DOWNLOAD Harman Kardon AVR 7000 (serv.man7) Service Manual ↓ Size: 1.2 MB | Pages: 52 in PDF or view online for FREE

PROGRAMMING THE REMOTE  41

• If a macro is to turn on the AVR 7000, it should
be programmed on the SAT Device Selector
# (macro 2) only. Macro 1 should be selected
only if the AVR is turned on already, otherwise
pressing the AVR Device Selector

1 would

turn on the AVR immediately rather than selecting
the macro associated with the AVR Selector
1 (macro 1).

• Due to the limitations mentioned above we 
recommend to program Macro 2 for turning all
units on and engaging other functions and Macro
1 to turn all devices off only.

To remove a macro program, follow steps 1, 2
and 4 above, but ignore step three. For example,
to erase macro 1, press the AVR Device
Selector

1 and the Mute button 5 at the

same time until the red light under the Device
Control Selector turns on. Press the Power
button 

3 and then press the Sleep button

". The red light under the Device Control
Selector

1 will blink twice to confirm the data

entry and then turn off.

The AVR 7000’s remote may be programmed to
operate the Volume Control

! and the Mute

5 from either the TV or the AVR in conjunction
with any of the six devices controlled by the
remote. For example, since the AVR 7000 will like-
ly be used as the sound system for TV viewing,
you may wish to have the AVR’s volume activated
although the remote is set to run the TV.

To program the remote for Volume Punch-
Through, follow these steps:

1. Press the Input or Video Device Selector
2# for the unit you wish to have associated
with the volume control and the Mute button 

5

at the same time until the red light illuminates
under the Device Selector.

2. Press the Volume Up button 

!.

3. Press either the AVR

1 or the TV Device

#, depending on which sys-

tem’s volume control you wish to have attached
for the punch-through mode. Note that the red
light under the Device Control Selector

#

will blink twice and then go out to confirm the
data entry.

Example: To have the AVR’s volume control acti-
vated even though the remote is set to control
the TV, first press the TV Device Control
Selector

# and the Mute button 5 at the

same time. Next, press the Volume Up button
!, followed by the AVR Device Control
Selector

1.

NOTE: Should you wish to return the remote to
the original configuration after entering a Volume
Punch-Through, you will need to repeat the steps
shown above. However, press the same Device
Control Selector in steps one and three.

Although any of the Input or Video Device
Selectors

2# is normally assigned to the

category of product shown on the remote, it is
possible to reassign one of these buttons to oper-
ate a second device of another type. For example,
if you have two VCRs but no cable box receiver,
you may program the AUX button 

# to operate

a second VCR. Before following the normal pro-
gramming steps for either Three-Digit entry or
Auto Search code entry, you must first reassign the
button with the following steps:

1. Press the Input or Video Device Selector
2# you wish to reassign and the Mute
button 

5 at the same time until the red light

illuminates under the Device Control Selector
#.

2. Press the Input or Video Device Selector
2# for the function you wish to program into
the reassigned button.

3. Enter the three-digit code for the specific
model you wish the reassigned button to oper-
ate.

4. Press the same Input or Video Device
Selector

2# pressed in Step 1 once again to

store the selection.

Example: To use the AUX button to operate a
second VCR, first press the AUX Device Control
Selector

# and the Mute button 5 at the

same time until the red light glows under the AUX
button. Press the VCR button 

#, followed by

the three-digit code for the specific model you
wish to control. Finally, press the AUX button 

#

again.

42 FUNCTION LIST

25

28

31

32

29

26

1

5

6

7

8

9

12

14

10

11

13

15

2

3

4

21

34

33

30

27

35

38

37

36

39

40

41

42

43

44

45

46

47

48

49

50

55

54

51

52

53

56

AVR 7000

22

23

24

16

17

18

20

19

57

⁄

¤

⁄

¤

⁄

¤

fi

fl

Î

fi

fifi

‡fi

Í

fl

flfl

fl·

FUNCTION LIST  43

⁄

¤

⁄

¤

⁄

¤

fi

fl

Î

fi

fifi

‡fi

Í

fl

flfl

fl·

44 SETUP CODES

ADCOM

062

AIWA

089

170

187

AKAI

202

CARVER

167

041

135

138

139

050

203

DENON

205

226

HARMAN KARDON

047

033

208

001

002

JVC

022

136

163

KENWOOD

007

016

023

055

137

MARANTZ

107

044

MONDIAL

147

NAD

005

178

215

NAKAMICHI

218

ONKYO

030

038

062

168

169

OPTIMUS

049

085

PANASONIC

068

PIONEER

010

020

174

PHILIPS

041

REALISTIC

102

181

187

RCA

012

150

SHARP

051

173

SHERWOOD

096

166

SONY

097

126

133

225

TEAC

079

140

TECHNICS

068

172

YAMAHA

012

046

183

186

DENON

014

HARMAN KARDON

018

JVC

012

LG

010

MAGNAVOX

013

MITSUBISHI

002

ONKYO

017

PANASONIC

003

PHILIPS

013

PIONEER

004

PROSCAN

005

006

RCA

005

006

SAMSUNG

011

015

SONY

007

TOSHIBA

008

YAMAHA

009

ZENITH

010

016

DAeWOO

024

DENON

030

GOLDSTAR

027

KENWOOD

025

MAGNAVOX

026

OPTIMUS

032

PANASONIC

021

PHILIPS

026

PIONEER

020

034

RCA

031

REALISTIC

032

SAMSUNG

023

029

SHARP

025

028

SONY

022

TECHNICS

021

TOSHIBA

025

YAMAHA

033

PIONEER

001

BR-200

AMERICAST

005

JERROLD

006

RT-J22 (CFT2200)

JERROLD

007

RT-J550C

PIONEER

002

BR-95

PIONEER

003

RT-P81/82

SCIENTIFIC-ATLANTIC

004

RT-S6X/USV86

TOCOM

010

RT-T7/T8

ZENITH

008

MN2500

ZENITH

009

RT-ZPMV