Harman Kardon DVD 16 (serv.man3) Service Manual ▷ View online
39
Artwork number: 080-1437
ENGLISH
Technical Specifications for DVD Player
TECHNICAL SPECIFICATIONS
Applicable Disc:
Disc formats: 5 inch (12 cm) or 3 inch (8 cm) DVD Video, Standard conforming DVD+RW, DVD+R, DVD-R,
DVD-RW, DivX, CD, CD-R, MP3, JPEG or CD-RW discs,
Regio code: DVD Movie disc with Code 2 or 0 only.
DVD-Layers: Single Side/Single Layer, Single Side/Dual Layer, Dual Side/Single Layer, Dual Side/Dual Layer
Audio formats: Linear PCM, MPEG, Dolby Digital or DTS Audio discs.
Still-image format: JPEG
Video Signal System:
PAL/NTSC
HDMI™ Output:
Video: 576p, 720p, 1080i, 1080p
HDMI Version 1.3-compliant
Wow & Flutter:
Below Measurable Limits
AC Power:
100 - 240V/50 ~ 60Hz
Power Consumption:
1 Watt (Standby)/13 Watts (Max)
Dimensions (WxHxD):
440mm x 206mm x 49mm
Weight:
1.65 kg
Depth measurement includes knobs and connectors.
Height measurement includes feet and chassis.
Features, specifications and appearance are subject to change without notice.
Height measurement includes feet and chassis.
Features, specifications and appearance are subject to change without notice.
Harman Consumer, Inc.
8500 Baloba Blvd., Northridge, CA 91329 USA
© 2010 Harman International Industries, Incorporated. All rights reserved.
8500 Baloba Blvd., Northridge, CA 91329 USA
© 2010 Harman International Industries, Incorporated. All rights reserved.
Harman Kardon is a registered trademark of Harman International Industries, Incorporated, registered in the United States and/or other countries.
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are registered trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent # 5,451,942 & other U.S. and worldwide patents issued & pending. DTS and DTS-ES are registered trademarks and DTS Advanced Digital Out and the
DTS logo are trademarks of DTS, Inc.
Blu-Ray Disc is a trademark of the Blu-Ray Disc Association.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by
Rovi Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Rovi Corporation. Reverse engineering or disassembly is prohibited.
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are registered trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent # 5,451,942 & other U.S. and worldwide patents issued & pending. DTS and DTS-ES are registered trademarks and DTS Advanced Digital Out and the
DTS logo are trademarks of DTS, Inc.
Blu-Ray Disc is a trademark of the Blu-Ray Disc Association.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by
Rovi Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Rovi Corporation. Reverse engineering or disassembly is prohibited.
0220CSK - HK AVR-DVD System OM, WORK R2 01.indd 39
12/07/10 14:11:32
harman/kardon
DVD 16 and 18 /230V Service Manual
Page 17 of 39
4-1
Software check and upgrade
Preparation to upgrade software
1. Start the CD burning software;
B. Read out the software versions to confirm upgrading
2. Then copy the Bin file (
HM_EU16bin
) into it;
3. Burn the data onto the blank CD.
1. Power on the set and open the tray door.
2. Press press <7><7><7><7> button on the reomote control.
A. Procedure for software upgrade
3. Then need choose "VERSION" item, the version informations
-Upgrade software via Disc
will display as following:
1. Power on the set and insert the prepared Upgrade
SC:135: XXXXX
CDR.
F/W ID: XXXXX
2. The set will start reading and response with the
CHIP ID: XXXXX
following display on TV screen:
ERGION: X
BIN FILE: HM EU16.BIN
BIN FILE: HM_EU16.BIN
VERSION: HM_EU16 VXX
Caution: The set must not be power off during
upgrading, otherwise the Main board will be
3. Press <YES> button to confirm, then screen will
damaged entirely.
display as below, and the tray will automatically open,
then take the upgrade CD out.
4. Please wait for a moment, the tray will close and set
restarts automatically when upgrading completed.
harman/kardon
DVD 16 and 18 /230V Service Manual
Page 18 of 39
No display on VFD, and buttons do not work
No
No
No
Yes
Yes
No display on VFD, and
buttons do not work
Check every supply
voltage on main board is
normal
voltage on main board is
normal
Refer to Power supply board part
Check the main board U1’s pin 28,
29, 31 arrive the front board U301’s
pin5, 6, 8, 9 connect condition
Correct connection
Replace U301 or VFD
Yes
Yes
Yes
No
Check5V,+12V,-24V
voltage on the power
and front board
voltage on the power
and front board
Check the front board
signals CS CLK DATA
signals CS CLK DATA
1. Check whether bad solder exists
on the front board U301 and pins
of VFD
2.Check whether the circuit
connected to SW1
on the front board U301 and pins
of VFD
2.Check whether the circuit
connected to SW1
ˈ SW301 is
broken.
Fix the connection XS2 on front board
and CON2 on power board
Trouble shooting chart
5-1
harman/kardon
DVD 16 and 18 /230V Service Manual
Page 19 of 39
Remote control does not work
Go
Yes
No
Yes
Remote control
does not work
No
Replace the battery for remote
controller
Check whether the remote
controller’s battery is
exhausted or not.
Check the REM301
power supply is OK,
REM301.3 is about 5V
Check the VCC net on front board
Yes
Trouble shooting chart
5-2
Check the IR signal
output of REM301.1
Check the Signal net on front board
Yes
Replace REM301
No
harman/kardon
DVD 16 and 18 /230V Service Manual
Page 20 of 39
Click on the first or last page to see other DVD 16 (serv.man3) service manuals if exist.