DOWNLOAD Harman Kardon AVR 100 (serv.man9) Service Manual ↓ Size: 13.32 MB | Pages: 106 in PDF or view online for FREE

Model
AVR 100 (serv.man9)
Pages
106
Size
13.32 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
avr-100-sm9.pdf
Date
PREV: Harman Kardon AVR 100 (serv.man8) Service Manual / Technical Bulletin

Harman Kardon AVR 100 (serv.man9) Service Manual ▷ View online

 [6] VIDEO 3 P.C.BOARD(b) REMOVAL.
   1. Remove the Chassis-top(35), referring to the previous step[1].
   2. Remove the Front-panel ASS'y(AA), referring to the previous step[2].
   3. Disconnect the lead wire(CW 403,6P) from connector(CN 501) on the Input P.C.Board
      (m).
   4. Remove 2 screws(J) and then remove the Video 3 P.C.Board(b).
   5. Pull out the Shield-video(8).
[7] TONE P.C.BOARD(c) REMOVAL.
   1. Remove the Chassis-top(35), referring to the previous step[1].
   2. Remove the Front-panel ASS'y(AA), referring to the previous step[2].
   3. Disconnect the lead wire(CN 710,10P) from connector(CN 803) on the Pre out P.C.
      Board(l).
   4. Pull out the Balance-knob(5).
   5. Remove 4 screws(J) and then remove the Tone P.C.Board ASS'y(AC).
   6. Remove 4 hexagon nut(2) and then remove the Shield-balance(9).
[8] PHONES P.C.BOARD(e) REMOVAL.
   1. Remove the Chassis-top(35), referring to the previous step[1].
   2. Remove the Front-panel ASS'y(AA), referring to the previous step[2].
   3. Disconnect the lead wire(CN 709,5P) from connector(CN 1) on the Amp P.C.Board(i).
   4. Disconnect the lead wire(CN 708,6P) from connector(CN 35) on the Main P.C.Board
      (j).
   5. Remove 2 screws(E) and then remove the Phones P.C.Board(e).
[9] POWER P.C.BOARD(f) REMOVAL.
   1. Remove the Chassis-top(35), referring to the previous step[1].
   2. Remove the Front-panel ASS'y(AA), referring to the previous step[2].
   3. Disconnect the lead wire(CN 705,5P) from connector(CN 404) on the Front P.C.Board
      (h).
   4. Remove 2 screws(J) and then remove the Power P.C.Board(f).
[10] STANDBY P.C.BOARD(g) REMOVAL.
   1. Remove the Chassis-top(35), referring to the previous step[1].
   2. Remove the Front-panel ASS'y(AA), referring to the previous step[2].
   3. Remove 2 screws(J) and then remove the Standby P.C.Board(g).
[11] TUNER P.C.BOARD(k) REMOVAL.
   1. Remove the Chassis-top(35), referring to the previous step[1].
   2. Remove 1 screw(I) of Chassis-bottom and then Shield-tuner(41).
   3. Remove 28 screws(G,K) and then remove the Chassis-back(32).
   4. Pull out the Tuner P.C.Board(k).
[12] PRE OUT P.C.BOARD(l) REMOVAL.
   1. Remove the Chassis-top(35), referring to the previous step[1].
   2. Remove 1 screw(I) and then pull out the Bracket-pcb(22).
   3. Disconnect the lead wire(CW 801,5P) from connector(CW 201) on the Amp P.C.Board
      (i).
   4. Disconnect the connector(CN 803) from lead wire(CN 710,10P) on the Tone P.C.Board
      (c).
   5. Disconnect the connector(CN 804) from lead wire(2P) on the Input P.C.Board(m).
   6. Remove 28 screws(G,K) and then remove the Chassis-back(32).
   7. Pull out the Pre out P.C.Board(l).
 AVR100/AVR200
34
[13] INPUT & PROLOGIC P.C.BOARD(m) REMOVAL.
   1. Remove the Chassis-top(35), referring to the previous step[1].
   2. Remove 1 screw(I) and then pull out the Bracket-pcb(22).
   3. Disconnect the lead wire(2P) from connector(CN 804) on the Pre out P.C.Board(l).
   4. Disconnect the connector(CN 501) from lead wire(CW 403,6P) on the Video 3 P.C.
      Board(b).
   5. Remove 28 screws(G,K) and then remove the Chassis-back(32).
   6. Pull out the Input & Prologic P.C.Board(m).
[14] VIDEO P.C.BOARD(n) REMOVAL.
   1. Remove the Chassis-top(35), referring to the previous step[1].
   2. Remove 28 screws(G,K) and then remove the Chassis-back(32).
   3. Pull out the Video P.C.Board(n).
[15] AC 3 P.C.BOARD(p) REMOVAL.
   1. Remove the Chassis-top(35), referring to the previous step[1].
   2. Disconnect the connector(J 1004) from lead wire(3P) on the Amp P.C.Board(i).
   3. Disconnect the connector(J 1005) from lead wire(CW 405,2P) on the Front P.C.Board
      (h).
   4. Remove 28 screws(G,K) and then remove the Chassis-back(32).
   5. Pull out the AC 3 P.C.Board(p).
[16] AC P.C.BOARD(o) REMOVAL.
   1. Remove the Chassis-top(35), referring to the previous step[1].
   2. Disconnect the connector(power switch) from connector(CN 103,2P) on the Standby
      P.C.Board(g).
   3. Disconnect the connector(CN 704) from lead wire(2P) on the Power trans(29).
   4. Disconnect the connector(ac cord,2P) from Ac cord(37).
   5. Remove 28 screws(G,K) and then remove the Chassis-back(32).
   6. Remove 3 screws(C,D) and then pull out the AC P.C.Board(o).
[17] RADIATOR ASS'y(AB) REMOVAL.
   1. Remove the Chassis-top(35), referring to the previous step[1].
   2. Remove 1 screw(I) and then remove the Bracket-pcb(22).
   3. Disconnect the lead wire(posistor,2P) from connector(CN 19) on the Main P.C.Board
      (j).
   4. Disconnect the connector(CN 1) from lead wire(CN 709,5P) on the Phones P.C.Board
      (e).
   5. Disconnect the connector(CW 201) from lead wire(CW 801,5P) on the Pre out P.C.
      Board(l).
   6. Remove 7 screws(I) and then pull out the Radiator Ass'y(AB).
[18] AMP P.C.BOARD(i) REMOVAL.
   1. Remove the Chassis-top(35), referring th the previous step[1].
   2. Remove the Radiator Ass'y(AB), referring to the Previous step[18].
   3. Remove 5 screws(I) and then remove the Amp P.C.Board(i).
[19] POWER TRANS(29) REMOVAL.
   1. Remove the Chassis-top(35), referring to the previous step[1].
   2. Disconnect the lead wire(2P) from connector(CN 704) on the AC P.C.Board(o).
   3. Disconnect the lead wire(3P) from connector(CN 15) on the Main P.C.Board(j).
   4. Disconnect the lead wire(6P) from connector(CN 16) on the Main P.C.Board(j).
   5. Disconnect the lead wire(3P) from connector(CN 17) on the Main P.C.Board(j).
   6. Remove 4 screws(B) and then remove the Power trans(29).
 AVR100/AVR200
35
 [20] MAIN P.C.BOARD(j) REMOVAL.
   1. Remove the Chassis-top(35), referring to the previous step[1].
   2. Remove the Tuner P.C.Board(k), referring to the previous step[11].
   3. Remove the Pre out P.C.Board(l), referring to the previous step[12].
   4. Remove the Input & Prologic P.C.Board(m), referring to the previous[13].
   5. Remove the Video P.C.Board(n), referring to the previous[14].
   6. Remove the AC 3 P.C.Board(p), referring to the previous[15].
   7. Remove the AC P.C.Board(o), referring to the previous[16].
   8. Disconnect the lead wire(3P) from connector(J 1003,2P) on the AC 3 P.C.Board(p).
   9. Disconnect the lead wire(3P) from connector(L/V PIN-01,1P) on the Main P.C.Board
      (j).
  10. Disconnect the lead wire(CW 2,6P) from connector(CN 34) on the Main P.C.Board(j).
  11. Disconnect the lead wire(CW 1,8P) from connector(CN 21) on the Main P.C.Board(j).
  12. Disconnect the connector(CN 35) from lead wire(CN 708,6P) on the Phones P.C.Board
      (e).
  13. Disconnect the connector(CN 20) from lead wire(CW 401,9P) on the Front P.C.Board
      (h).
  14. Disconnect the connector(CN 22) from connector(CN 401,card cable) on the Front P.
      C.Board(h).
  15. Disconnect the connector(L/V PIN-01,1P) from lead wire(3P) on the Amp P.C.Board
      (i).
  16. Disconnect the connector(CN 34) from lead wire(CW 2,6P) on the Amp P.C.Board(i).
  17. Disconnect the connector(CN 21) from lead wire(CW 1,8P) on the Amp P.C.Board(i).
  18. Disconnect the connector(CN 19) from lead wire(posistor,2P) on the Amp P.C.Board
      (i).
  19. Disconnect the connector(CN 15) from lead wire(3P) on the Power-trans(29).
  20. Disconnect the connector(CN 16) from lead wire(6P) on the Power-trans(29).
  21. Disconnect the connector(CN 17) from lead wire(3P) on the Power-trans(29).
 AVR100/AVR200
36
Page of 106
Display

Click on the first or last page to see other AVR 100 (serv.man9) service manuals if exist.

RANDOM: