60695-11-10 UL: E61257
and tested
with appliance
with appliance
Page 37 of 57 Report No. SH08050531-001
Appendix no. 1 Photos of the product:
TRF No: IEC/EN 60065H
TRF originator Intertek ETL SEMKO SH
National differences for CHINA
(According to CB bulletin No. 112A. These differences are taken from
IEC60065:1998 and adopted to IEC 60065:2001.)
(According to CB bulletin No. 112A. These differences are taken from
IEC60065:1998 and adopted to IEC 60065:2001.)
4.2.1 first sentence replaced by:
The apparatus is connected to a supply voltage
of 0.9 times or 1.1 times of any RATED SUPPLY
VOLTAGE for which the apparatus is designed.
The apparatus is connected to a supply voltage
of 0.9 times or 1.1 times of any RATED SUPPLY
VOLTAGE for which the apparatus is designed.
Pass
5.1f） Second paragraph replaced by:
………When single rated voltage is given, it
should be marked 220 V, For a rating range, it
should cover 220 V; when multiple RATED
VOLTAGES are given, one of them must be
220V and also factory default setting should be
220 V.
………When single rated voltage is given, it
should be marked 220 V, For a rating range, it
should cover 220 V; when multiple RATED
VOLTAGES are given, one of them must be
220V and also factory default setting should be
220 V.
Pass
5.4 replaced by：
When information with regard to safety is
required according to this standard, this
information shall be given in an instruction for
installation or use and supplied with the
apparatus. This information shall be given in
simplify Chinese where the apparatus is intended
to be used.
When information with regard to safety is
required according to this standard, this
information shall be given in an instruction for
installation or use and supplied with the
apparatus. This information shall be given in
simplify Chinese where the apparatus is intended
to be used.
Pass
15.1.1 first sentence replaced by:
Plugs and appliance couplers for the connection
of the apparatus to the MAINS and socket-outlets
and interconnection couplers for providing MAINS
power to other apparatus shall comply with the
Chinese National standards, Industrial standards
or relevant IEC standards for plugs and socket-
outlets, appliance couplers or interconnection
couplers.
Plugs and appliance couplers for the connection
of the apparatus to the MAINS and socket-outlets
and interconnection couplers for providing MAINS
power to other apparatus shall comply with the
Chinese National standards, Industrial standards
or relevant IEC standards for plugs and socket-
outlets, appliance couplers or interconnection
couplers.
Pass
National differences for KOREA
(According to CB bulletin No. 112A. These differences are taken from
IEC60065:1998 and adopted to IEC 60065:2001.)
(According to CB bulletin No. 112A. These differences are taken from
IEC60065:1998 and adopted to IEC 60065:2001.)
5.101
Other marking ; Wording "____ “ or an
information regulated in IEC Publication 417
giving high voltage warning to layman shall
be marked, if an apparatus contains a part more
than 600volts.
information regulated in IEC Publication 417
giving high voltage warning to layman shall
be marked, if an apparatus contains a part more
than 600volts.
N/A
15.1.1
Plugs for the connection of the apparatus to the
supply mains and socket outlets for providing
mains power to other apparatus shall
comply with the Korean requirements (KSC8300
and 8305).
supply mains and socket outlets for providing
mains power to other apparatus shall
comply with the Korean requirements (KSC8300
and 8305).
Pass
31
Radio frequency interference
The apparatus shall comply with the relevant
CISPR requirements.(EMC = EMI + EMS)
The apparatus shall comply with the relevant
CISPR requirements.(EMC = EMI + EMS)
Pass
Page 38 of 57 Report No. SH08050531-001
Appendix no. 1 Photos of the product:
TRF No: IEC/EN 60065H
TRF originator Intertek ETL SEMKO SH
National differences for SINGAPORE
(According to CB bulletin No. 112A. These differences are taken from
IEC60065:1992 and adopted to IEC 60065:2001.)
(According to CB bulletin No. 112A. These differences are taken from
IEC60065:1992 and adopted to IEC 60065:2001.)
Throughout the standard
, whenever the words “white pine board” appear, insert
the words “or plywood board” to it.
Pass
SS 143 Amendment No.1 and No. 2
4.1.3
Delete “45 % to 75 %” and insert “65 _ 5 %”.
75% maximum in IEC
60065:2001
60065:2001
Pass
7.1
Resistance to heat without external forces
Adopt the temperature specified for the tropical
conditions.
Adopt the temperature specified for the tropical
conditions.
Pass
9.3.4
Delete the note “A Quality Assessment System
for capacitors complying with Subclause 14.2 is
under consideration in the IEC”.
for capacitors complying with Subclause 14.2 is
under consideration in the IEC”.
This is not in IEC 60065:2001.
Pass
10.2
Humidity treatment
Adopt the testing conditions designed for tropical
conditions.
Adopt the testing conditions designed for tropical
conditions.
120h at a relative humidity of
93%, ambient temperature
40
93%, ambient temperature
40
o
C
Pass
16
External flexible cords
Delete “IEC Publication 227: Polyvinyl Cloride
Insulated Cables of Rated Voltages up to and
Including 450/750 V and IEC Publication 245:
Rubber Insulated Cables of Rated Voltage up to
and including 450/750V” and insert “Singapore
Standard 236: Flexible Cords”, whenever they
appear in this clause.
Delete “CEE Publication 13, CEE Publication 2
and IEC Publication 173: Colours of the Cores of
Flexible Cables and Cords” whenever they
appear in this clause.
Delete “IEC Publication 227: Polyvinyl Cloride
Insulated Cables of Rated Voltages up to and
Including 450/750 V and IEC Publication 245:
Rubber Insulated Cables of Rated Voltage up to
and including 450/750V” and insert “Singapore
Standard 236: Flexible Cords”, whenever they
appear in this clause.
Delete “CEE Publication 13, CEE Publication 2
and IEC Publication 173: Colours of the Cores of
Flexible Cables and Cords” whenever they
appear in this clause.
Pass
16.2
Delete the notes in small print and insert “A
nominal cross-sectional area of 0.75 mm
nominal cross-sectional area of 0.75 mm
2
will
satisfy this requirement”.
Pass
16.4b
Delete “Subclause 3.1 of IEC Publication 227-2:
Part 2: Test Methods” and insert “Subclause 9.1
of SS 236”:
9.1 Flexing Test (except for tinsel cords, twisted
twin and single core cords).
The test shall be carried out by mieans of the
apparatus shown in Figure 5. This apparatus has
a carrier C supporting two pulleys A and B
arranged so that the cord is horizontal between
the pulleys. The carrier moves backward and
forward over a distance of 1 m at an
approximately constant speed of 0.33 m/s.
A sample of flexible cord fabout 5 m long shall be
stretched over the pulleys as shown in the figure,
each end being loaded with a weight. The weight
and the diameter of the pulleys A and B shall be
as given in Table 1.
Screene cords in accordance with Table 7 shall
be tested before application of the screen and
outer sheath.
Part 2: Test Methods” and insert “Subclause 9.1
of SS 236”:
9.1 Flexing Test (except for tinsel cords, twisted
twin and single core cords).
The test shall be carried out by mieans of the
apparatus shown in Figure 5. This apparatus has
a carrier C supporting two pulleys A and B
arranged so that the cord is horizontal between
the pulleys. The carrier moves backward and
forward over a distance of 1 m at an
approximately constant speed of 0.33 m/s.
A sample of flexible cord fabout 5 m long shall be
stretched over the pulleys as shown in the figure,
each end being loaded with a weight. The weight
and the diameter of the pulleys A and B shall be
as given in Table 1.
Screene cords in accordance with Table 7 shall
be tested before application of the screen and
outer sheath.
Pass
Click on the first or last page to see other HD 980 (serv.man3) service manuals if exist.