Harman Kardon DPR 2005 (serv.man3) EMC - CB Certificate ▷ View online
WOORI Technology Inc. Page 3 of 84
DPR2005 (Harman Kardon)
EMC Test Report
Reference No.: NK2EE 267.EMI
8 RADIATED
DISTURBANCE
16
8.1 Test Procedure
8.2 Measurement Uncertainty
8.3 Test Parameters
8.4 Test Data
9. ANTENNA
TERMINAL
DISTURBANCE
VOLTAGE
19
9.1 Test Procedure
9.2 Measurement Uncertainty
9.3 Test Parameters
9.4 Test Data
10. FLUCTUATING
HARMONICS
22
10.1 Test Procedure
10.2 Test Parameters
10.3 Fluctuating Harmonics, Graphic Presentation
11. FLICKER
23
11.1 Test Procedure
11.2 Test Parameters
11.3 Flicker Propability (Pst), Graphic Presentation
APPENDIXES
APPENDIX A Measurement Graphs of Mains Terminal Disturbance Voltage
24
APPENDIX B Measurement Graphs of Radio Interference Power
37
APPENDIX C Measurement Graphs of Fluctuating Harmonics
64
APPENDIX D Measurement Graphs of Flicker
67
APPENDIX E Photographs of Test
69
APPENDIX F Photographs of EUT
76
APPENDIX G Circuit Diagram
87
APPENDIX H Schematic Diagrams
88
WOORI Technology Inc. Page 4 of 84
DPR2005 (Harman Kardon)
EMC Test Report
Reference No.: NK2EE 267.EMI
1. Client Information
1.1 Applicant
1.2 Manufacturer
1.3 Factory
1.4 Other Information
●No Comment
Company Name:
WOORI Technology Inc.
Company Address:
WootiTG. Bldg., 1595-1, Bongcheon-7Dong,
Kwanak-Gu, Seoul, Korea, 151-835
Phone/Fax:
+82-2-2102-5132 / +82-2-886-8560
Contact Name:
Mr. Dae Woo,. Lee
Company Name:
WOORI Technology Inc.
Company Address:
WootiTG. Bldg., 1595-1, Bongcheon-7Dong,
Kwanak-Gu, Seoul, Korea, 151-835
Phone/Fax:
+82-2-2102-5132 / +82-2-886-8560
Contact Name:
Mr. Dae Woo,. Lee
Company Name:
Guangzhou Telefield Ltd.
Company Address:
No. 1 Industrial Area, Zhuliao, Guangzhou Baiyun Area,
Guangdong Province, P.R. China.
Phone/Fax:
+86-20-8744-0109 (ext 218)/+86-20-8744-0161
Contact Name:
Mr. Dae Young, Rho
WOORI Technology Inc. Page 5 of 84
DPR2005 (Harman Kardon)
EMC Test Report
Reference No.: NK2EE 267.EMI
2. Equipment Under Test ( EUT)
2.1 Identification of EUT
Category:
AV Receiver
Model Name:
DPR2005
Brand Name:
Harman Kardon
External Signal in/out:
Audio INOUT (24), 8CH Direct IN (8), Pre-OUT (8),
Digital Coaxial IN/OUT (4), Component Video IN/OUT (3),
S-Video IN/OUT (9), Composite Video IN/OUT (9),
Remote IN/OUT (2), Multi Room (1), RS-232 (1), A-BUS (1),
Antenna FM/AM (2), Speaker (7), Headphone (1)
Clock:
20.0 MHz (Y1), 12.288 MHz (Y2), 14.31818 MHz (Y100),
17.734 MHz (Y101), 7.2 MHz (X-Tal)
Chipsets:
CPU 100P-NEC (IC62), CS42528CQ (IC61),
LC74763 (IC33), LC72131M (IC02)
Printed Circuit Boards
(Part No.):
(Part No.):
Processor Board (PB-D04-KPOB-20)
Video Board (PB-D04-KVDI-20)
Digital Amp. Board (PB-D04-KAMB-20)
Outlet Board (PB-D04-KOUI-20)
RS232 Board (PB-D04-KOUI-20)
Front. Board (PB-D04-KFCI-20)
SMPS Power Board (KJP-10013)
Tuner Module (KST-MV114MA 0-80)
Serial Number:
N/A
Voltage:
AC 230V, 50Hz
Power:
1100 W (Max.), 200W (1/8W)
Remarks:
2.2 Variants Covered By This Report
ID No.
Model Name
Technical Deviations From Reference Model
N/A N/A
2.3 Modifications
●No modifications.
2.4 Additional Information Related To Testing
●No comment
2.5 Picture Documentation
●Pictures can be found in
Appendix F.
WOORI Technology Inc. Page 6 of 84
DPR2005 (Harman Kardon)
EMC Test Report
Reference No.: NK2EE 267.EMI
3. General Test Conditions
3.1 Location
NEMKO KOREA Co., Ltd.
300-2, Osan-Ri, Mohyun-Myun, Yongin-City, Kyungki-Do, Koera. 449-852
Phone : +82-31-322-2333 Fax : +82-31-322-2332
3.2 Operating Environment
All tests and measurements were performed in a shielded enclosure or a controlled environment
suitable for the tests conducted. The climatic conditions in the test area are automatically controlled
and recorded continuously.
Parameters Recording
during
test
Accepted deviation
Ambient temperature
20℃
15 - 35℃
Relative humidity
45%
30 - 60%
Atmospheric pressure
100kPa
86-106kPa
3.3 Operating During Test
● The receiver was set to an RF mono signal frequency modulated at 1kHz with 37.5kHz deviation
and set to Tape, DVD, Video 2, Video 4., 8CH Direct with a sinusoidal signal of 1kHz.
The interface cables shall be connected to the available interface ports of the EUT.
3.4 Test Equipment
● The test equipment used in testing are calibrated on a regular basis. For most of the testing
equipment accredited calibration is conducted once a year. For certain equipment the calibration
interval is longer. Between the calibrations all test equipment are controlled and verified on a
regular basis. The test equipments used are defined in each test section of this report.
3.5 Support Equipment
Equipment Model Manufacturer Serial
No.
VP-8174A Mitsubishi 110487b122
Signal Generator
7101 Dagatron 61101076
OS-5060A
LG Precision Co.,Ltd
71200320
Oscilloscope
SS-5710 Iwatsu 61214036
Load 8
ohm RARA
N/A
Notebook CM2080
Compaq 5Y12FP74KC49
Notebook Adapter
PA-1600-02
Lite-Elec.
Printer HP692C
HP
SG74TIC206
Printer Adapter
C2182A
NMB
230597
Keyboard SDM4500P
Samsung
PS/2 Mouse
M-S48
Logitech
LZA75395360
USB Mouse
OMS3CE
Immanual