Sony SLV-SE610A / SLV-SE610B / SLV-SE610E / SLV-SE610G / SLV-SE610K / SLV-SE610N / SLV-SE710B / SLV-SE710D / SLV-SE710E / SLV-SE710G / SLV-SE710I / SLV-SE710K / SLV-SE710N / SLV-SE810B / SLV-SE810D / SLV-SE810E / SLV-SE810G / SLV-SE810K / SLV-SE810N / SLV-SX71 Service Manual ▷ View online
1-15
60
Recording TV programmes using the timer
To stop recording
To stop the VCR while recording, press
x STOP.
Daily/weekly recording
In step 2 above, press
m to select the recording pattern. Each time you press
m, the indication changes as shown below. Press M to change the indication
in reverse order.
in reverse order.
TODAY
t SUN-SAT (Sunday to Saturday) t MON-SAT (Monday to
Saturday)
t MON-FRI (Monday to Friday) t SAT (every Saturday) .....
t MON (every Monday) t SUN (every Sunday) t 1 month later t
(dates count down)
(dates count down)
t TOMORROW t TODAY
2
Set the date, start and stop times,
programme position or station
name*, tape speed, and VPS/PDC
function*:
programme position or station
name*, tape speed, and VPS/PDC
function*:
1 Press
, to highlight each item in
turn.
2 Press
M/m to set each item.
To correct a setting, press
< to return to that setting and reset.
• To record the same programme every day or the same day every
week, see “Daily/weekly recording” on page 60.
• To use the VPS/PDC function*, set VPS/PDC to ON. For details
about the VPS/PDC function, see “Timer recording with VPS/
PDC signals” on page 57.
PDC signals” on page 57.
• To record from a decoder or other source connected to one or
more of the LINE inputs, press INPUT SELECT to display the
connected line in the “PROG.” position.
connected line in the “PROG.” position.
3
Press MENU to exit the menu.
4
Press
?/1 to turn off the VCR.
The
indicator appears in the display window and the VCR stands
by for recording.
To record from a decoder or other source, leave the connected
equipment switched on.
equipment switched on.
OK
PLAY
INPUT SELECT
DATE
CANCEL
SET
:
:
SELECT :
CLEAR
MENU
EXIT
:
TIMER
SP / LP
LIST
TIME
PROG.
TODAY
5
1 9 : 0 0
2 0 : 0 0
3
SP
VPS / PDC
OFF
FRI
2 8 . 9
MENU
61
Recording TV programmes using the timer
B
a
sic
O
p
O
p
er
ati
ons
ons
To record satellite broadcasts
If you connect a satellite tuner and the VCR, you can record satellite
programmes.
programmes.
To use the VCR after setting the timer
To use the VCR before a recording begins, just press
?/1. The indicator
turns off and the VCR switches on. Remember to press
?/1 to reset the VCR
to recording standby after using the VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter (page 44).
• Display tape information on the TV screen (page 47).
• Check the timer settings (page 68).
• Watch another TV programme (page 47).
• Display tape information on the TV screen (page 47).
• Check the timer settings (page 68).
• Watch another TV programme (page 47).
Tips
• To set the programme position, you can also use the PROG +/– or programme
• To set the programme position, you can also use the PROG +/– or programme
number buttons.
• To set the programme position with a two digit number, press
- (ten’s digit)
button followed by the programme number buttons.
• To set the line input video source, you can also use the PROG +/– buttons.
• To set the tape speed, you can also use the SP/LP button.
• When you are recording a programme in the SP mode and the remaining tape
• To set the tape speed, you can also use the SP/LP button.
• When you are recording a programme in the SP mode and the remaining tape
becomes shorter than the recording time, the tape speed is automatically changed
to the LP mode. Note that some interference will appear on the picture at the point
the tape speed is changed. If you want to keep the same tape speed, set AUTO
LONG PLAY to OFF in the OPTIONS-1 menu (page 85).
to the LP mode. Note that some interference will appear on the picture at the point
the tape speed is changed. If you want to keep the same tape speed, set AUTO
LONG PLAY to OFF in the OPTIONS-1 menu (page 85).
• Even if you set TIMER OPTIONS* to SHOWVIEW in the OPTIONS-2 menu, you
can set the timer manually. Press MENU to select TIMER, then go to step 2.
• To check, change, or cancel the programme setting, press
</, to choose LIST,
then press OK in step 2. For details, see step 3 in “Checking/changing/cancelling
timer settings” (page 68).
timer settings” (page 68).
1
Turn on the satellite tuner.
2
On the satellite tuner, select the satellite programme for which you want
to make a timer setting.
to make a timer setting.
3
Follow steps 1 through 4 above.
4
Keep the satellite tuner turned on until the VCR finishes recording the
satellite programme for which you have made a timer setting.
satellite programme for which you have made a timer setting.
continued
62
Recording TV programmes using the timer
Notes
• When setting the timer with VPS/PDC signals, enter the start and stop times
• When setting the timer with VPS/PDC signals, enter the start and stop times
exactly as indicated in the TV programme guide. Otherwise, the VPS/PDC
function* won’t work.
function* won’t work.
• If the VPS/PDC signal is too weak or the broadcasting station failed to transmit
VPS/PDC signals, the VCR will start recording at the set time without using the
VPS/PDC function*.
VPS/PDC function*.
• The
indicator flashes in the display window when you press
?/1 with no tape
inserted.
• The VPS/PDC function* is automatically set to OFF for the timer recording of a
satellite programme.
• The station name* may not appear if the VCR does not receive station name
information signals.
* not available on SLV-SE610N/K
63
Playing/searching at various speeds
Ad
d
d
itiona
l O
p
p
e
ra
tions
Additional Operations
Playing/searching at various speeds
Before you start
…
• Refer to “Index to parts and controls” for button locations.
To resume normal playback
Press
H PLAY.
Using the shuttle ring
(SLV-SE810N/K only)
(SLV-SE810N/K only)
With the shuttle ring, you can
operate a variety of playback
options. There are two ways for
using the shuttle ring, normal
mode and jog mode.
operate a variety of playback
options. There are two ways for
using the shuttle ring, normal
mode and jog mode.
Playback options
Operation
View the picture during
fast-forward or rewind
fast-forward or rewind
During fast-forward, hold down
M FF/M. During rewind,
hold down
m REW/m.
Play at high speed
• During playback, press
M FF or m REW on the remote
commander.
• During playback, hold down
M FF/M or m REW/m.
When you release the button, normal playback resumes.
Play at twice the normal
speed
speed
During playback, press ×2.
Play in slow motion
During playback, press
y SLOW.
Play frame by frame
During pause, press
M FF or m REW on the remote
commander. Hold down
M FF or m REW to play one
frame each second.
Rewind and start play
During stop, press
H (play) on the VCR while holding down
m on the VCR.
Shuttle ring
JOG
continued
1-16
64
Playing/searching at various speeds
To use the shuttle ring in normal mode
During playback or pause, turn the shuttle ring clockwise or anticlockwise.
Each change in the shuttle ring position changes the playback mode in the
following way.
Each change in the shuttle ring position changes the playback mode in the
following way.
To use the shuttle ring in jog mode
Use this mode for frame-by-frame playback.
Press JOG to enter the jog mode. The JOG button lights up. If you change to
the jog mode during any playback mode, playback pauses so you can see a
still picture. Each change in the shuttle ring position shifts the picture one
frame. To shift frames in reverse, turn the shuttle ring anticlockwise. The
frame shift speed depends on the speed you turn the shuttle ring.
the jog mode during any playback mode, playback pauses so you can see a
still picture. Each change in the shuttle ring position shifts the picture one
frame. To shift frames in reverse, turn the shuttle ring anticlockwise. The
frame shift speed depends on the speed you turn the shuttle ring.
To resume normal mode, press JOG again. The JOG button turns off.
Tip
• Adjust the picture using the PROGRAM +/– buttons on the VCR if:
• Adjust the picture using the PROGRAM +/– buttons on the VCR if:
– Streaks appear while playing in slow motion.
– Bands appear at the top or bottom while pausing.
– The picture shakes while pausing.
To set tracking to the centre position, press both buttons (+/–) at the same time.
– Bands appear at the top or bottom while pausing.
– The picture shakes while pausing.
To set tracking to the centre position, press both buttons (+/–) at the same time.
Notes
• The sound is muted during these operations.
• In the LP mode, noise may appear or there may be no colour.
• If the playback mode mark doesn’t appear on the TV screen, press
• The sound is muted during these operations.
• In the LP mode, noise may appear or there may be no colour.
• If the playback mode mark doesn’t appear on the TV screen, press
DISPLAY.
Pause
Slow motion
in reverse
in reverse
Normal speed
in reverse
in reverse
Double speed
in reverse
in reverse
High speed in
reverse
reverse
Slow motion
Double speed
High speed
Normal speed
(Initial speed)
(Initial speed)
65
Setting the recording duration time
Ad
d
d
itiona
l O
p
p
e
ra
tions
Setting the recording duration time
After you have started recording in the normal way, you can have the VCR stop
recording automatically after a specified duration.
recording automatically after a specified duration.
Before you start
…
• Refer to “Index to parts and controls” for button locations.
To extend the duration
Press
z REC repeatedly to set a new duration time.
To cancel the duration
Press
z REC repeatedly until the indicator disappears and the VCR
returns to the normal recording mode.
To stop recording
To stop the VCR while recording, press
x STOP.
Note
• You cannot display the current tape time in the display window when setting the
• You cannot display the current tape time in the display window when setting the
recording duration time.
1
While recording, press
z REC.
The
indicator appears in the display window.
2
Press
z REC repeatedly to set the duration time.
Each press advances the time in increments of 30 minutes.
The tape counter decreases minute by minute to 0:00, then the VCR stops
recording and turns off automatically.
recording and turns off automatically.
SP
OPC
VIDEO
0:30
1:00
5:30
6:00
Normal recording
66
Synchronized Recording (not available on SLV-SE610N/K)
Synchronized Recording
(not available on SLV-SE610N/K)
You can set the VCR to automatically record programmes from equipment
such as a satellite tuner by connecting the equipment to the DECODER/
LINE-3 IN*
such as a satellite tuner by connecting the equipment to the DECODER/
LINE-3 IN*
1
(or DECODER/LINE-2 IN*
2
) connector. The connected
equipment must have a timer function for this feature to work.
When the connected equipment turns on, the VCR also automatically turns
on and starts recording a programme from DECODER/LINE-3 IN*
on and starts recording a programme from DECODER/LINE-3 IN*
1
(or
DECODER/LINE-2 IN*
2
).
How to connect for Synchronized Recording
Connect the DECODER/LINE-3 IN*
1
(or DECODER/LINE-2 IN*
2
)
connector of the VCR to the TV Scart connector of the satellite tuner. Then
connect the LINE-1 (TV) connector to the TV.
connect the LINE-1 (TV) connector to the TV.
Scart cable (not supplied)
DECODER/
t LINE-3 IN*
1
or
DECODER/
DECODER/
t LINE-2 IN*
2
i LINE-1 (TV)
TV Scart
connector
connector
Satellite tuner, etc.
Scart cable (not supplied)
Scart (EURO-AV)
: Signal flow
67
Synchronized Recording (not available on SLV-SE610N/K)
Ad
d
d
itiona
l O
p
p
e
ra
tions
To cancel the Synchronized Recording function
Press SYNCHRO REC. The SYNCHRO indicator disappears.
To stop recording
Press
x STOP while recording.
Notes
• This function may not work with some types of satellite tuners.
• Some TVs or other equipment with timer functions will automatically turn off if no
• This function may not work with some types of satellite tuners.
• Some TVs or other equipment with timer functions will automatically turn off if no
operation is performed within a certain amount of time. In this case, the
Synchronized Recording also stops automatically.
Synchronized Recording also stops automatically.
• When the connected equipment turns on while the SYNCHRO indicator is
appeared, recording starts automatically.
• If the settings for timer recording and Synchronized Recording overlap, the
programme that starts first has priority and the second programme starts recording
only after the first programme has finished.
only after the first programme has finished.
• The Auto Clock Set function does not work while the VCR stands by for
Synchronized Recording.
*
1
SLV-SE810N/K only
*
2
SLV-SE710N/K and SX710N/K only
Recording programmes using
the Synchronized Recording
function
the Synchronized Recording
function
Before you start...
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
recording time.
• Set DECODER/LINE3*
1
(or DECODER/
LINE2*
2
) to LINE3*
1
(or LINE2*
2
) in the
OPTIONS-2 menu (see page 85).
• Refer to “Index to parts and controls” for
button locations.
1
Press INPUT SELECT or PROG +/– to display “L3*
1
(or L2*
2
)” in the
display window.
2
Set the timer on the connected equipment to the time of the programme
you want to record, then turn it off.
you want to record, then turn it off.
3
Press SP/LP to select the tape speed.
4
Hold down SYNCHRO REC for more than two seconds.
The SYNCHRO indicator appears in the display window and the VCR
stands by for recording.
stands by for recording.
The VCR automatically turns on and starts recording when it receives an
input signal from the connected equipment.
input signal from the connected equipment.
The VCR automatically stops recording when the tape reaches the end or
when the connected equipment stops transmitting an input signal.
when the connected equipment stops transmitting an input signal.
SYNCHRO REC
1-17
68
Checking/changing/cancelling timer settings
Checking/changing/cancelling timer
settings
settings
Before you start
…
• Turn on your TV and set it to the video channel.
• Refer to “Index to parts and controls” for button locations.
• Refer to “Index to parts and controls” for button locations.
1
Press
?/1 to turn on the VCR.
2
Press MENU, then press
M/m to highlight LISTS and press OK.
3
Press
M/m to highlight TIMER LIST,
then press OK:
• If you want to change or cancel a
setting, go on to the next step.
• If you do not need to change or cancel
the settings, press MENU, then turn off
the VCR to return to recording standby.
the VCR to return to recording standby.
4
Press
M/m to select the setting you want
to change or cancel, then press OK.
The selected setting appears in the
TIMER menu.
TIMER menu.
5
• To change the setting, press
</, to highlight the item you want to
change, then press
M/m to reset it.
• To cancel the setting, press CLEAR.
6
Press MENU to exit the menu.
If any settings remain, turn off the VCR to return to recording standby.
MENU
EXIT
:
TIMER LIST
CANCEL
SET
:
:
SELECT :
OK
CLEAR
RETURN
2 0 : 0 0
2 1 : 0 0
DATE
TIME
PROG.
AAB
LP
2
0 : 0 0
1 : 3 0
CDE
LP
MON
1 4 : 0 0
1 5 : 0 0
LP
SUN
6 : 3 0
7 : 0 0
SP
–
– : – –
– : – –
–
–
–
– . –
–
– FRI
. 1 0
VPS
PDC
PDC
VPS
PDC
PDC
0
3
. 9
1
1
FGH
I
FRI
2 8 .
9
1 9 : 0 0
2 0 : 0 0
3
SP
TODAY
5
J K
DATE
CANCEL
SET
:
:
SELECT :
CLEAR
MENU
EXIT
:
TIMER
SP / LP
LIST
TIME
PROG.
2
CDE
LP
VPS / PDC
ON
FRI
2 8 . 9
1 0 : 0 0
1 1 : 3 0
. 1 0
69
Checking/changing/cancelling timer settings
Ad
d
d
itiona
l O
p
p
e
ra
tions
When the timer settings overlap
The programme that starts first has priority and the second programme starts
recording only after the first programme has finished. If the programmes
start at the same time, the programme listed first in the menu has priority.
recording only after the first programme has finished. If the programmes
start at the same time, the programme listed first in the menu has priority.
Tip
• In step 6 above, you can check the TIMER LIST by selecting LIST and pressing
• In step 6 above, you can check the TIMER LIST by selecting LIST and pressing
OK. Press MENU to exit the TIMER LIST.
about 20 seconds
will be cut off
Programme 1
Programme 2
about 20 seconds will be cut off
Programme 1
Programme 2
70
Recording stereo and bilingual programmes
Recording stereo and bilingual
programmes
programmes
In ZWEITON (German stereo) system
This VCR automatically receives and records stereo and bilingual
programmes based on the ZWEITON system. When a stereo or bilingual
programme is received, the STEREO indicator appears in the display
window.
programmes based on the ZWEITON system. When a stereo or bilingual
programme is received, the STEREO indicator appears in the display
window.
To select bilingual sound while recording
Press AUDIO MONITOR to select the sound you want.
In NICAM system
(SLV-SE610N, SE710N, SX710N, and SE810N only)
(SLV-SE610N, SE710N, SX710N, and SE810N only)
This VCR receives and records stereo and bilingual programmes based on
the NICAM system (The NICAM indicator appears). When a stereo or
bilingual programme is received, the STEREO indicator appears in the
display window.
the NICAM system (The NICAM indicator appears). When a stereo or
bilingual programme is received, the STEREO indicator appears in the
display window.
To record a NICAM programme, HIFI AUDIO in the OPTIONS-1 menu
should be set to NICAM (initial setting). To check the menu setting, see
page 85 for details.
should be set to NICAM (initial setting). To check the menu setting, see
page 85 for details.
To select the sound while recording
Press AUDIO MONITOR to select the sound you want.
* Usually the mixed sound of left and right channels (monaural)
To listen to
On-screen display
Display window
Main
MAIN
STEREO
Sub
SUB
STEREO
Main and sub
MAIN/SUB
STEREO
Stereo programmes
To listen to
On-screen display
Display window
Stereo
STEREO
STEREO
Standard sound*
No indicator
No indicator
71
Recording stereo and bilingual programmes
Ad
d
d
itiona
l O
p
p
e
ra
tions
* Usually the main sound (monaural)
Selecting the sound during playback
Press AUDIO MONITOR to select the sound you want.
How sound is recorded on a video tape
The VCR records sound onto two separate tracks. Hi-fi audio is recorded
onto the main track along with the picture. Monaural sound is recorded onto
the normal audio track along the edge of the tape.
onto the main track along with the picture. Monaural sound is recorded onto
the normal audio track along the edge of the tape.
Bilingual programmes
To listen to
On-screen display
Display window
Main
MAIN
STEREO
Sub
SUB
STEREO
Main and sub
MAIN/SUB
STEREO
Standard sound*
No indicator
No indicator
To listen to
On-screen display
Display window
Stereo/main and sub
(left and right channels)
(left and right channels)
STEREO
STEREO
Left channel/main
LCH
STEREO
Right channel/sub
RCH
STEREO
Standard sound
No indicator
No indicator
Stereo
Usually mixed
left/right channels
left/right channels
Bilingual
Usually main sound
Normal audio track
(monaural)
(monaural)
Hi-fi audio track
(main track)
(main track)
Stereo sound
(left/right channels)
(left/right channels)
Main (left channel)
Sub (right channel)
Sub (right channel)
continued
1-18
72
Recording stereo and bilingual programmes
Notes
• To listen to playback sounds in stereo, you must use the Scart or AUDIO OUT
• To listen to playback sounds in stereo, you must use the Scart or AUDIO OUT
connections.
• When you play a tape recorded in monaural, the sound is heard in monaural
regardless of the AUDIO MONITOR setting.
• If the AUDIO MONITOR button does not function, check that AUDIO MIX*
1
in
the OPTIONS-1 menu is set to OFF (see page 84).
• If HIFI AUDIO*
1
is set to STANDARD, the standard sound will be recorded on
both the hi-fi and normal audio tracks. Pressing AUDIO MONITOR will not
change the sound.
change the sound.
*
1
SLV-SE610N, SE710N, SX710N, and SE810N only
73
Searching using the Smart Search function
Ad
d
d
itiona
l O
p
p
e
ra
tions
Searching using the Smart Search
function
function
If you record multiple programmes on a tape, you can use the Smart Search function
to see what has been recorded on your tape. You can see information such as date,
time, and programme position of the programmes recorded. You can also start
playback directly from the selected programme using the SMART SEARCH screen.
to see what has been recorded on your tape. You can see information such as date,
time, and programme position of the programmes recorded. You can also start
playback directly from the selected programme using the SMART SEARCH screen.
All programmes are listed on the screen, regardless of how the programme was
recorded.
recorded.
To store programme information, see “Storing the programme information” on page
75. If you eject the tape before storing the information, the information will be
cleared.
75. If you eject the tape before storing the information, the information will be
cleared.
Before you start…
• Turn on your TV and set it to the video channel.
• Refer to “Index to parts and controls” for button locations.
• Refer to “Index to parts and controls” for button locations.
To stop searching
Press
x STOP.
To exit the SMART SEARCH screen
Press MENU.
1
After recording, press
?/1 to turn on the
VCR.
2
Press SMART SEARCH.
3
Press
M/m/</, to select the programme
you want to start viewing.
4
Press OK.
The VCR starts searching, and playback
starts automatically from the beginning of
the selected programme.
starts automatically from the beginning of
the selected programme.
SMART SEARCH
SAVE :
1 4 : 0 0
1 5 : 0 0
FGH
0
2 0 : 0 0
2 1 : 0 0
AAB
2 9 . 9
. 9
6 : 3 0
7 : 0 0
I J K
1 . 1 0
3
SET
SELECT
SMART SEARCH
:
:
OK
1 9 : 0 0
2 0 : 0 0
3
2 8 . 9
5
DATE
TIME
PROG.
3 0 MIN.
BLANK TIME
1 8 0 MIN.
SMART SEARCH
NOW SEARCHING
1 8 0 MIN.
continued
74
Searching using the Smart Search function
To record in a blank space
Blank space on the tape will appear as a
blank row in the SMART SEARCH screen.
Select the last blank row in step 3, then press
OK. The VCR rewinds/fast-forwards the
tape to the beginning of the blank space, then
stops. Start recording. Note that “BLANK
TIME” and the remaining time indication
only refers to the length of the last blank
space.
blank row in the SMART SEARCH screen.
Select the last blank row in step 3, then press
OK. The VCR rewinds/fast-forwards the
tape to the beginning of the blank space, then
stops. Start recording. Note that “BLANK
TIME” and the remaining time indication
only refers to the length of the last blank
space.
Tips
• You can store information for up to 24 programmes on a single list.
• While recording, you can display the SMART SEARCH screen using the SMART
• You can store information for up to 24 programmes on a single list.
• While recording, you can display the SMART SEARCH screen using the SMART
SEARCH button. If you decide to stop recording, press MENU to make the
SMART SEARCH screen disappear first. Then press
SMART SEARCH screen disappear first. Then press
x STOP.
• You can have the player recall the data of the last cassette used to record
programmes even after you eject the tape (page 78).
Notes
• You cannot use this function unless the clock is set.
• Depending on the tape, the total or remaining time may not appear correctly.
• If many short programmes are recorded on a tape, multiple programmes may be
• You cannot use this function unless the clock is set.
• Depending on the tape, the total or remaining time may not appear correctly.
• If many short programmes are recorded on a tape, multiple programmes may be
included in a single block. In this case, only the latest programme information will
appear in the SMART SEARCH screen.
appear in the SMART SEARCH screen.
• Blank time is measured from the end of the last recorded programme to the end of
the tape. However, if you eject the tape and then make a new recording on the
same tape, the original recorded programme(s) is displayed as a blank space.
same tape, the original recorded programme(s) is displayed as a blank space.
• The station name* may not appear if the VCR does not receive station name
information signals.
• If you start recording a programme “D” from the middle of a previously recorded
programme “A” and into another previously recorded programme “B,” the Smart
Search information for the second programme “B,” which is recorded over, is
deleted.
Search information for the second programme “B,” which is recorded over, is
deleted.
* not available on SLV-SE610N/K
SMART SEARCH
SAVE :
1 4 : 0 0
1 5 : 0 0
FGH
0
2 9 . 9
. 9
3
SET
SELECT
SMART SEARCH
:
:
OK
DATE
TIME
PROG.
3 0 MIN.
BLANK TIME
2 0 : 0 0
2 1 : 0 0
AAB
6 : 3 0
7 : 0 0
1 . 1 0
I J K
1 8 0 MIN.
Originally recorded programmes
A
B
Recording the programme “D” over the programme “A” and “B”
C
A
D
C
75
Storing, searching and deleting programme information (Smart Search Plus)
Ad
d
d
itiona
l O
p
p
e
ra
tions
Storing, searching and deleting
programme information (Smart Search
Plus)
programme information (Smart Search
Plus)
You can store programme information, such as the recording date and time, and
programme position, for a maximum of four tapes. You can select a programme and
start playback, by recalling the information directly from the Smart Search Plus
screen.
programme position, for a maximum of four tapes. You can select a programme and
start playback, by recalling the information directly from the Smart Search Plus
screen.
Storing the programme information
You can store programme information for a maximum of four tapes. Before recording
a programme, select a memory bank number from the list on the SMART SEARCH
screen.
a programme, select a memory bank number from the list on the SMART SEARCH
screen.
The unit will not memorize the memory bank number for each cassette. Note the
number you assigned to each cassette.
number you assigned to each cassette.
Before you start...
• Turn on your TV and set it to the video channel.
• Refer to “Index to parts and controls” for button locations.
• Refer to “Index to parts and controls” for button locations.
1
Insert a cassette for recording.
The VCR automatically turns on.
2
Press SMART SEARCH.
The SMART SEARCH -RECALL-screen
appears.
appears.
RECALL is highlighted and the data for
the last cassette used to record
programmes appears.
the last cassette used to record
programmes appears.
3
Press
</, to select a memory bank
number.
Note the memory bank number on the
cassette.
cassette.
To cancel the process, press SMART
SEARCH.
SEARCH.
4
Press OK.
5
Start recording.
The information about the recorded programme will be stored on the
selected memory number.
selected memory number.
SMART SEARCH
EXIT
:
SET
SELECT
SMART SEARCH -RECALL-
:
:
OK
DATE
TIME
PROG.
RECALL
1
2
3
4
2 0 : 0 0
2 1 : 0 0
AAB
3 0 . 9
6 : 3 0
7 : 0 0
1 . 1 0
1 4 : 0 0
1 5 : 0 0
FGH
2 9 . 9
I J K
SMART SEARCH
EXIT
:
SET
SELECT
SMART SEARCH -RECALL-
:
:
OK
DATE
TIME
PROG.
RECALL
1
2
3
4
NO DATA
continued
Click on the first or last page to see other SLV-SE610A / SLV-SE610B / SLV-SE610E / SLV-SE610G / SLV-SE610K / SLV-SE610N / SLV-SE710B / SLV-SE710D / SLV-SE710E / SLV-SE710G / SLV-SE710I / SLV-SE710K / SLV-SE710N / SLV-SE810B / SLV-SE810D / SLV-SE810E / SLV-SE810G / SLV-SE810K / SLV-SE810N / SLV-SX71 service manuals if exist.