Harman Kardon CDR 2 (serv.man18) Service Manual ▷ View online
- 9 -
7
3
6
9
10
8
5
1
4
2
7 15
14 13
1
2
12
8
11
3
10 9
6
4
5
5. PCB-1(Power) REMOVAL
6. PCB-2(I/O) REMOVAL
1. Detach the connector to in Fig.5
2. Remove screws to in Fig.5, and then remove PCB-1.
2. Remove screws to in Fig.5, and then remove PCB-1.
1. Detach the connector to in Fig.6
2. Remove screws to in Fig.6, and then remove PCB-2.
2. Remove screws to in Fig.6, and then remove PCB-2.
<Fig 5>
<Fig 6>
➊ ➍
➎
➊ ➌
➍ ➓
15
- 10 -
7. MECHA-1 (CDP) ASSEMBLY REMOVAL
8. MECHA-2 (CDR) ASSEMBLY REMOVAL
1
5
2
4
3
2
4
3
1
1. Remove screws to in Fig.7
2. Detach the connector in Fig.7, and the remove the Mecha-1.
2. Detach the connector in Fig.7, and the remove the Mecha-1.
1. Remove screws to in Fig.8
2. Remove the Mecha-2 and Cover Deck at the same time.
2. Remove the Mecha-2 and Cover Deck at the same time.
<Fig 7>
<Fig 8>
➊ ➍
➎
➊ ➍
- 11 -
9. PCB-5 (Front) REMOVAL
1. Remove screws to in Fig.9
2. Pull-out the PCB-5 from the Front Panel.
2. Pull-out the PCB-5 from the Front Panel.
10. PCB-6(Headphone) Removal.
1. Remove screws to in Fig.9
2. Pull-out the Rotate Volume in Fig.1 from the PCB-6(Headphone).
3. Remove the PCB-6 from the Front Panel.
2. Pull-out the Rotate Volume in Fig.1 from the PCB-6(Headphone).
3. Remove the PCB-6 from the Front Panel.
11. PCB-7(REC Volume) Removal.
1. Remove screws to in Fig.9
2. Pull-out the Rotate Volume in Fig.1 from the PCB-7(REC Volume).
3. Remove the PCB-7 from the Front Panel.
2. Pull-out the Rotate Volume in Fig.1 from the PCB-7(REC Volume).
3. Remove the PCB-7 from the Front Panel.
➍
➎
➋
➊
➌
➏
➐
<Fig 9>
1. unsolder the motor lead to which are connected to
PCB-3.
2. Pull-out the PCB-3 by hook-off to in Fig.10
from the MECHA-1(CDP)
3. Detach the connector to in Fig.10
4. Remove the PCB-3 from the MECHA-1(CDP).
4. Remove the PCB-3 from the MECHA-1(CDP).
12. PCB-3(CDP) REMOVAL
<Fig 10>
➊
➎
➐
➏
➋
➍
➌
➌ ➍
➊ ➋
➎ ➐
➊ ➌
➏ ➐
➏
➍ ➎
➎
- 12 -
1. Pull-out the PCB-4 by hook-off to in Fig.11
from the MECHA-2(CDR)
2. Detach the connector to in Fig.11
3. Remove the PCB-4 from the MECHA-1(CDR)
3. Remove the PCB-4 from the MECHA-1(CDR)
13. PCB-4(CDR) REMOVAL
<Fig 11>
➊
➌
➐
➏
➎
➍
➋
➊
➍ ➐
➌
Click on the first or last page to see other CDR 2 (serv.man18) service manuals if exist.