Harman Kardon AVR 7300 EMC - CB Certificate ▷ View online
-
IEC 60065, 6th edition : 1998
-
- Page 21 of 40 -
Order
No.
24775
14.3.5.1
Class II transformers have adequate
insulation between hazardous live
parts and accessible parts (double or
reinforced insulation)
insulation between hazardous live
parts and accessible parts (double or
reinforced insulation)
Double or reinforced insulation between hazardous live
windings and accessible conductive parts.
windings and accessible conductive parts.
P
Coil formers and partition walls
≥
0,4 mm
Sub transformer, type H01-TXPWMSD10A0;
The bobbin fulfils the requirement of reinforced insulation,
thickness: > 0,4 mm.
The bobbin fulfils the requirement of reinforced insulation,
thickness: > 0,4 mm.
P
14.3.5.2
Class I transformers have adequate
insulation between hazardous live
parts and accessible conductive
parts or those conductive parts or
protective screens connected to a
protective earth terminal
insulation between hazardous live
parts and accessible conductive
parts or those conductive parts or
protective screens connected to a
protective earth terminal
Windings of Class II construction used.
N
Winding wires connected to
protective earth have adequate
current-carrying capacity
protective earth have adequate
current-carrying capacity
N
14.4
High voltage components
N
High-voltage components and
assemblies: U > 4 kV (peak)
separately approved
assemblies: U > 4 kV (peak)
separately approved
No high voltage components used
N
Component meets category FV 1 of
IEC 60 707
IEC 60 707
N
14.4.1
High voltage transformers and
multipliers tested as part of the
submission
multipliers tested as part of the
submission
N
14.5 Protective
devices
P
Protective devices used within their
ratings
ratings
Thermal cut-out, thermal links and fuses
P
External clearance and creepage
distances appropriate for the voltage
across the device when opened
distances appropriate for the voltage
across the device when opened
P
14.5.1.1
a) Thermal cut-outs separately
approved
approved
Automatic (built-in main transformer) :
Manufacturer. : Seki Controls Co., Ltd.
Type :
Manufacturer. : Seki Controls Co., Ltd.
Type :
ST-22
Certified by
: VDE according to IEC60730
P
b) Thermal cut-outs tested as part of
the submission
the submission
N
14.5.1.2
a) Thermal links separately
approved
approved
a) Built-in sub transformer:
Manufacturer : Uchihashi Estec Co., Ltd.
Type :
Manufacturer : Uchihashi Estec Co., Ltd.
Type :
323
Certified by
: VDE according to IEC60691
b) Built-in reactor:
Manufacturer : Uchihashi Estec Co., Ltd.
Type :
Manufacturer : Uchihashi Estec Co., Ltd.
Type :
225R
Certified by
: VDE according to IEC60691
P
-
IEC 60065, 6th edition : 1998
-
- Page 22 of 40 -
Order
No.
24775
b) Thermal links tested as part of the
apparatus
apparatus
N
14.5.1.3
Thermal devices resettable by
soldering
soldering
No such thermal device
N
14.5.2.1
Fuse-links in the mains circuit
according to IEC 60 127
according to IEC 60 127
See list below
P
Circuit M
anufacturer
Dimen- Approved
Marking
of
Marking Current
diagram
sions
by
rated current,
close to
through
informa-
pre-arcing time
the com-
the fuse
tion
and current
ponent
in normal
Part No
characteristic
operation
F451 (pr.)
Littelfuse.
5
××××
20mm, 218
xxx
VDE
T1.6A L 250V
T1.6A L 250V
0,80 A*)
F452 (pr.)
Littelfuse.
5
××××
20mm, 215
xxx
VDE
T8A H 250V
T8A H 250V
3,51 A
F453 (sec.)
Littelfuse.
5
××××
20mm, 218
xxx
VDE
T800mA L 250V
T800mA L 250V
0,45 A
F454, F455 (sec.)
Littelfuse. 8.5
φφφφ
, 0663
VDE
T2A 250V
T2A L 250V
0,65 A
F200, F201 (sec.)
Littelfuse. 8.5
φφφφ
, 0663
VDE
T2A 250V
T2A L 250V
0,25 A
F202, F203 (sec.)
Littelfuse. 8.5
φφφφ
, 0663
VDE
T2A 250V
T2A L 250V
1,30 A
F204, F205 (sec.)
Littelfuse. 8.5
φφφφ
, 0663
VDE
T2A 250V
T2A L 250V
0,60 A
F206, F207 (sec.)
Littelfuse. 8.5
φφφφ
, 0663
VDE
T2A 250V
T2A L 250V
0,60 A
*) Calculated through current for mains socket-outlet: SWITCHD 100W + UNSWITCHD 100W (200W total).
14.5.2.2
Correct marking of fuse-links
adjacent to holder
adjacent to holder
Correct marking applied close to the fuse, see table
above.
above.
P
14.5.2.3
Not possible to connect fuses in
parallel
parallel
No fuse holder so designed that fuse-links can be
connected in parallel
connected in parallel
P
14.5.2.4
Not possible to touch hazardous live
parts when replacing fuse-links
without the use of a tool
parts when replacing fuse-links
without the use of a tool
No replacement of fuse possible by hand.
P
14.5.3
PTC-S thermistors comply with
IEC 60 738
IEC 60 738
No PTC’s
N
PTC-S devices (>15 W) category
FV 1 or better
FV 1 or better
N
14.5.4
Other protective devises.
Circuit protectors have adequate
breaking capacity and their position
is correctly marked
Circuit protectors have adequate
breaking capacity and their position
is correctly marked
No other protective devices
N
14.6 Switches
P
Manually operated mechanical
switch (MOMS) conductively
connected to the mains
switch (MOMS) conductively
connected to the mains
P
-
IEC 60065, 6th edition : 1998
-
- Page 23 of 40 -
Order
No.
24775
Part No
Function
Manufacturer
Type
Rated Marking
All-
One
Name
Trademark
V A Surge
pole
pole
current
-
x
Alps
Elect. -
SDL1P-D 250
5
80A
SK1, SK2, SK41
x
Tyco Electronic.
OEG
SDT-S-112DMR 250
8
120A
14.6.1
Permanently connected equipment
provided with an all-pole mains
switch unless 5.4.2 is met
provided with an all-pole mains
switch unless 5.4.2 is met
Apparatus is not permanently connected
N
14.6.2
Manually operated mechanical
switch (MOMS), required where
power consumption > 15 W and/or
peak voltage > 4 kV
switch (MOMS), required where
power consumption > 15 W and/or
peak voltage > 4 kV
Yes. MOMS required. See table above.
P
Switch readily accessible and not in
mains cord
mains cord
Switch located on the front and readily accessible
P
Exception for automatic switching
N
Exception for continuous operation
N
14.6.3
Manually operated mechanical
switch (MOMS): Switch indication /
On position clearly discernible
switch (MOMS): Switch indication /
On position clearly discernible
The display is illuminated.
P
Indication by marking meets Cl. 5
Yes
P
Indication of the OFF position
Off-position marked with “OFF”
P
14.6.4
Manually operated mechanical
switch (MOMS) fitted. Is there a
Stand-by mode
switch (MOMS) fitted. Is there a
Stand-by mode
Yes
P
Stand-by mode clearly discernible
LED indication
P
Exception for low Stand-by current
< 0,7 mA (peak)
< 0,7 mA (peak)
N
14.6.5
Components bridging contacts of
mains switches comply with 14.1 a)
or 14.2.2
mains switches comply with 14.1 a)
or 14.2.2
Yes. See clause 14.2.
P
14.6.6.a.
Manually operated mechanical
switches (MOMS) separately
approved to IEC 61 058-1
switches (MOMS) separately
approved to IEC 61 058-1
Yes, certified by VDE.
P
14.6.6.b.
Manually operated mechanical
switch (MOMS) tested as part of the
equipment complies with 14.6.7,
14.6.10 and 20.1.4 and meets 14.6.8
and/or 14.6.9 and Annex G (G1.1)
switch (MOMS) tested as part of the
equipment complies with 14.6.7,
14.6.10 and 20.1.4 and meets 14.6.8
and/or 14.6.9 and Annex G (G1.1)
N
Flame test for mains switches
N
14.6.7 Endurance
test
N
14.6.8
Temperature rise in mains switch
N
-
IEC 60065, 6th edition : 1998
-
- Page 24 of 40 -
Order
No.
24775
14.6.9
Dielectric strength test
N
14.6.10
Surge current for mains switches
also controlling mains socket-outlets
also controlling mains socket-outlets
Measured surge current through,
- Mains switch
- Mains switch
: LT 1A,
- Mains relay, SK1 and SK2 : 17A,
- Mains relay, SK41
- Mains relay, SK41
: 50A *.
The measured and surge current value is less than rated
surge current rating of the mains switch and relays - OK.
*) Surge current value for switched outlet, 100W = 50A.
P
14.7 Safety
interlocks
N
Safety interlocks to 2.8 of
IEC 60 950
IEC 60 950
No safety interlock
N
14.8
Voltage setting devices
N
Voltage setting device not likely to be
changed accidentally
changed accidentally
No voltage selector
N
14.9 Motors
P
14.9.1
Endurance test on motors
No motors
N
Motor start test
N
Dielectric strength test
N
14.9.2
Not adversely affected by oil or
grease etc.
grease etc.
N
14.9.3
Protection against moving parts
No moving parts
N
14.9.4
Motors with phase-shifting
capacitors, three-phase motors and
series motors meet Cl. B.8, B.9 and
B.10 of IEC 60 950, Annex B
capacitors, three-phase motors and
series motors meet Cl. B.8, B.9 and
B.10 of IEC 60 950, Annex B
N
14.10 Batteries
N
14.10.1
Batteries mounted with no risk of
accumulation of flammable gases
accumulation of flammable gases
No batteries
N
14.10.2
No possibility of recharging non-
rechargeable batteries
rechargeable batteries
N
14.10.3
Recharging currents and times
within manufacturers limits
within manufacturers limits
N
Lithium batteries discharge and
reverse currents within the
manufacturers limits
reverse currents within the
manufacturers limits
N
14.11 Optocouplers
N
Optocouplers comply with Cl. 8
No optocouplers.
N
Internal and external dimensions to
13.1.1
13.1.1
N
Click on the first or last page to see other AVR 7300 service manuals if exist.