DOWNLOAD Harman Kardon DVD 10 (serv.man11) Service Manual ↓ Size: 13.53 MB | Pages: 34 in PDF or view online for FREE

21

Select Subtitle Language
With this set up you define the default subtitle language (if disc was cre-
ated with different language tracks). Choosing a subtitle language from
the Banner Display (see page 9) will overwrite this setting only 
temporaily.

1. Press ARROW (UP or DOWN) on the remote to select Subtitles on the

SET UP MENU DISPLAY.

2. Press ENTER or ARROW (right), Subtitle Menu appears.

3. Press ARROW (UP or DOWN) on the remote to select specific Subtitle

Language.

4. Press ENTER.

5. Press PLAY to resume normal playback or RETURN to delete Set Up

menu display.

Select Other Language
1. Select Other and Press ENTER.

2. Input first number of language code (see table on page 32) into the

first digit by pressing ARROW (UP or DOWN) on the remote, then
ENTER or ARROW (right) and enter the other 3 digits in the same way.
The code can also be entered directly with the NUMBER (0~9) keys.

3. Select OK icon and press ENTER.

4. Press PLAY to resume normal playback or RETURN to delete Set Up

Menu display.

• If language selected is not available on disc, the language designated

by each disc as default will be selected.

Define the language of the menus and other short messages shown on
the screen.

1. Press ARROW (UP or DOWN) on the remote to select Menus on the

SET UP MENU DISPLAY.

2. Press ENTER or ARROW (right), Menus Menu appears.

3. Press ARROW (UP or DOWN) on the remote to select specific Menu

Language.

4. Press ENTER.

5. Press PLAY to resume normal playback or RETURN to delete the Set

Up Menu display.

22

This chapter is to disable the playing of some DVDs (particulary U.S.
types) which are insuitable for some audiences, for example children.
These DVDs are encoded with a specific rating level. If the rating level of
the disc is higher than the preset in the settings operations described in
this chapter, playback of the disc will be prohibited unless the password
memorized (see next page) is entered.

Set the rating level in the following way:

1. Press ARROW (UP or DOWN) on the remote to select Rating in SET UP

MENU DISPLAY.

2. Press ENTER or ARROW (right), Rating Menu as shown below appears,

when no password (see next page) is entered yet.

3. Press the ARROW (UP or DOWN) on the remote to select rating level

(lowest blue highlighted number). As indicated below rating scale, all
DVDs with a rating level within the blue number area will require
password before being played, all those with rating level within the
amber number area will have free access.

4. Press ENTER. The rating menu will disappear and rating level selected

will be indicated in the Set Up Menu.

• If any password was memorized (see next page), rating menu is avail-

able only after correct password has been entered.

The rating levels:
The rating system is based on information encoded on the DVD disc
being played, so movies may carry a rating symbol, the disc may or may
not contain that rating in its software. In addition to the five standard
(MPAA) rating symbols of ”G” (level 2), ”PG” (Parental Guidance,
level 4), ”PG13” (Parental Guidance and 13 years old, level 4), ”R”
(Restricted, level 6) and ”NC17” (from 17 years old, level 7), the DVD10
will accommodate a total of eight rating steps, as set by the DVD cre-
ators. These additional steps allow for more critical control of program
playback for all audiences.

Level 8:

All DVDs can be played (Factory preset).

Level 7 to 2: DVDs for general audiences/children can be played.

Level1:

DVDs for children can be played, DVDs for adults/general
audiences are prohibited.

Level 0:

Playback of all DVDs is prohibited (e.g. to prohibit playback
of DVDs for adults which are not encoded with rating level
information).

23

Input Password
For disabling the playback of rated DVDs a password, consisting of four
digits, must be entered:

1. Press ARROW (UP or DOWN) on the remote to select Password on the

SET UP MENU DISPLAY.

2. Press ENTER or ARROW (right), Password Menu appears.

3. Select Set Password, press ENTER (Enter Password Display appears).

4. Press the ARROW (UP or DOWN) or NUMBER (0~9) on the remote to

enter password.

5. Press ENTER to finish password input (Confirm Password display

appears below Enter Password Display).

6. Press the ARROW (UP or DOWN) or NUMBER (0~9) on the remote to

enter same password for confirmation.

7. When incorrect password is entered, new password menu appears and

you can enter and confirm the password again. This time, as help, the
correct password is repeated in each digit of the ”Try Again” menu
and the incorrect password in the lower ”Confirm Password” menu
part , appearing after the upper is passed.

8. After the correct password is entered in all menus, press ENTER, the

main password menu will return and a red key symbol appears in the
front display. To return to Set Up Menu press ARROW (left). The lock
symbol in the Set Up Menu appears closed to show that the rating is
locked.

• After password is memorized, all password menus are available only

after correct password is entered. If incorrect password is entered, new
password menu appears where the correct password can be entered
again.

• Note that the time delay before the password can be re-entered will

increase with each attempt. This prevents attempts to find the correct
password by trial and error.

• It’s most important that you note the password in a safe place or

remember it reliably as access to rated discs or rating/password menus
or changing or clearing the password (see next pages) is not possible
without entering the correct password.

24

Change Password
Password can be changed a any time but first the current password must
be entered:

1. Press ARROW (UP or DOWN) on the remote to select Password on the

SET UP MENU DISPLAY.

2. Press ENTER or ARROW (right), Enter Password Display appears.

3. Press the ARROW (UP or DOWN) or NUMBER(0~9) on the remote to

enter the actual password and press ENTER again, Password Display
appears.

4. Press ARROW (UP or DOWN) on the remote to select Change

Password and press ENTER (Enter Password Display appears again).

5. Enter new password, press ENTER (Confirm Password Display

appears).

6. Press the ARROW (UP or DOWN) or NUMBER (0~9) on the remote to

enter same password - for confirmation.

7. After new password is entered correctly in all menus, press ENTER.

The main password menu will return. To return to Set Up Menu, press
ARROW (left).