Sony SLV-SE310D / SLV-SE310I / SLV-SE410K / SLV-SE510B / SLV-SE510D / SLV-SE510K Service Manual ▷ View online
1-5
20
Setting up the VCR with the Auto Set Up function
Step 5 : Setting up the VCR with the Auto
Set Up function
Before using the VCR for the first time, set up the VCR using the Auto Set
Up function. With this function, you can set the language for the on-screen
display, TV channels, guide channels for the ShowView system*, and VCR
clock* automatically.
Up function. With this function, you can set the language for the on-screen
display, TV channels, guide channels for the ShowView system*, and VCR
clock* automatically.
1
Hold down AUTO SET UP on the VCR for more than three
seconds.
seconds.
The VCR automatically turns on, and the country abbreviation
appears in the display window.
appears in the display window.
2
Press PROGRAM +/– to select the abbreviation of your country
from the table on page 21.
from the table on page 21.
For some countries, there is a selection of languages to choose from.
If your country does not appear, select ELSE.
PROGRAM +/–
AUTO SET UP
AUTO SET UP
RF CHANNEL
PROGRAM
Getti
ng Sta
rted
21
Setting up the VCR with the Auto Set Up function
The abbreviations of the countries and languages are as follows:
To cancel the Auto Set Up function
Press AUTO SET UP.
Tip
• If you want to change the language for the on-screen display from the one preset in
• If you want to change the language for the on-screen display from the one preset in
the Auto Set Up function, see page 27.
3
Press AUTO SET UP lightly.
The VCR starts searching for all of the receivable channels and
presets them according to the TV system you selected in “Tuning
your TV to the VCR” on page 17.
presets them according to the TV system you selected in “Tuning
your TV to the VCR” on page 17.
If you want to change the order of the channels or disable unwanted
programme positions, see “Changing/disabling programme
positions” on page 32.
programme positions, see “Changing/disabling programme
positions” on page 32.
If you use the SMARTLINK connection*, the Preset Download
function starts and the SMARTLINK indicator flashes in the display
window during download.
function starts and the SMARTLINK indicator flashes in the display
window during download.
For SLV-SE510K:
After the search or download is complete, the current time appears
in the display window for any stations that transmit a time signal.
After the search or download is complete, the current time appears
in the display window for any stations that transmit a time signal.
For SLV-SE410K:
When no more receivable channels can be found, presetting stops
and “SET UP” disappears from the display window.
When no more receivable channels can be found, presetting stops
and “SET UP” disappears from the display window.
AUTO SET UP
RF CHANNEL
Abbreviation
Country
Language
CZ
Czecho
Czech
HUN
Hungary
Hungarian
PL
Poland
Polish
SK
Slovakia
Slovak
TR
Turkey
Turkish
RUS
Russia
Russian
ELSE
Other countries
English
continued
22
Setting up the VCR with the Auto Set Up function
Notes
• If you stop the Auto Set Up function during step 3, you must repeat set up from
• If you stop the Auto Set Up function during step 3, you must repeat set up from
step 1.
• Whenever you operate the Auto Set Up function, some of the settings
(ShowView*, timer, etc.) will be reset. If this happens, you have to set them again.
* SLV-SE510K only
Getti
ng Sta
rted
23
Setting the clock
Step 6 : Setting the clock
You must set the time and date on the VCR to use the timer features properly.
The Auto Clock Set function (SLV-SE510K only) works only if a station in your area
is broadcasting a time signal. If the Auto Set Up function did not set the clock
correctly for your local area, try another station for the Auto Clock Set function.
is broadcasting a time signal. If the Auto Set Up function did not set the clock
correctly for your local area, try another station for the Auto Clock Set function.
Setting the clock manually
Before you start
…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
• Refer to “Index to parts and controls” for button locations.
• Set the TV to the video channel.
• Refer to “Index to parts and controls” for button locations.
1
Press MENU, then press M/m to
highlight SETTINGS and press OK.
highlight SETTINGS and press OK.
2
Press M/m to highlight CLOCK,
then press OK.
then press OK.
For SLV-SE410K, only the clock
setting menu appears. Skip the next
step and go to step 4.
setting menu appears. Skip the next
step and go to step 4.
3
Press M/m to highlight MANUAL
ADJUST, then press OK.
ADJUST, then press OK.
MENU
OK
PLAY
SET
:
SELECT :
OK
MENU
EXIT
:
SETTINGS
RETURN
TUNER
CLOCK
LANGUAGE
CLOCK
LANGUAGE
OK
PLAY
SET
:
SELECT :
OK
MENU
EXIT
:
CLOCK
OFF
AUTO ADJUST
CLOCK PROGRAM
MANUAL ADJUST
CLOCK PROGRAM
MANUAL ADJUST
.
1
1 . 2 0 0 1
MON
0 : 0 0
OK
PLAY
CONFIRM :
SET
:
OK
MENU
EXIT
:
CLOCK
OFF
AUTO ADJUST
CLOCK PROGRAM
MANUAL ADJUST
CLOCK PROGRAM
MANUAL ADJUST
1 .
1 . 2 0 0 1
MON
0 : 0 0
SELECT
:
continued
1-6
24
Setting the clock
Tips
• To change the digits while setting, press < to return to the item to be changed, and
• To change the digits while setting, press < to return to the item to be changed, and
select the digits by pressing M/m.
• If you want to return to the previous menu, highlight RETURN and press OK.
Note
• The menu disappears automatically if you don’t proceed for more than a few
• The menu disappears automatically if you don’t proceed for more than a few
minutes.
4
Press M/m to set the day.
5
Press , to highlight the month and
set the month pressing M/m.
set the month pressing M/m.
6
Set the year, hour, and minutes in
sequence, pressing , to highlight
the item to be set, and press M/m to
select the digits.
sequence, pressing , to highlight
the item to be set, and press M/m to
select the digits.
The day of the week is set
automatically.
automatically.
7
Press OK to start the clock.
8
Press MENU to exit the menu.
OK
PLAY
CONFIRM :
SET
:
OK
MENU
EXIT
:
CLOCK
OFF
AUTO ADJUST
CLOCK PROGRAM
MANUAL ADJUST
CLOCK PROGRAM
MANUAL ADJUST
8 .
1 . 2 0 0 1
SUN
0 : 0 0
SELECT
:
2
OK
PLAY
CONFIRM :
SET
:
OK
MENU
EXIT
:
CLOCK
OFF
AUTO ADJUST
CLOCK PROGRAM
MANUAL ADJUST
CLOCK PROGRAM
MANUAL ADJUST
8 .
9 . 2 0 0 1
FRI
0 : 0 0
SELECT
:
2
OK
PLAY
CONFIRM :
SET
:
OK
MENU
EXIT
:
CLOCK
OFF
AUTO ADJUST
CLOCK PROGRAM
MANUAL ADJUST
CLOCK PROGRAM
MANUAL ADJUST
8 .
FRI
8 : 0 0
SELECT
:
2
1
. 2 0 0 1
9
OK
PLAY
MENU
EXIT
:
CLOCK
OFF
AUTO ADJUST
CLOCK PROGRAM
MANUAL ADJUST
CLOCK PROGRAM
MANUAL ADJUST
8 .
FRI
8 : 0 0
2
1
SET
:
SELECT :
OK
. 2 0 0 1
9
MENU
Getti
ng Sta
rted
25
Setting the clock
Changing the station for the Auto Clock Set function
(SLV-SE510K only)
(SLV-SE510K only)
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
• Refer to “Index to parts and controls” for button locations.
• Set the TV to the video channel.
• Refer to “Index to parts and controls” for button locations.
1
Press MENU, then press M/m to
highlight SETTINGS and press OK.
highlight SETTINGS and press OK.
2
Press M/m to highlight CLOCK,
then press OK.
then press OK.
AUTO ADJUST is highlighted.
3
Press OK.
4
Press M/m to highlight ON, then
press OK.
press OK.
MENU
OK
PLAY
SET
:
SELECT :
OK
MENU
EXIT
:
SETTINGS
RETURN
TUNER
CLOCK
LANGUAGE
CLOCK
LANGUAGE
OK
PLAY
SET
:
SELECT :
OK
MENU
EXIT
:
CLOCK
ON
1
AAB
AUTO ADJUST
CLOCK PROGRAM
MANUAL ADJUST
CLOCK PROGRAM
MANUAL ADJUST
.
8
FRI
8 : 0 0
1
2
. 2 0 0 1
9
OK
PLAY
CONFIRM :
SELECT
:
OK
MENU
EXIT
:
CLOCK
OFF
AUTO ADJUST
CLOCK PROGRAM
MANUAL ADJUST
CLOCK PROGRAM
MANUAL ADJUST
FRI
8 : 0 0
8 .
ON
2
1
. 2 0 0 1
9
OK
PLAY
SET
:
SELECT :
OK
MENU
EXIT
:
CLOCK
ON
1
AAB
AUTO ADJUST
CLOCK PROGRAM
MANUAL ADJUST
CLOCK PROGRAM
MANUAL ADJUST
.
8
FRI
8 : 0 0
1
2
. 2 0 0 1
9
continued
26
Setting the clock
Tips
• If you set AUTO ADJUST to ON, the Auto Clock Set function is activated
• If you set AUTO ADJUST to ON, the Auto Clock Set function is activated
whenever the VCR is turned off. The time is adjusted automatically by making
reference to the time signal from the station whose programme position is
displayed in the “CLOCK PROGRAM” row.
If you do not need the Auto Clock Set, select OFF.
reference to the time signal from the station whose programme position is
displayed in the “CLOCK PROGRAM” row.
If you do not need the Auto Clock Set, select OFF.
• If you want to return to the previous menu, highlight RETURN and press OK.
Note
• The menu disappears automatically if you don’t proceed for more than a few
• The menu disappears automatically if you don’t proceed for more than a few
minutes.
5
Press m to highlight CLOCK
PROGRAM, then press OK.
PROGRAM, then press OK.
6
Press M/m repeatedly until the
programme position of the station
that carries a time signal appears.
programme position of the station
that carries a time signal appears.
If the VCR does not receive a time
signal from any station, AUTO
ADJUST returns to OFF
automatically.
signal from any station, AUTO
ADJUST returns to OFF
automatically.
7
Press MENU to exit the menu.
OK
PLAY
CONFIRM :
SELECT
:
OK
MENU
EXIT
:
CLOCK
AUTO ADJUST
CLOCK PROGRAM
MANUAL ADJUST
CLOCK PROGRAM
MANUAL ADJUST
FRI
8 : 0 0
8 .
1
AAB
2
1
. 2 0 0 1
9
OK
PLAY
CONFIRM :
SELECT
:
OK
MENU
EXIT
:
CLOCK
AUTO ADJUST
CLOCK PROGRAM
MANUAL ADJUST
CLOCK PROGRAM
MANUAL ADJUST
. 2 0 0 1
FRI
8 : 0 0
8 .
9
2
CDE
2
1
MENU
Getti
ng Sta
rted
27
Selecting a language
Selecting a language
You can change the on-screen display language from the one you selected with the
Auto Set Up function.
Auto Set Up function.
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
• Refer to “Index to parts and controls” for button locations.
• Set the TV to the video channel.
• Refer to “Index to parts and controls” for button locations.
Tip
• If you want to return to the previous menu, highlight RETURN and press OK.
• If you want to return to the previous menu, highlight RETURN and press OK.
Note
• The menu disappears automatically if you don’t proceed for more than a few
• The menu disappears automatically if you don’t proceed for more than a few
minutes.
1
Press MENU, then press M/m to
highlight SETTINGS and press OK.
highlight SETTINGS and press OK.
2
Press M/m to highlight
LANGUAGE, then press OK.
LANGUAGE, then press OK.
3
Press M/m to highlight the desired language, then press OK.
4
Press MENU to exit the menu.
MENU
OK
PLAY
SET
:
SELECT :
OK
MENU
EXIT
:
SETTINGS
RETURN
TUNER
CLOCK
LANGUAGE
CLOCK
LANGUAGE
OK
PLAY
SET
:
SELECT
OK
MENU
EXIT
:
LANGUAGE
:
OK
PLAY
MENU
1-7
28
Presetting channels
Presetting channels
If some channels could not be preset using the Auto Set Up function, you can preset
them manually.
them manually.
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
• Refer to “Index to parts and controls” for button locations.
• Set the TV to the video channel.
• Refer to “Index to parts and controls” for button locations.
1
Press MENU, then press M/m to
highlight SETTINGS and press OK.
highlight SETTINGS and press OK.
2
Press M/m to highlight TUNER,
then press OK.
then press OK.
3
Press M/m to highlight NORMAL/
CATV, then press OK.
CATV, then press OK.
4
Press M/m to highlight NORMAL,
then press OK.
then press OK.
To preset CATV (Cable Television)
channels, select CATV.
channels, select CATV.
MENU
OK
PLAY
SET
:
SELECT :
OK
MENU
EXIT
:
SETTINGS
RETURN
TUNER
CLOCK
LANGUAGE
CLOCK
LANGUAGE
OK
PLAY
SET
:
SELECT :
OK
MENU
EXIT
:
TUNER
C
AAB
1 2
PROG.
1
NORMAL / CATV
CHANNEL SET
PAY - TV / CANAL+
AFT
FINE TUNING
CHANNEL SET
PAY - TV / CANAL+
AFT
FINE TUNING
NORMAL
OFF
ON
ON
RETURN
SYSTEM
D / K
OK
PLAY
MENU
EXIT
:
TUNER
CATV
PROG.
NORMAL / CATV
CHANNEL SET
PAY - TV / CANAL+
AFT
FINE TUNING
CHANNEL SET
PAY - TV / CANAL+
AFT
FINE TUNING
NORMAL
ON
RETURN
1
CONFIRM :
SELECT
:
OK
SYSTEM
OK
PLAY
SET
:
SELECT :
OK
MENU
EXIT
:
TUNER
C
AAB
1 2
PROG.
1
NORMAL / CATV
CHANNEL SET
PAY - TV / CANAL+
AFT
FINE TUNING
CHANNEL SET
PAY - TV / CANAL+
AFT
FINE TUNING
NORMAL
OFF
ON
ON
RETURN
SYSTEM
D / K
Getti
ng Sta
rted
29
Presetting channels
5
Press PROG +/– to select the
programme position.
programme position.
6
Press M/m to highlight CHANNEL
SET, then press OK.
SET, then press OK.
SET
:
SELECT :
OK
MENU
EXIT
:
TUNER
C
AAB
1 2
PROG.
4
NORMAL / CATV
CHANNEL SET
PAY - TV / CANAL+
AFT
FINE TUNING
CHANNEL SET
PAY - TV / CANAL+
AFT
FINE TUNING
NORMAL
OFF
ON
ON
RETURN
SYSTEM
D / K
Selected programme position
OK
PLAY
MENU
EXIT
:
TUNER
C
AAB
1 2
PROG.
NORMAL / CATV
CHANNEL SET
PAY - TV / CANAL+
AFT
FINE TUNING
CHANNEL SET
PAY - TV / CANAL+
AFT
FINE TUNING
ON
RETURN
4
CONFIRM :
SELECT
:
OK
SYSTEM
D / K
continued
30
Presetting channels
7
Press M/m repeatedly until the
channel you want is displayed.
channel you want is displayed.
The channels appear in the
following order:
following order:
If you know the number of the channel you want, press the
programme number buttons. For example, for channel 5, first press
“0” and then press “5.”
programme number buttons. For example, for channel 5, first press
“0” and then press “5.”
8
If the TV sound is distorted or
noisy, press M/m to highlight
SYSTEM and press OK. Then
press M/m to select B/G or D/K so
that you get better sound.
noisy, press M/m to highlight
SYSTEM and press OK. Then
press M/m to select B/G or D/K so
that you get better sound.
OK
PLAY
1
2
3
4
5
6
7
8
9
0
MENU
EXIT
:
TUNER
C 2 7
PROG.
NORMAL / CATV
CHANNEL SET
PAY - TV / CANAL+
AFT
FINE TUNING
CHANNEL SET
PAY - TV / CANAL+
AFT
FINE TUNING
ON
RETURN
4
CONFIRM :
SELECT
:
OK
SYSTEM
D / K
B/G TV system
D/K TV system
Channel
number in the
CHANNEL
SET field
number in the
CHANNEL
SET field
Receivable
Channel
Channel
Channel
number in the
CHANNEL
SET field
number in the
CHANNEL
SET field
Receivable
Channel
Channel
C02
E2
C02
R1
C03
E3
C05
R6
C04
E4
C06
R7
C05
E5
C12
R12
C06
E6
C13
R2
C07
E7
C14
R3
C08
E8
C15
R4
C09
E9
C16
R5
C10
E10
C17
R8
C11
E11
C18
R9
C12
E12
C19
R10
C21–C69
E21–E69
C20
R11
S01–S41
S1–S41
C21–C69
R21–R69
S42–S46
S01–S05
OK
PLAY
MENU
EXIT
:
TUNER
PROG.
NORMAL / CATV
CHANNEL SET
CHANNEL SET
SYSTEM
AFT
FINE TUNING
FINE TUNING
B / G
D / K
RETURN
4
ON
CONFIRM
:
SELECT
:
OK
PAY - TV / CANAL+
OFF
Getti
ng Sta
rted
31
Presetting channels
If the picture is not clear
Normally, the Auto Fine Tuning (AFT) function automatically tunes in
channels clearly. However, if the picture is not clear, you may also use the
manual tuning function.
channels clearly. However, if the picture is not clear, you may also use the
manual tuning function.
Tip
• If you want to return to the previous menu, highlight RETURN and press OK.
• If you want to return to the previous menu, highlight RETURN and press OK.
Notes
• The menu disappears automatically if you don’t proceed for more than a few
• The menu disappears automatically if you don’t proceed for more than a few
minutes.
• When adjusting FINE TUNING, the menu may become difficult to read due to
interference from the picture being received.
9
To preset another programme position, repeat steps 5 through 7.
10
Press MENU to exit the menu.
1
Press PROG +/– or the programme number buttons to select the
programme position for which you cannot obtain a clear picture.
programme position for which you cannot obtain a clear picture.
2
Press MENU, then select SETTINGS and press OK.
3
Select TUNER, then press OK.
4
Select FINE TUNING, then press OK.
The fine tuning meter appears.
5
Press </, to get a clearer picture, then press MENU to exit the menu.
Note that the AFT (Auto Fine Tuning) setting switches to OFF.
MENU
SET :
MENU
EXIT
:
TUNER
C 2 7
PROG.
NORMAL / CATV
CHANNEL SET
PAY - TV / CANAL+
AFT
FINE TUNING
CHANNEL SET
PAY - TV / CANAL+
AFT
FINE TUNING
NORMAL
OFF
RETURN
4
SYSTEM
D / K
Selected programme
position
position
1-8
32
Changing/disabling programme positions
Changing/disabling programme positions
After setting the channels, you can change the programme positions as you like. If
any programme positions are unused or contain unwanted channels, you can disable
them.
any programme positions are unused or contain unwanted channels, you can disable
them.
You can also change the station names (SLV-SE510K only). If the station names are
not displayed, you can enter them manually.
not displayed, you can enter them manually.
Changing programme positions
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
• Refer to “Index to parts and controls” for button locations.
• Set the TV to the video channel.
• Refer to “Index to parts and controls” for button locations.
1
Press MENU, then press M/m to
highlight LISTS and press OK.
highlight LISTS and press OK.
2
Press M/m to highlight CHANNEL
LIST, then press OK.
LIST, then press OK.
3
Press M/m to highlight the row
which you want to change the
programme position, then press ,.
which you want to change the
programme position, then press ,.
To display other pages for
programme positions 6 to 60, press
M/m repeatedly.
programme positions 6 to 60, press
M/m repeatedly.
MENU
OK
PLAY
RETURN
SET
:
SELECT :
OK
MENU
EXIT
:
LISTS
CHANNEL LIST
TIMER LIST
TIMER LIST
OK
PLAY
MENU
EXIT
:
CHANNEL LIST
ERASE PROGRAM
MOVE PROGRAM
:
:
PROG
SELECT
:
1
2
3
4
5
2
3
4
5
AAB
CDE
CDE
FGH
C
C
C
C
C
C
1
0
5
0
5
0
2
3
6
3
6
9
NAME
CH
C 2 7
CLEAR
OK
PLAY
MENU
EXIT
:
CHANNEL LIST
PROG
1
2
3
4
5
3
4
5
AAB
CDE
CDE
FGH
C
C
C
C
C
C
1
0
5
0
5
0
2
3
6
3
6
9
NAME
CH
C 2 7
CONFIRM
SET STATION NAME
:
:
SELECT
:
OK
Getti
ng Sta
rted
33
Changing/disabling programme positions
Tip
• If you want to return to the previous menu, highlight RETURN and press OK.
• If you want to return to the previous menu, highlight RETURN and press OK.
Note
• The menu disappears automatically if you don’t proceed for more than a few
• The menu disappears automatically if you don’t proceed for more than a few
minutes.
Disabling unwanted programme positions
After presetting channels, you can disable unused programme positions. The disabled
positions will be skipped later when you press the PROG +/– buttons.
positions will be skipped later when you press the PROG +/– buttons.
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
• Refer to “Index to parts and controls” for button locations.
• Set the TV to the video channel.
• Refer to “Index to parts and controls” for button locations.
4
Press M/m until the selected
channel row moves to the desired
programme position.
channel row moves to the desired
programme position.
The selected channel is inserted at
the new programme position and
the intermediate channels are
displaced to fill the gap.
the new programme position and
the intermediate channels are
displaced to fill the gap.
5
Press OK to confirm the setting.
6
To change the programme position of another station, repeat steps 3
through 5.
through 5.
7
Press MENU to exit the menu.
1
Press MENU, then press M/m to
highlight LISTS, and press OK.
highlight LISTS, and press OK.
OK
PLAY
MENU
EXIT
:
CHANNEL LIST
CONFIRM
SET STATION NAME
:
:
PROG
SELECT
:
1
2
2
3
4
5
5
CDE
AAB
FGH
C
C
C
C
C
C
0
5
1
5
1
0
3
6
2
6
2
9
NAME
CH
C 2 7
OK
OK
PLAY
MENU
MENU
OK
PLAY
RETURN
SET
:
SELECT :
OK
MENU
EXIT
:
LISTS
CHANNEL LIST
TIMER LIST
TIMER LIST
continued
34
Changing/disabling programme positions
Tip
• If you want to return to the previous menu, highlight RETURN and press OK.
• If you want to return to the previous menu, highlight RETURN and press OK.
Notes
• The menu disappears automatically if you don’t proceed for more than a few
• The menu disappears automatically if you don’t proceed for more than a few
minutes.
• Be sure to select the programme position you want to disable correctly. If you
disable a programme position by mistake, you need to reset that channel manually.
2
Press M/m to highlight CHANNEL
LIST, then press OK.
LIST, then press OK.
3
Press M/m to highlight the row
which you want to disable.
which you want to disable.
4
Press CLEAR.
The selected row will be cleared as
shown on the right.
shown on the right.
5
Repeat steps 3 and 4 for any other programme positions you want to
disable.
disable.
6
Press MENU to exit the menu.
OK
PLAY
MENU
EXIT
:
CHANNEL LIST
PROG
1
2
3
4
5
2
3
4
5
AAB
CDE
CDE
FGH
C
C
C
C
C
C
1
0
5
0
5
0
2
3
6
3
6
9
NAME
CH
C 2 7
ERASE PROGRAM
MOVE PROGRAM
:
:
SELECT
:
CLEAR
OK
PLAY
MENU
EXIT
:
CHANNEL LIST
PROG
1
2
3
4
5
2
3
4
5
AAB
CDE
CDE
FGH
C
C
C
C
C
C
1
0
5
0
5
0
2
3
6
3
6
9
NAME
CH
C 2 7
ERASE PROGRAM
MOVE PROGRAM
:
:
SELECT
:
CLEAR
CLEAR
MENU
EXIT
:
CHANNEL LIST
PROG
1
2
3
4
5
2
3
4
5
AAB
CDE
CDE
FGH
C
C
C
C
1
0
0
0
2
3
3
9
NAME
CH
C 2 7
ERASE PROGRAM
MOVE PROGRAM
:
:
SELECT
:
CLEAR
MENU
Getti
ng Sta
rted
35
Changing/disabling programme positions
Changing the station names (SLV-SE510K only)
You can change or enter the station names (up to 5 characters). The VCR must
receive channel information (for instance, SMARTLINK information) for station
names to appear automatically.
receive channel information (for instance, SMARTLINK information) for station
names to appear automatically.
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
• Refer to “Index to parts and controls” for button locations.
• Set the TV to the video channel.
• Refer to “Index to parts and controls” for button locations.
1
Press MENU, then press M/m to
highlight LISTS and press OK.
highlight LISTS and press OK.
2
Press M/m to highlight CHANNEL
LIST, then press OK.
LIST, then press OK.
3
Press M/m to highlight the row
which you want to change or enter
the station name, then press ,.
which you want to change or enter
the station name, then press ,.
To display other pages for
programme positions 6 to 60, press
M/m repeatedly.
programme positions 6 to 60, press
M/m repeatedly.
4
Press ,.
MENU
OK
PLAY
RETURN
SET
:
SELECT :
OK
MENU
EXIT
:
LISTS
CHANNEL LIST
TIMER LIST
TIMER LIST
OK
PLAY
MENU
EXIT
:
CHANNEL LIST
PROG
1
2
3
4
5
2
3
4
5
AAB
CDE
CDE
FGH
C
C
C
C
C
C
1
0
5
0
5
0
2
3
6
3
6
9
NAME
CH
C 2 7
ERASE PROGRAM
MOVE PROGRAM
:
:
SELECT
:
CLEAR
OK
PLAY
MENU
EXIT
:
CHANNEL LIST
PROG
1
2
3
4
5
3
4
5
AAB
CDE
CDE
FGH
C
C
C
C
C
C
1
0
5
0
5
0
2
3
6
3
6
9
NAME
CH
C 2 7
CONFIRM
SET STATION NAME
:
:
SELECT
:
OK
OK
PLAY
MENU
EXIT
:
CHANNEL LIST
CONFIRM
OK
NEXT
:
:
PROG
SELECT A CHARACTER
:
1
2
3
4
5
3
4
5
AAB
CDE
CDE
FGH
C
C
C
C
C
C
1
0
5
0
5
0
2
3
6
3
6
9
NAME
CH
C 2 7
continued
Click on the first or last page to see other SLV-SE310D / SLV-SE310I / SLV-SE410K / SLV-SE510B / SLV-SE510D / SLV-SE510K service manuals if exist.