DOWNLOAD Harman Kardon DVD 39 (serv.man3) Service Manual ↓ Size: 3.08 MB | Pages: 73 in PDF or view online for FREE

Reference No. : 54120801I                                                                                                                        Page 8

 

◀  Anam EMC Test Laboratory  ▶

 

 

6. DISTURBANCE POWER 

6.1. Operating environment 

Temperature 

: 25℃ 

Relative humidity  : 55% 

 
      6.2. Test set-up and procedure 
 

The EUT was placed on a non-metallic table of 0.8m height. At the side of the 

 

EUT a non-metallic table of 6m length was placed to provide for movement of 

 

the absorbing clamp. The absorbing clamp was applied successively to all leads 

 

whose length was 25 ㎝  or longer, unscreened or screened. For the read, the 

 

maximum measured value at each frequency which was obtained when the 

 

absorbing clamp is moved along the lead was registered. No metallic object, 

 

including a possible other unit of the EUT or any person, was closer to the lead 

 

or unit than 0.8m. All screened and unscreened cables were measured with an 
absorbing clamp, according to EN55013, 5.6. 

 
   6.3. Measurement uncertainty 
 

Radio interference power:  ±2.0 ㏈ 

 

The Measurement uncertainty describes the overall uncertainty of the given   
measured value during operation of the EUT in the above-mentioned way. 

 
   6.4. Test instrumentation 

Equipment 

Manufacturer 

Type No. 

Serial No. 

Measurement 
receiver 

R & S 

ESCI 

100348 

Absorbing clamp 

R & S 

MDS 21 

860846/006 

Test DVD 

 

TDV-540 

N/A 

 

* R & S: Rohde & Schwarz 

 

6.5. Test protocols 

 

Date: January 21, 2008 

 

The equipment does comply with the requirements. 

 

Operating condition: The EUT continuously operated with audio frequency 
of 1,000 ㎐  and color bar from DVD Test DISC. 
An absorbing clamp was placed around all leads.   
At each mode, the maximum value at each testing frequency and each output 
lead was registered and attached as follows. 
 
 

Reference No. : 54120801I                                                                                                                        Page 9

 

◀  Anam EMC Test Laboratory  ▶

 

 

Limit(㏈㎺) Result(㏈㎺) 

Test Lead 

Freq. 

(㎒) 

QP AV QP  AV 

Remote IN 

135.00 

48.9 38.9 37.3  30.4 

Remote OUT 

81.00 

46.9 

36.9 

36.2 

28.5 

HDMI 81.00 

46.9 

36.9 

* 

* 

S-VIDEO 81.00 

46.9 

36.9 

* * 

COAXIAL 81.00 

46.9 

36.9 

*  * 

COMPONENT 81.00 

46.9 36.9  * 

* 

VIDEO 81.00 

46.9 

36.9 

* * 

Audio out L/R 

81.00 

46.9 

36.9 

* 

* 

Audio out FL/FR 

81.00 

46.9 

36.9 

* 

* 

Audio out SL/SR 

81.00 

46.9 

36.9 

* 

* 

Audio out C/SW 

81.00 

46.9 

36.9 

* 

* 

AC Power cord 

200.00 

51.3 41.3  * 

* 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note:1) The spectrum was checked from 30 to 300 ㎒. 

 

     2) The cable (6.0m length) loss is included in a correction factor. 

 

     3) Detector function of the measuring instrument:  

 

 

QP: Quasi-peak, AV: Average 

 

     4) QP line: Limit (㏈㎺) = Frequency (㎒)  ×0.037 + 43.9 

 

              AV line: Limit (㏈㎺) = Frequency (㎒)  ×0.037 + 33.9 

 

     5) *: Less than 25 ㏈㎺ 

 

For the measurement data, see Annex B (12 Copies). 

 
 
 
 
 
 
 
 
 
 
 
 

Reference No. : 54120801I                                                                                                                        Page 10

 

◀  Anam EMC Test Laboratory  ▶

 

 

7. HARMONICS 

     

7.1. Operating environment 

Temperature 

: 18℃ 

Relative humidity  : 50% 

 
    7.2. Test set-up and procedure 
 

Harmonics of the fundamental current were measured up to 2 ㎑ using a 

 

universal power analyzer. The measurement was carried out under steady   

 

conditions and using averaging. 

 

The Class of this equipment is “Class A” by clause 5 of EN61000-3-2 : 2000. 

 

The measurement was performed with the Test software for Windows 
The input signal and load conditions were set as given in clause 4.2.4 of   
IEC60065. 

 
   7.3. Test instrumentation 

Equipment 

Mfr. 

Type No. 

Serial No. 

Test DVD 

 

TDV-540 

N/A 

Universal power analyzer  Voltech 

PM6000 

100006700178 

Programmable controller 

Pacific 

360AMXT/UPC32 

151 

Magnetics module 

Pacific 

134310 

334 

 

7.4. Test result 

 

The equipment does comply with the requirements. 
For the measurement data, see Annex C (3 Copies). 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

Reference No. : 54120801I                                                                                                                        Page 11

 

◀  Anam EMC Test Laboratory  ▶

 

 

8. FLICKER 

   8.1. Operating environment 

Temperature 

: 18℃ 

Relative humidity  : 50% 

 
      8.2. Test set-up and procedure 
 

The open circuit test voltage was the rated voltage of the EUT. 

 

The reference impedance was a conventional impedance being used to calculate 
or measure the disturbance caused by an appliance. 

 

The measurement was performed with the Test software for Windows 
 

8.3. Test instrumentation 

Equipment 

Mfr. 

Type No. 

Serial No. 

Test DVD 

 

TDV-540 

N/A 

Reference impedance 

Voltech 

IEC Standard 555 

IB16/0725 

Universal power analyzer  Voltech 

PM6000 

100006700178 

Programmable controller 

Pacific 

360AMXT/UPC32 

151 

Magnetics module 

Pacific 

134310 

334 

 

8.4. Test result 

 

The equipment does comply with the requirements. 

 

For the measurement data, see Annex D (1 Copies).