DOWNLOAD Harman Kardon AVR 5000 (serv.man13) Service Manual ↓ Size: 1.16 MB | Pages: 58 in PDF or view online for FREE

A
B
C
D
E
F
G
H
I
J
K

L
M
N
O
P
Q
R
S
T
U
V

W
X
Y
Z
AA 
AB
AC
AD
AE

FRONT PANEL INFORMATION DISPLAY

A

B

D E

N

O

K

M

L

T

U

SR

Q

P

Z

Y

X W V

F

H I J

O

O

O

O

O

O

O

O

C

G

AE

AD

AC

AB

AA

Bitstream Indicators
Optical Source Indicators
DTS Mode Indicator
Dolby Digital Indicator
Coaxial Source Indicators
Dolby Pro Logic Indicator
Analog Input Indicator
Dolby 3 Stereo Indicator
VMAx Mode Indicator
5 Channel Stereo Indicator
Logic 7 Mode Indicators

Hall Mode Indicator
OSD Indicator
Theater Mode Indicator
Night Mode Indicator
Multiroom Indicator
Speaker/Channel Input Indicators
Preset Number/Sleep Timer
Preset Indicator
Sleep Indicator
Memory Indicator
Stereo Indicator

Tuned Indicator
Auto Indicator

Main Information Display
Mute Indicator

Traffic Indicator

Radiotext Indicator
Clock Timer Indicator
Program Type Indicator
RDS Indicator

A

Bitstream™ Indicators: When the input is a

digital source, one of these indicators will light to
display the specific type of signal in use.

B

Optical Source Indicators: These indica-

tors light to show when a Optical Digital Input
has been selected.

C

DTS Mode Indicator: This indicator illumi-

nates when the DTS mode is selected.

D

Dolby Digital Indicator: This indicator illu-

minates when Dolby Digital mode is selected.

E

Coaxial Source Indicators: These indica-

tors light to show when a Coaxial Digital Input
has been selected.

F

Dolby Pro Logic Indicator: This indicator

lights when the Dolby ProLogic mode has been
selected.

G

Analog Input Indicator: This indicator

lights when an analog input source has been
selected.

H

Dolby 3 Stereo Indicator: This indicator

lights when the Dolby 3 Stereo Mode has been
selected.

I

VMAx Mode Indicator: This indicator illu-

minates to show that the VMAx mode is in use.
V M A x F

appears when the Far Field VMAx

mode is selected; V M A x N appears when the
Near Field VMAx mode is selected. (See page 28
for a description of the VMAx Modes.)

J

5 Channel Stereo Indicator: This indica-

tor lights when the 5 Channel Stereo mode has
been selected.

K

Logic 7 Mode Indicators: These indicators

illuminate when the Logic 7 mode is in use.
LOGIC 7 C

appears for the Cinema version

of Logic 7, LOGIC 7 M appears for the
Music version of Logic 7. (See page 28 for a
description of the Logic 7 Modes.)

L

Hall Mode Indicators: These indicators

light when one of the Hall modes has been
selected.

M

OSD Indicator: When the OSD system is in

use, this indicator lights to remind you that the
other indicators in this display do not function
when the On Screen Display is being used.

N

Theater Mode Indicator: This indicator illu-

minates to show that the Theater mode is in use.

O

Night Mode Indicator: This indicator

lights when the AVR5000 is in the Night mode,
which preserves the dynamic range of digital
program material at low volume levels.

P

Multiroom Indicator: This indicator lights

when the multiroom system is active. Note that
it will remain lit when the multiroom system is in
use even though the main room system is in the
Standby mode and all other indicators are dark.
(See page 38 for more information on the
Multiroom system.)

Q

Speaker/Channel Input Indicators: These

indicators are multipurpose, indicating either the
speaker type selected for each channel or the
incoming data-signal configuration. The left, cen-
ter, right, right surround and left surround speaker
indicators are composed of three boxes, while the
subwoofer is a single box. The center box lights
when a “Small” speaker is selected, and the two
outer boxes light when “Large” speakers are
selected. When none of the boxes are lit for the
center, surround or subwoofer channels, no
speaker has been selected for that position. (See
page 22 for more information on configuring
speakers.) The letters inside each of the center
boxes display active input channels. For standard
analog inputs, only the L and R will light, indicat-
ing a stereo input. When a digital source is play-
ing, the indicators will light to display the chan-
nels begin received at the digital input. When the
letters flash, the digital input has been interrupt-
ed. (See page 31 for more information on the
Channel Indicators).

R

Preset Number/Sleep Timer: When the

tuner is in use, these numbers indicate the spe-
cific preset memory location in use. (See page 33
for more information on preset stations.) When
the Sleep function is in use, these numbers show
how many minutes remain before the unit goes
into the Standby mode.

8 FRONT PANEL INFORMATION DISPLAY

S

Preset Indicator: This indicator lights when

the tuner is in use to show that the Preset
Number/Sleep Timer R is showing the sta-
tion’s preset memory number. (See page 33 for
more information on tuner presets.)

T

Sleep Indicator: This indicator lights when

the Sleep function is in use. The numbers in the
Preset/Sleep Number Indicators will show the
minutes remaining before the AVR5000 goes
into the Standby mode. (See page 27 for more
information on the Sleep function.)

U

Memory Indicator: This indicator flashes

when entering presets and other information
into the tuner’s memory.

V

Stereo Indicator: This indicator illuminates

when an FM station is being tuned in stereo.

W

Tuned Indicator: This indicator illuminates

when a station is being received with sufficient sig-
nal strength to provide acceptable listening quality.

X

Auto Indicator: This indicator illuminates

when the tuner’s Auto mode is in use.

Y

Main Information Display: This display

shows messages relating to the status, input
source, surround mode, tuner, volume level or
other aspects of unit’s operation.

Z

Mute Indicator: This indicator illuminates

to remind you that the AVR5000’s output has
been silenced by pressing the Mute button
˚

. Press the Mute button again to return

to the previously selected output level.

AA

This indicator illuminates if the RDS station
tuned somtimes transmits traffic information
(see page 34 for more information on RDS).

AB

RT Text Indicator: This indicator illumi-

nates when the RDS station tuned is transmit-
ting radiotext (RT) data.

AC

Clock Time Indicator: This indicator illu-

minates when the RDS station tuned is transmit-
ting the CT (clock time) code, indicating the cur-
rent time of day.

AD

PTY Indicator: This indicator illuminates

when the RDS station tuned is transmitting pro-
gram type data, or during a PTY search.

AE

RDS Indicator: This indicator illuminates

when the station tuned is transmitting RDS data.

REAR PANEL CONNECTIONS

b

 

                  HDCD

®

, High Definitioni Compatible Digital and Pacific Microsonics™ are

either registered trademarks or trademarks of Pacific Microsonics, Inc. In the United
States and/or other countries. HDCD system manufactured under license from Pacific
Microsonics, Inc. This product is covered by one or more of the following: in the USA:
5,479,168,  5,638,074,  5,640,161,  5,808,574,  5,838,274,  5,854,600,  5,864,311,
5,872,531, and in Australia: 669114. Other patents pending.

!

"

230V/50 Hz

#

$

AC OUTLETS

~230V/50Hz

UNSWITCHED / 100W MAX

SWITCHED / 50W MAX

 

%

$

#

"

!

Tape Inputs
Tape Outputs
Video 1 Audio Inputs
AM Antenna
Video 1 Audio Outputs
DVD Audio Inputs
FM Antenna
CD Inputs
6-Channel Direct Inputs
Multiroom Outputs
Preamp Outputs
Subwoofer Output
Video Monitor Outputs
Amplifier Inputs

Speaker Outputs
Switched AC Accessory Outlet
Unswitched AC Accessory Outlet
AC Power Cord
Remote IR Output
Remote IR Input
Multiroom IR Input
DVD Video Inputs
Video 1 Video Outputs
Video 3 Video Inputs
Video 2 Video Inputs
Video 2 Video Outputs
Video 1 Video Inputs
Optical Digital Inputs

Coaxial Digital Inputs
Digital Audio Outputs
Video 3 Audio Inputs
Video 2 Audio Inputs
Video 2 Audio Outputs
Component Video Outputs
Video 2 Component Video Inputs
DVD Component Video Inputs

 Tape Inputs: Connect these jacks to the
PLAY/OUT jacks of an audio recorder.

 Tape Outputs: Connect these jacks to the
RECORD/INPUT jacks of an audio recorder.

 Video 1 Audio Inputs: Connect these jacks
to the PLAY/OUT audio jacks on a VCR or other
video source.

 AM Antenna: Connect the AM loop antenna
supplied with the receiver to these terminals. If an
external AM antenna is used, make connections to
the AM and GND terminals in accordance with
the instructions supplied with the antenna.

 Video 1 Audio Outputs: Connect these
jacks to the RECORD/INPUT audio jacks on 
a VCR or any other Audio recorder.

 DVD Audio Inputs: Connect these jacks to
the analog audio jacks on a DVD or other video
source.

 FM Antenna: Connect the supplied indoor or
an optional external FM antenna to this terminal.

 CD Inputs: Connect these jacks to the ana-
log output of a compact disc player or CD
changer.

 6-Channel Direct Inputs: If an external
digital audio decoder is used, connect the out-
puts of that decoder to these jacks.

 Multiroom Outputs: Connect these jacks
to an optional audio power amplifier to listen to
the source selected by the multiroom system in a
remote room.

 Preamp Outputs: These jacks may be con-
nected to an external power amplifier.

 Subwoofer Output: Connect this jack to
the line-level input of a powered subwoofer. If
an external subwoofer amplifier is used, connect
this jack to the subwoofer amplifier input.

10 REAR PANEL CONNECTIONS

  Video Monitor Outputs: Connect these
jacks to the composite and/or S-Video input of a
TV monitor or video projector to view the on-
screen menus and the output of any video source
selected by the receiver’s video switcher.

 Amplifier Inputs: When the jumper pins
that link the Preamp Outputs

 with these

inputs are removed, these jacks may be used to
connect any external 5.1 channel source (or 2
channel source, if only Main Inputs are used),
e.g. processors, to the internal amplifiers. (See
page 18 for more information on using these
connections.)

 Speaker Outputs: Connect these outputs
to the matching + or – terminals on your speak-
ers. When making speaker connections always
make certain to maintain correct polarity by con-
necting the red (+) terminals on the AVR5000 to
the red (+) terminals on the speakers and the
black (–) terminals on the AVR5000 to the black
(–) terminals on the speakers. See page 15 for
more information on speaker polarity.

 Switched AC Accessory Outlet: This out-
let may be used to power any device that you
wish to have turn on when the unit is turned on
with the System Power Control switch 2.

 Unswitched AC Accessory Outlet: This
outlet may be used to power any AC device. The
power will remain on at this outlet regardless of
whether the AVR5000 is on or off (in Standby),
provided that the Main Power switch 1 is on.

Note: The total power consumption of all
devices connected to the accessory outlets
should not exceed 100 watts from the
Unswitched Outlet

 and 50 W from the

.

 AC Power Cord: Connect the AC plug to an
unswitched AC wall output.

 Remote IR Output: This connection per-
mits the IR sensor in the receiver to serve other
remote controlled devices. Connect this jack to
the “IR IN” jack on Harman Kardon or other
compatible equipment.

 Remote IR Input: If the AVR5000’s front-
panel IR sensor is blocked due to cabinet doors
or other obstructions, an external IR sensor
may be used. Connect the output of the sensor
to this jack.

% Multiroom IR Input: Connect the output of
an IR sensor in a remote room to this jack to
operate the AVR5000’s multiroom control system.

 DVD Video Inputs: Connect these jacks to
the composite or S-Video output jacks on a DVD
player or other video source.

 Video 1 Video Outputs: Connect these
jacks to the RECORD/INPUT composite or 
S-Video jack on a VCR.

 Video 3 Video Inputs: Connect these jacks
to the PLAY/OUT composite or S-Video jacks on
any video source.

 Video 2 Video Inputs: Connect these jacks
to the PLAY/OUT composite or S-Video jacks on
a second VCR or other video source.

 Video 2 Video Outputs: Connect these
jacks to the RECORD/INPUT composite or 
S-Video jacks on a second VCR.

 Video 1 Video Inputs: Connect these jacks
to the PLAY/OUT composite or S-Video jacks on
a VCR or other video source.

 Optical Digital Inputs: Connect the optical
digital output from a DVD player, HDTV receiver,
LD player, MD player or CD player to these jacks.
The signal may be either a Dolby Digital signal, a
DTS signal or a standard PCM digital source.

 Coaxial Digital Inputs: Connect the coax
digital output from a DVD player, HDTV receiver,
LD player, MD player or CD player to these jacks.
The signal may be either a Dolby Digital signal,
DTS signal or a standard PCM digital source. Do
not connect the RF digital output of an LD play-
er to these jacks.

$ Digital Audio Outputs: Connect these
jacks to the matching digital input connector on
a digital recorder such as a CD-R or MiniDisc
recorder.

# Video 3 Audio Inputs: Connect these jacks
to the PLAY/OUT audio jacks on any audio or
video source.

" Video 2 Audio Inputs: Connect these jacks
to the PLAY/OUT audio jacks on a VCR or other
video source.

! Video 2 Audio Outputs: Connect these
jacks to the RECORD/INPUT audio jacks on a
VCR or any Audio recorder.

Note: Either the Video or S-Video output of any
S-Video source must be connected to the
AVR5000, not both in parallel, otherwise the
video may be disturbed or its performance be
adversely effected.

 Component Monitor Outputs: Connect
these outputs to the component video inputs of
a video projector or monitor. When a source
connected to one of the two Component
Video Inputs

 is selected the signal will

be sent to these jacks.

 Video 2 Component Video Inputs:
Connect the Y/Pr/Pb component video outputs of
a set top converter box or other video source to
these jacks.

 DVD Component Video Inputs: Connect
the Y/Pr/Pb component video outputs of a DVD
player to these jacks.

Note: All component inputs/outputs can be
used for RGB signals too, in the same way as
described for the Y/Pr/Pb signals, then connected
to the jacks with the corresponding color.
RGB connection is not possible if the source
outputs a separate sync signal.