Harman Kardon AVR 370 (serv.man8) Service Manual ▷ View online
20
AVR
Making Connections
Connect Your Analog Audio Devices
use the Avr’s analog audio connectors for source devices that don’t have hdmI or digital
use the Avr’s analog audio connectors for source devices that don’t have hdmI or digital
audio connectors.
NOTE: If you’re installing a multizone system, make analog audio
connections for any source devices you want to be able to listen to in Zone 2. only analog
sources are available in Zone 2.
Stereo Audio cable
(not supplied)
to Stereo Analog
Audio output
Analog Source device
receiver Analog
Audio connectors
Connect Your Audio Recorders
connect an analog audio recorder’s inputs to the Avr’s analog audio rec out connectors.
connect an analog audio recorder’s inputs to the Avr’s analog audio rec out connectors.
you can record any analog audio input signal.
Stereo Audio cable
(not supplied)
to Stereo Analog
record Inputs
Analog recording device
Avr Analog Audio
recorder connectors
Connect Your Video Recorder
connect an analog video recorder’s video input connector to the Avr’s composite monitor
connect an analog video recorder’s video input connector to the Avr’s composite monitor
out connector. you can record any composite video signal. to record the audio from
the source device, connect the Avr’s Analog rec out connectors to the analog video
recorder’s audio inputs.
NOTE: If you have connected the Avr’s composite monitor out
video connector to your tv you cannot connect a vcr to the Avr for recording.
Analog Audio/video
cable (not supplied)
to Analog
Audio/video
record Inputs
Analog video recording device
Avr Analog
Audio recorder
connectors
Avr Analog
video recorder
connectors
USB and iOS Devices
use the Avr’s front-panel uSb port to connect an ipod, iphone or ipad using an Apple
cable (not supplied) or to directly connect a uSb memory stick. you can play audio files
from the device or memory stick and use the Avr’s remote to control playback.
Avr
front-panel
uSb port
uSb
memory
Stick
Apple cable
(not supplied)
21
English
AVR
Making Connections
Connect to Your Home Network
use a cat. 5 or cat. 5e cable (not supplied) to connect the Avr’s network connector to
your home network to enjoy Internet radio and content from dlnA-compatible devices
that are connected to the network.
Avr
network
connector
network
modem
cat. 5/5e ethernet cable
(not supplied)
to home
network
and Internet
AVR 3700/AVR 370 only:
If your home network is wi-fi
If your home network is wi-fi
®
, attach the supplied wi-fi antenna to the Avr. you do not
need to make a wired network connection.
Connect the Radio Antennas
• connect the supplied fm antenna to the Avr’s fm 75Ω antenna connector. for the
best reception, extend the fm antenna as far as possible.
• bend and fold the base of the supplied Am antenna as shown and connect the
antenna wires to the Avr’s Am and gnd connectors. (you can connect either wire to
either connector.) rotate the antenna as necessary to minimize background noise.
Avr
Antenna
connectors
fm Antenna (supplied)
Am Antenna
(supplied)
bend and fold base
Install a Multizone System
IMPORTANT SAFETY NOTE: Installing a multizone system typically requires
running cables inside walls. Always comply with the appropriate safety codes
when installing concealed wiring, particularly all applicable building codes.
Failure to do so may present a safety hazard. If you have any doubt about
your ability to work with electrical wiring, hire a licensed electrician or custom
installer to install the multizone system.
NOTE: only the following analog audio sources are available to Zone 2: the internal radio,
an ipod/iphone device or a uSb memory device inserted in the Avr’s uSb port and up
to two source devices connected to the rear-panel Analog Audio In 1 and 2 connectors.
your Avr offers two different methods of distributing audio to other areas in your home.
your Avr offers two different methods of distributing audio to other areas in your home.
each requires different connections:
A. Connect the Zone 2 speakers directly to the Assigned Amp Speaker Output
A. Connect the Zone 2 speakers directly to the Assigned Amp Speaker Output
connectors. Assign the Assigned Amp channels to power the Zone 2 speakers (see
Manual Speaker Setup, on page 36). this method allows you to power a single pair of
speakers for Zone 2.
this method offers the benefit of reduced cost and complexity, but your home theater
this method offers the benefit of reduced cost and complexity, but your home theater
system will be limited to 5.1 channels – the Avr will automatically downmix the playback
of programs recorded in 6.1 or 7.1 channels to 5.1 channels.
Zone 2
Speakers
Assigned
Amp
Speaker
connectors
Zone 2
Main Room
5.1-channel
home theater
Speaker System
fl
Sl
Sr
fr
lfe
c
Avr
Speaker wire
(not supplied)
Speaker wire
(not supplied)
22
AVR
Making Connections
B. Connect an external amplifier to the AVR’s Zone 2 Out connectors. this method
offers the benefit of retaining a 7.1-channel home theater in the main room simultaneously
with multizone operation, although it does require an additional amplifier for Zone 2.
we recommend that you place the Zone 2 amplifier in the same room as the Avr so that
we recommend that you place the Zone 2 amplifier in the same room as the Avr so that
you can use a short length of stereo audio cable along with a long run of speaker wire to
the remote room. A long run of stereo audio cable would increase the chance of signal
degradation. depending on your Zone 2 amplifier you can distribute the audio signal to a
single pair of speakers or to several pairs placed in different rooms.
Zone 2
Speakers
Stereo Audio cable
(not supplied)
7.1-channel
home theater
Speaker System
Zone 2 Amplifier
(not supplied)
fl
Sl
Sr
fr
lfe
Sbl
Sbr
c
Avr
Speaker wire
(not supplied)
Speaker wire
(not supplied)
Zone 2
Main Room
Connect IR Equipment
the Avr is equipped with remote Ir Input and output connectors and a Zone 2 Ir Input
connector that let you remotely control the Avr in a variety of situations:
• when you place the Avr inside a cabinet or facing away from the listener, connect
an external Ir receiver, such as the optional harman kardon he 1000, to the Avr’s
Ir In jack.
Avr
Ir In Jack
external Ir
receiver
Avr and Source devices
Installed Inside of cabinet
• If any source devices are equipped with a compatible Ir input, use a 1/8-inch
(3.5mm) mini-plug interconnect cable (not included) to connect the Avr’s Ir out jack
to the source device’s Ir input.
external Ir receiver
Avr
Source devices w/remote In/out Jacks
mono 1/8-inch
(3.5mm) mini-plug
Interconnect
(not supplied)
mono 1/8-inch
(3.5mm) mini-plug
Interconnect
(not supplied)
23
English
AVR
Making Connections,
to control more than one source device through the Avr’s Ir remote out connector,
connect all sources in “daisy chain” fashion, connecting each device’s Ir output to the
next device’s Ir input, starting with the Avr.
• If you install a multizone system, connect an Ir control device to the Zone 2 Ir In
connector for remote-room control of the multizone system, source devices and
volume in the remote zone.
external Ir receiver
Zone 2
Main Room
Zone 2 Speakers
Avr
If a source device is shared with the main listening area, any control commands issued
to that source will also affect the main room.
Connect the Trigger Output
If your system has equipment that can be controlled by a dc trigger signal, connect it to
the Avr’s trigger out connector with a mono 1/8-inch (3.5mm) mini-plug interconnect
cable. the Avr will supply a 12v dc (100mA) trigger signal at this connection whenever
it is powered on.
Avr
device with
trigger In connector
mono 1/8-inch
(3.5mm) mini-plug
Interconnect
(not supplied)
Connect to AC Power
connect the supplied Ac power cord to the Avr’s Ac Input connector and then to a
working Ac power outlet.
Ac power
outlet
Avr
Ac Input
connector
power cord (supplied)
Click on the first or last page to see other AVR 370 (serv.man8) service manuals if exist.