DOWNLOAD Harman Kardon AVR 435 (serv.man5) Service Manual ↓ Size: 9.65 MB | Pages: 127 in PDF or view online for FREE

Model
AVR 435 (serv.man5)
Pages
127
Size
9.65 MB
Type
PDF
Document
EMC - CB Certificate
Brand
Device
Audio
File
avr-435-sm5.pdf
Date

Harman Kardon AVR 435 (serv.man5) EMC - CB Certificate ▷ View online

 
EMC Test Report 
Reference No.: NK2FE 131.EMI 
WOORI Technology Inc.                                                Page 4 of 85 
                               AVR435/230 (Harman Kardon)
 
 
1. Client Information 
 
1.1 Applicant  
 
 
 
Company Name:
 
WOORI Technology Inc. 
Company Address:
 
12F, Byuksan Digitalvaiiey III, Guro-Dong, Guro-Gu
 
Guro-Gu, Seoul, Korea, 152-848 
Phone/Fax:
 
+82-2-2102-5315 / +82-2-2102-5319 
Contact Name:
 
Mr. Yoon Sup, Um 
1.2 Manufacturer
 
 
 
 
 
 
Company Name:
 
WOORI Technology Inc. 
Company Address:
 
12F, Byuksan Digitalvaiiey III, Guro-Dong, Guro-Gu
 
Guro-Gu, Seoul, Korea, 152-848 
Phone/Fax:
 
+82-2-2102-5315 / +82-2-2102-5319 
Contact Name:
 
Mr. Yoon Sup, Um 
1.3 Factory
 
 
 
 
 
 
 
Company Name:
 
Guangzhou Telefield Ltd. 
Company Address:
 
No. 1 Industrial Area, Zhuliao, Guangzhou Baiyun Area, 
 
Guangdong Province, P.R. China. 
Phone/Fax:
 
+86-20-8744-0109 (ext 218)/+86-20-8744-0161 
Contact Name:
 
Mr. Dae Young, Rho 
1.4 Other Information 
 
        ●No Comment 
 
 
 
 
 
 
 
EMC Test Report 
Reference No.: NK2FE 131.EMI 
WOORI Technology Inc.                                                Page 5 of 85 
                               AVR435/230 (Harman Kardon)
 
 
2. Equipment Under Test ( EUT) 
 
2.1 Identification of EUT
 
       
Category:
 
AV Receiver 
Model Name:
 
AVR435/230 
Brand Name:
 
Harman Kardon 
External Signal in/out: 
Audio INOUT (22), 8CH Direct IN (8), Pre-OUT (8), 
 
Digital Coaxial IN/OUT (4), Component Video IN/OUT (3), 
 
S-Video IN/OUT (8), Composite Video IN/OUT (8), Remote Car. OUT (1), 
 
Remote IN/OUT (2), Multi Room (1), RS-232 (1), A-BUS (1), 
 
Antenna FM/AM (2), Speaker (7), Microphone (1), Headphone (1) 
Clock: 
14.318 MHz (Y700), 17.734 MHz (Y701), 14.318 MHz (Y702), 
 
20.0 MHz (Y500), 24.576 MHz (Y600), 7.2 MHz (X-Tal) 
Chipsets: 
LC74763 (IC22), TVP5146PFP (IC83), uPD70F3033B (IC501), 
 
CS42518 (IC606), LC72131M (IC02) 
Main Board 
PB-D11-KMAI-20 
Woori TG 
Processor Board 
PB-D11-KPOB-20 
Woori TG 
DSP Board 
PB-D11-KDGB-20 
Woori TG 
Video Board 
PB-D11-KVDI-20 
Woori TG 
Supply Board 
PB-D11-KSUI-20 
Woori TG 
Surround Amp. Board 
PB-D11-KSRI-20 
Woori TG 
Front Board 
PB-D11-KFCI-20 
Woori TG 
Printed Circuit Boards 
(Part No.): 
Tuner Module 
KST-MB114MW 0-81 
Kwangsung 
Serial Number:
 
N/A
 
Voltage:
 
AC 230V, 50Hz
 
Power:
 
970 W (Max.), 430W (1/8W) 
Remarks:
 
 
 
2.2 Variants Covered By This Report
 
     
 
ID No. 
Model Name 
Technical Deviations From Reference Model 
N/A N/A 
 
 
2.3 Modifications
 
●1 turn Ferrite Core was added on power cable. 
   
2.4 Additional Information Related To Testing 
●No comment 
   
2.5 Picture Documentation 
      ●Pictures can be found in 
Appendix F.
 
 
EMC Test Report 
Reference No.: NK2FE 131.EMI 
WOORI Technology Inc.                                                Page 6 of 85 
                               AVR435/230 (Harman Kardon)
 
 
3. General Test Conditions 
 
3.1 Location 
 
NEMKO KOREA Co., Ltd. 
        300-2, Osan-Ri, Mohyun-Myun, Yongin-City, Kyungki-Do, Koera. 449-852 
    Phone : +82-31-322-2333           Fax : +82-31-322-2332 
 
3.2 Operating Environment 
       
      All tests and measurements were performed in a shielded enclosure or a controlled environment 
      suitable for the tests conducted. The climatic conditions in the test area are automatically controlled   
   and recorded continuously. 
 
Parameters Recording 
during 
test 
Accepted deviation 
Ambient temperature 
20℃
 
15 - 35℃ 
Relative humidity 
40% 
30 - 60% 
Atmospheric pressure 
100kPa 
86-106kPa 
 
3.3 Operating During Test 
 
●  The receiver was set to an RF mono signal frequency modulated at 1kHz with 37.5kHz deviation 
      and set to Tape, DVD, Video 2, Video 4., 8CH Direct with a sinusoidal signal of 1kHz. 
  The interface cables shall be connected to the available interface ports of the EUT. 
 
3.4 Test Equipment 
       
● The test equipment used in testing are calibrated on a regular basis. For most of the testing     
equipment accredited calibration is conducted once a year. For certain equipment the calibration     
interval is longer. Between the calibrations all test equipment are controlled and verified on a     
regular basis. The test equipments used are defined in each test section of this report. 
 
3.5 Support Equipment 
 
Equipment Model  Manufacturer  Serial 
No. 
VP-8174A Mitsubishi  110487b122 
Signal Generator 
7101 Dagatron 61101076 
OS-5060A 
LG Precision Co.,Ltd 
71200320 
Oscilloscope 
SS-5710 Iwatsu  61214036 
Load 8 
ohm  RARA 
N/A 
Notebook CM2080 
Compaq  5Y12FP74KC49 
Notebook Adapter 
PA-1600-02 
Lite-Elec. 
D3FE005162 
Printer Stylus 
C-80 
Epson 
SG74TIC206 
Printer Adapter 
C2182A 
NMB 
230597 
Keyboard SDM4500P 
Samsung 
 
PS/2 Mouse 
M-S48 
Logitech 
LZA75395360 
USB Mouse 
OMS3CE 
Immanual 
 
 
 
EMC Test Report 
Reference No.: NK2FE 131.EMI 
WOORI Technology Inc.                                                Page 7 of 85 
                               AVR435/230 (Harman Kardon)
 
 
 
3.6 Interface Cable 
         
Connection of EUT 
Cable Data 
Power Cord 
Non Shield 2.0m Cord (EMI Ferrite Core 1Turn Insert Type)   
RCA Jack 
RCA Cable, Shield 1.5m 
Speakers Non 
Shield 
1.0m 
S-Video Shield 
2.0m 
Headphone Shield 
2.0m 
A-BUS Non 
Shield 
2.0m 
Remote Shield 
2.0m 
RS-232C Shield 
2.0m 
 
 
 
 
 
 
4. Evaluation of Performance 
 
4.1 Measurement Uncertainty 
 
    Measurement uncertainty is calibrated in accordance with : 
        ●EMCIT document 93/30 
        ●NAMAS Information Sheet NIS81,Ed.1 May 1994 
(The treatment of uncertainties in EMC measurement). 
        The measurement uncertainty is not considered when deciding PASS or FAIL against the limit lines. 
        This means that “shared risk” (according to NAMAS publication NIS81 4.2) is used as option Criterion. 
        The argument for using this method, is that it is commonly accepted that the EMC limits have already 
        have already taken common good laboratory practice. 
 
4.2 Final Decision 
       
      The equipment under test complies to all requirements of the applied test standards.     
     
Page of 127
Display

Click on the first or last page to see other AVR 435 (serv.man5) service manuals if exist.