DOWNLOAD Harman Kardon AVR 5000 (serv.man13) Service Manual ↓ Size: 1.16 MB | Pages: 58 in PDF or view online for FREE

Model
AVR 5000 (serv.man13)
Pages
58
Size
1.16 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Audio
File
avr-5000-sm13.pdf
Date

Harman Kardon AVR 5000 (serv.man13) User Manual / Operation Manual ▷ View online

REAR PANEL CONNECTIONS
9
Rear Panel Connections
b
 
                  HDCD
®
, High Definitioni Compatible Digital and Pacific Microsonics™ are
either registered trademarks or trademarks of Pacific Microsonics, Inc. In the United
States and/or other countries. HDCD system manufactured under license from Pacific
Microsonics, Inc. This product is covered by one or more of the following: in the USA:
5,479,168,  5,638,074,  5,640,161,  5,808,574,  5,838,274,  5,854,600,  5,864,311,
5,872,531, and in Australia: 669114. Other patents pending.
!
"
230V/50 Hz
#
$
AC OUTLETS
~230V/50Hz
UNSWITCHED / 100W MAX
SWITCHED / 50W MAX
 
%
$
#
"
!
Tape Inputs
Tape Outputs
Video 1 Audio Inputs
AM Antenna
Video 1 Audio Outputs
DVD Audio Inputs
FM Antenna
CD Inputs
6-Channel Direct Inputs
Multiroom Outputs
Preamp Outputs
Subwoofer Output
Video Monitor Outputs
Amplifier Inputs
Speaker Outputs
Switched AC Accessory Outlet
Unswitched AC Accessory Outlet
AC Power Cord
Remote IR Output
Remote IR Input
Multiroom IR Input
DVD Video Inputs
Video 1 Video Outputs
Video 3 Video Inputs
Video 2 Video Inputs
Video 2 Video Outputs
Video 1 Video Inputs
Optical Digital Inputs
Coaxial Digital Inputs
Digital Audio Outputs
Video 3 Audio Inputs
Video 2 Audio Inputs
Video 2 Audio Outputs
Component Video Outputs
Video 2 Component Video Inputs
DVD Component Video Inputs
 Tape Inputs: Connect these jacks to the
PLAY/OUT jacks of an audio recorder.
 Tape Outputs: Connect these jacks to the
RECORD/INPUT jacks of an audio recorder.
 Video 1 Audio Inputs: Connect these jacks
to the PLAY/OUT audio jacks on a VCR or other
video source.
 AM Antenna: Connect the AM loop antenna
supplied with the receiver to these terminals. If an
external AM antenna is used, make connections to
the AM and GND terminals in accordance with
the instructions supplied with the antenna.
 Video 1 Audio Outputs: Connect these
jacks to the RECORD/INPUT audio jacks on 
a VCR or any other Audio recorder.
 DVD Audio Inputs: Connect these jacks to
the analog audio jacks on a DVD or other video
source.
 FM Antenna: Connect the supplied indoor or
an optional external FM antenna to this terminal.
 CD Inputs: Connect these jacks to the ana-
log output of a compact disc player or CD
changer.
 6-Channel Direct Inputs: If an external
digital audio decoder is used, connect the out-
puts of that decoder to these jacks.
 Multiroom Outputs: Connect these jacks
to an optional audio power amplifier to listen to
the source selected by the multiroom system in a
remote room.
 Preamp Outputs: These jacks may be con-
nected to an external power amplifier.
 Subwoofer Output: Connect this jack to
the line-level input of a powered subwoofer. If
an external subwoofer amplifier is used, connect
this jack to the subwoofer amplifier input.
10 REAR PANEL CONNECTIONS
Rear Panel Connections
  Video Monitor Outputs: Connect these
jacks to the composite and/or S-Video input of a
TV monitor or video projector to view the on-
screen menus and the output of any video source
selected by the receiver’s video switcher.
 Amplifier Inputs: When the jumper pins
that link the Preamp Outputs
 with these
inputs are removed, these jacks may be used to
connect any external 5.1 channel source (or 2
channel source, if only Main Inputs are used),
e.g. processors, to the internal amplifiers. (See
page 18 for more information on using these
connections.)
 Speaker Outputs: Connect these outputs
to the matching + or – terminals on your speak-
ers. When making speaker connections always
make certain to maintain correct polarity by con-
necting the red (+) terminals on the AVR5000 to
the red (+) terminals on the speakers and the
black (–) terminals on the AVR5000 to the black
(–) terminals on the speakers. See page 15 for
more information on speaker polarity.
 Switched AC Accessory Outlet: This out-
let may be used to power any device that you
wish to have turn on when the unit is turned on
with the System Power Control switch 2.
 Unswitched AC Accessory Outlet: This
outlet may be used to power any AC device. The
power will remain on at this outlet regardless of
whether the AVR5000 is on or off (in Standby),
provided that the Main Power switch 1 is on.
Note: The total power consumption of all
devices connected to the accessory outlets
should not exceed 100 watts from the
Unswitched Outlet
 and 50 W from the
Switched Outlet
.
 AC Power Cord: Connect the AC plug to an
unswitched AC wall output.
 Remote IR Output: This connection per-
mits the IR sensor in the receiver to serve other
remote controlled devices. Connect this jack to
the “IR IN” jack on Harman Kardon or other
compatible equipment.
 Remote IR Input: If the AVR5000’s front-
panel IR sensor is blocked due to cabinet doors
or other obstructions, an external IR sensor
may be used. Connect the output of the sensor
to this jack.
Multiroom IR Input: Connect the output of
an IR sensor in a remote room to this jack to
operate the AVR5000’s multiroom control system.
 DVD Video Inputs: Connect these jacks to
the composite or S-Video output jacks on a DVD
player or other video source.
 Video 1 Video Outputs: Connect these
jacks to the RECORD/INPUT composite or 
S-Video jack on a VCR.
 Video 3 Video Inputs: Connect these jacks
to the PLAY/OUT composite or S-Video jacks on
any video source.
 Video 2 Video Inputs: Connect these jacks
to the PLAY/OUT composite or S-Video jacks on
a second VCR or other video source.
 Video 2 Video Outputs: Connect these
jacks to the RECORD/INPUT composite or 
S-Video jacks on a second VCR.
 Video 1 Video Inputs: Connect these jacks
to the PLAY/OUT composite or S-Video jacks on
a VCR or other video source.
 Optical Digital Inputs: Connect the optical
digital output from a DVD player, HDTV receiver,
LD player, MD player or CD player to these jacks.
The signal may be either a Dolby Digital signal, a
DTS signal or a standard PCM digital source.
 Coaxial Digital Inputs: Connect the coax
digital output from a DVD player, HDTV receiver,
LD player, MD player or CD player to these jacks.
The signal may be either a Dolby Digital signal,
DTS signal or a standard PCM digital source. Do
not connect the RF digital output of an LD play-
er to these jacks.
Digital Audio Outputs: Connect these
jacks to the matching digital input connector on
a digital recorder such as a CD-R or MiniDisc
recorder.
Video 3 Audio Inputs: Connect these jacks
to the PLAY/OUT audio jacks on any audio or
video source.
Video 2 Audio Inputs: Connect these jacks
to the PLAY/OUT audio jacks on a VCR or other
video source.
Video 2 Audio Outputs: Connect these
jacks to the RECORD/INPUT audio jacks on a
VCR or any Audio recorder.
Note: Either the Video or S-Video output of any
S-Video source must be connected to the
AVR5000, not both in parallel, otherwise the
video may be disturbed or its performance be
adversely effected.
 Component Monitor Outputs: Connect
these outputs to the component video inputs of
a video projector or monitor. When a source
connected to one of the two Component
Video Inputs
 is selected the signal will
be sent to these jacks.
 Video 2 Component Video Inputs:
Connect the Y/Pr/Pb component video outputs of
a set top converter box or other video source to
these jacks.
 DVD Component Video Inputs: Connect
the Y/Pr/Pb component video outputs of a DVD
player to these jacks.
Note: All component inputs/outputs can be
used for RGB signals too, in the same way as
described for the Y/Pr/Pb signals, then connected
to the jacks with the corresponding color.
RGB connection is not possible if the source
outputs a separate sync signal.
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
 
!
"
#
$
%
&
'
(
)
MAIN REMOTE CONTROL FUNCTIONS
11
Main Remote Control Functions
Power On Button
IR Transmitter Window
Program/SPL Indicator
Power Off Button
Input Selectors
AVR Selector
AM/FM Tuner Select
Learn Button
Test Button
Sleep Button
Surround Mode Selector
Night Mode
Channel Select Button
/
¤
Buttons
Button
Set Button
Digital Select
Numeric Keys
Tuner Mode
Direct Button
Tuning Up/Down
OSD Button
Macro Buttons
Transport Controls
Skip Up/Down Buttons
RDS Select Button
Preset Up/Down
Clear Button
Memory Button
Delay/Prev. Ch.
Button
Speaker Select
Multiroom
Volume Up/Down
TV/Video Selector
SPL Indicator Select
6-Channel Direct Input
Mute
EzSet Sensor Microphone
Light Button
NOTE: The function names shown here are each
button’s feature when used with the AVR. Most
buttons have additional functions when used
with other devices. See page 44-45 for a list of
these functions.
POWER
AVR
AM/FM
V C R
6 CH.
OFF
ON
SLEEP
SURR.
M-ROOM
PR
CH
.
D
IG
ITA
L
ME
NU
SP
KR
NO
RM
AL
DE
LA
Y
SET
TUN-M
MEM
RDS
OSD
DIRECT
TUNING
PRESET
CLEAR
DWN
UP
TEST
NIGHT
  5000
SKIP
a
b
c
d
e
f
g
h
i
j
k
l
m
n
p
o
q
n
s
r
t
u
v
w
`
32
30
29
DVD
CD
TAPE
VID 2
T V
CBL/SAT
VID 4
VID 1
VID 3
SPL
LEARN
1
2
3
4
7
6
5
9
0
8
M2
M3
M4
M1
28
VOL.
37
36
35
34
33
31
38
z
x
y
39
TM
40
LIGHT
12 MAIN REMOTE CONTROL FUNCTIONS
Main Remote Control Functions
IMPORTANT NOTE: The AVR5000’s remote may
be programmed to control up to seven devices,
including the AVR5000. Before using the remote,
it is important to remember to press the Input
Selector 
button 
4 that corresponds to the
unit you wish to operate. In addition, the
AVR5000’s remote is shipped from the factory to
operate the AVR5000 and most Harman Kardon
CD or DVD players and cassette decks. The
remote is also capable of operating a wide vari-
ety of other products using the control codes that
are part of the remote or by learning commands
from other remotes. Before using the remote with
other products, follow the instructions on pages
39 to program the proper codes for the products
in your system.
It is also important to remember that many of the
buttons on the remote take on different func-
tions, depending on the product selected using
the Input Selectors. The descriptions shown here
primarily detail the functions of the remote when
it is used to operate the AVR5000. (See page 44
for information about alternate functions for the
remote’s buttons.)
Power On Button: Press this button to
turn on the power to a device selected by pressing
one of the Input Selectors
4 (except Tape).
IR Transmitter Window: Point this window
towards the AVR5000 when pressing buttons on
the remote to make certain that infrared com-
mands are properly received.
Program/SPL Indicator: This three-color
indicator is used to guide you through the
process of programming the remote or learning
commands from a remote into the AVR 5000’s
remote code memory and it is also used as a
level indicator when using the remote’s EzSet
capabilities. (See page 24 for more information
on setting output levels, and see page 39 for
information on programming the remote.)
Power Off Button: Press this button to
place the AVR5000 or a selected device unit in
the Standby mode. Note that when the AVR5000
is switched off this will turn off the main room
functions, but if the Multiroom system is activat-
ed, it will continue to function.
Input Selectors: Pressing one of these
buttons will perform three actions at the same
time. First, if the AVR is not turned on, this will
power up the unit. Next, it will select the source
shown on the button as the input to the AVR.
Finally, it will change the remote control so that
it controls the device selected. After pressing one
of these buttons you must press the AVR
Selector 
button
5 again to operate the
AVR’s functions with the remote.
AVR Selector: Pressing this button will
switch the remote so that it will operate the AVR’s
functions. If the AVR is in the Standby mode, it will
also turn the AVR on.
AM/FM Tuner Select: Press this button to
select the AVR’s tuner as the listening choice.
Pressing this button when the tuner is in use will
select between the AM and FM bands.
Learn Button: Press this button to begin
the process of “learning” the codes from another
product’s remote into the AVR5000’s remote. (See
page 40 for more information on using the
remote’s learning function.)
Test Tone: Press this button to begin the
sequence used to calibrate the AVR5000’s output
levels. (See page 24 for more information on 
calibrating the AVR5000.)
Sleep Button: Press this button to place
the unit in the Sleep mode. After the time shown
in the display, the AVR5000 will automatically
go into the Standby mode. Each press of the
button changes the time until turn-off in the fol-
lowing order:
Hold the button pressed for two seconds to turn
off the Sleep mode setting.
Note that this button is also used to change
channels on your TV, VCR and SAT receiver when
selected.
Surround Mode Selector: Press this but-
ton to begin the process of changing the sur-
round mode. After the button has been pressed,
use the 
/
¤
buttons 
D to select the desired
surround mode (See page 29 for more informa-
tion). Note that this button is also used to tune
channels when the TV, VCR and SAT receiver is
selected using the Input Selector
4.
Night Mode: Press this button to activate
the Night mode. This mode is available only with
Dolby Digital encoded digital sources, and it pre-
serves dialog (center channel) intelligibilty at low
volume levels (See page 31 for more informa-
tion).
Channel Select Button: This button is
used to start the process of setting the
AVR5000’s output levels with an external
source. Once this button is pressed, use the
/
¤
buttons 
D to select the channel being
adjusted, then press the Set button 
F, fol-
lowed by the 
/
¤
buttons again, to change the
level setting. (See page 32 for more informa-
tion.)
D
/
¤
Buttons: These are multi-purpose
buttons. They will be used most frequently to
select a surround mode. To change the surround
mode, first press the SURR/CH 
¤
button
A.
Next press these buttons to scroll up or down
through the list of surround modes that appear
in the Main Information Display Û. These
buttons are also used to increase or decrease
output levels when configuring the unit with
either the internal test tone or an external
source. They are also used to enter delay time
settings after the Delay button
  has been
pressed.
When the AVR5000 remote is being programmed
for the codes of another device, these buttons are
also used in the “Auto Search” process (See page
39 for more information on programming the
remote.)
E
Button: This button is used to change
the menu selection or setting during some of the
setup procedures for the AVR.
Set Button: This button is used to enter
settings into the AVR5000’s memory. It is also
used in the setup procedures for delay time,
speaker configuration and channel output level
adjustment.
Digital Select: Press this button to assign
one of the digital inputs 
#% to a
source. (See page 30 for more information on
using digital inputs.)
Numeric Keys: These buttons serve as a
ten-button numeric keypad to enter tuner preset
positions. They are also used to select channel
numbers when TVVCR or Sat receiver has
been selected on the remote, or to select track
numbers on a CD, DVD or LD player, depending
on how the remote has been programmed.
Tuner Mode: Press this button when the
tuner is in use to select between automatic tun-
ing and manual tuning. When the button is
pressed so that the AUTO indicator X goes
out, pressing the Tuning buttons 
K8≠
will move the frequency up or down in single-
step increments. When the FM band is in use
and the AUTO indicator X is on, pressing this
button will change to monaural reception mak-
ing even week stations audible. (See page 33 for
more information.)
90
min
80
min
70
min
60
min
50
min
40
min
30
min
20
min
10
min
OFF
Page of 58
Display

Click on the first or last page to see other AVR 5000 (serv.man13) service manuals if exist.