Sony SLV-SE230B / SLV-SE230D / SLV-SE230G / SLV-SE230I / SLV-SE430K / SLV-SE630B / SLV-SE630D / SLV-SE630E / SLV-SE630N / SLV-SE730B / SLV-SE730D / SLV-SE730E / SLV-SE730G / SLV-SE730I / SLV-SE730N / SLV-SE737E / SLV-SE830B / SLV-SE830D / SLV-SE830E / SLV-SE83 Service Manual ▷ View online
1-17
68
Adjusting the picture
Adjusting the picture
Adjusting the tracking
Although the VCR automatically adjusts the
tracking when playing a tape, distortion may
occur if the recording is in poor condition. In
this case, manually adjust the tracking.
tracking when playing a tape, distortion may
occur if the recording is in poor condition. In
this case, manually adjust the tracking.
During playback, press PROGRAM +/– on
the VCR to display the tracking meter. The
distortion should disappear as you press one
of the two buttons. To resume automatic
tracking adjustments, eject the tape and re-
insert it.
the VCR to display the tracking meter. The
distortion should disappear as you press one
of the two buttons. To resume automatic
tracking adjustments, eject the tape and re-
insert it.
Adjusting the picture sharpness (Smart trilogic)
You can automatically adjust the sharpness of the picture.
1
During playback, press MENU, then press M/m/</, to highlight
USER SET and press OK.
USER SET and press OK.
2
Press M/m to highlight SMART
TRILOGIC, then press ,.
TRILOGIC, then press ,.
3
Press M/m to set SMART TRILOGIC to
ON or OFF.
ON or OFF.
• ON: Picture sharpness is automatically
adjusted.
• OFF: Adjust the picture sharpness
manually.
To soften the picture, press <.
To sharpen the picture, press ,.
To soften the picture, press <.
To sharpen the picture, press ,.
4
Press MENU to return to the original screen.
T R A C K I N G – – – – – –
– – – – – –
Tracking meter
S E T
M E N U
:
:
O K
:
E N D
S E L E C T
O S D
:
T A P E S E L E C T
O N
:
O F F
:
C O L O U R S Y S T E M
E
: 9
1 8
1 6
0
:
F O R M A T
A U T O
A U T O
A U T O
:
N I C A M
P O W E R S A V E
P O W E R S A V E
O N
:
S M A R T T R I L O G I C
O N
:
:
E X I T
S E T
M E N U
:
:
O K
:
S O F T E N
S M A R T T R I L O G I C : O F F
S H A R P E N
– –
– – – –
– – –
– – –
– – –
– – – – – –
P I C T U R E
E N D
E X I T
O N / O F F
:
70
Changing menu options
Changing menu options
Menu choices
Initial settings are indicated in bold print.
USER SET
1
Press MENU, then select USER SET or EASY OPERATION and press
OK.
OK.
2
Press M/m to select the option.
3
Press , to change the setting, then press OK.
Menu option
Set this option to
OSD
•
ON to display the menu on the TV screen.
• OFF to disappear the menu from the TV screen.
TAPE SELECT
•
E180 to use an E-180 or shorter type tape.
• E240 to use an E-240 type tape.
• E260 to use an E-260 type tape.
• E300 to use an E-300 type tape.
• E260 to use an E-260 type tape.
• E300 to use an E-300 type tape.
COLOUR SYSTEM
•
AUTO to set the colour system automatically.
• PAL to play back a tape recorded in the PAL colour
system.
• MESECAM to play back a tape recorded in the
MESECAM colour system.
If you press Z (eject) or turn the VCR off, COLOUR
SYSTEM will be reset to AUTO.
SYSTEM will be reset to AUTO.
FORMAT 16:9
•
AUTO when you use a wide screen TV. The VCR
automatically detects if programmes being played back
or recorded are in normal or wide screen format.
automatically detects if programmes being played back
or recorded are in normal or wide screen format.
• ON if the VCR cannot detect wide screen TV
programmes with AUTO. The VCR always plays back
and records in wide screen format.
and records in wide screen format.
• OFF if you are not using a wide screen TV.
S E T
M E N U
:
:
O K
:
E N D
S E L E C T
O S D
O N
:
O N
:
T A P E S E L E C T
E 1 8
1 6
9
0
:
C O L O U R S Y S T E M
A U T O
A U T O
A U T O
:
:
F O R M A T
N I C A M
N I C A M
O F F
:
P O W E R S A V E
O N
:
S M A R T T R I L O G I C
:
:
E X I T
E X I T
S E T
M E N U
:
:
O K
:
E N D
S E L E C T
V P S / P D C D E F A U L T
S H O W V I E W E X T E N D
S H O W V I E W E X T E N D
O F F
:
A U T O P O W E R O F F
O F F
:
O F F
:
T I M E R M E T H O D
V A R I A B L E
:
:
71
Changing menu options
Ad
ditional Operations
ditional Operations
EASY OPERATION
*
1
not available on SLV-SE430K
*
2
not available on SLV-SE630N and SE430K
NICAM*
1
•
ON to record NICAM broadcasts on the hi-fi audio
track.
track.
• OFF to record standard sound on the hi-fi audio track.
For details, see page 63.
For details, see page 63.
POWER SAVE
• ECO1 to turn off the indicators in the display window to
conserve the VCR’s power.
• ECO2 to turn off the indicators in the display window
during standby mode to reduce the VCR’s power
consumption to a minimum. For using the Line Through
function and Canal plus function, select ECO1 or OFF.
consumption to a minimum. For using the Line Through
function and Canal plus function, select ECO1 or OFF.
•
OFF to turn on the indicators in the display window
while the VCR is standing by.
while the VCR is standing by.
SMART TRILOGIC
•
ON to automatically adjust the sharpness of the picture.
• OFF to manually adjust the sharpness of the picture.
Menu option
Set this option to
VPS/PDC
DEFAULT*
DEFAULT*
2
•
OFF to deactivate the VPS/PDC function.
• ON to activate it.
SHOWVIEW
EXTEND*
EXTEND*
2
•
OFF to deactivate the ShowView Extend function.
• 10/20/30/.../60 (minutes) to extend the time of the
ShowView setting by the selected amount of time.
AUTO POWER OFF
•
OFF to deactivate the Auto Power Off function.
• 2HOUR/3HOUR to turn the VCR off automatically if no
signal is received and you do not press any of the buttons
during this time.
during this time.
TIMER METHOD*
2
•
VARIABLE to display the TIMER METHOD menu for
selecting STANDARD or SHOWVIEW when pressing
the
selecting STANDARD or SHOWVIEW when pressing
the
TIMER button.
• STANDARD to display the TIMER PROGRAMMING
menu when pressing the
TIMER button.
• SHOWVIEW to display the SHOWVIEW menu when
pressing the
TIMER button.
For details, see pages 51 and 55.
Menu option
Set this option to
69
Reducing the VCR’s power consumption
Ad
ditional Operations
ditional Operations
Reducing the VCR’s power consumption
You can turn off the indicators in the display window when the VCR is off (standby
mode) to reduce the VCR’s power consumption.
mode) to reduce the VCR’s power consumption.
To turn on the indicators in the display window
Set POWER SAVE to OFF in step 3.
Notes
• When the VCR stands by for recording, the
indicator in the display window
remain lit even when POWER SAVE is set to ECO1 or ECO2.
• The Line Through function will not operate properly if POWER SAVE is set to
ECO2. Set POWER SAVE to OFF or ECO1 to ensure proper operation.
1
Press MENU, then press M/m/</, to highlight USER SET and press
OK.
OK.
2
Press M/m to highlight POWER SAVE.
3
Press , to set to ECO1 or ECO2, then
press OK.
press OK.
• ECO1: To reduce the power
consumption.
• ECO2: To reduce the power
consumption to a minimum.
S E T
M E N U
:
:
O K
:
E N D
S E L E C T
O S D
O N
:
O N
:
T A P E S E L E C T
E 1 8
1 6
9
0
:
C O L O U R S Y S T E M
A U T O
A U T O
A U T O
:
:
F O R M A T
N I C A M
N I C A M
E C O 1
:
P O W E R S A V E
O N
:
S M A R T T R I L O G I C
:
:
E X I T
1-18
72
Connecting to a VCR or stereo system
Editing
Connecting to a VCR or stereo system
How to connect to record on this VCR
Connect the line outputs of the other VCR to the input connector of this
VCR. Refer to the examples A through C and choose the connection that
best suits your VCR.
VCR. Refer to the examples A through C and choose the connection that
best suits your VCR.
Example A
Example B (SLV-SE830N only)
TV
LINE-1 (EURO AV)
Scart cable (not supplied)
Scart
(EURO-AV)
(EURO-AV)
: Signal flow
Your VCR (Recorder)
Other VCR (Player)
TV
Audio/video cable (not supplied)
LINE OUT
Your VCR (Recorder)
Other VCR (Player)
: Signal flow
t LINE-2 L o R
(open cover to connect)
(open cover to connect)
73
Connecting to a VCR or stereo system
Editing
Example C
How to connect to a stereo system (SLV-SE830N only)
Connect the
t
LINE-2 L
o
R jacks on this VCR to the audio output jacks
on the stereo system, using an audio cable (not supplied).
Notes
• Make sure you connect the plugs to jacks of the same colour.
• If the other VCR is a monaural type, leave the red plugs unconnected.
• If you connect this VCR to both the LINE IN and LINE OUT jacks of the other
• Make sure you connect the plugs to jacks of the same colour.
• If the other VCR is a monaural type, leave the red plugs unconnected.
• If you connect this VCR to both the LINE IN and LINE OUT jacks of the other
VCR, select the input correctly to prevent a humming noise.
• If the other VCR does not have a Scart (EURO-AV) connector, use an adequate
cable instead and connect the cable to the line out jacks of the other VCR.
• When you connect another VCR to the LINE-3 (DEC/EXT)*
1
or LINE-2 (DEC/
EXT)*
2
connector, press INPUT SELECT to display “L3”*
1
or “L2”*
2
in the
display window.
*
1
SLV-SE830N
*
2
SLV-SE730N, SX730N, SE630N and SE430K
TV
LINE-3 (DEC/EXT)*
1
or
LINE-2 (DEC/EXT)*
2
Scart cable (not supplied)
Scart
(EURO-AV)
(EURO-AV)
: Signal flow
Your VCR (Recorder)
Other VCR (Player)
74
Basic editing
Basic editing
When recording on this VCR
Before you start editing
• Turn on your TV and set it to the video
channel.
• Press INPUT SELECT to display the
connected line in the display window.
• Press SP/LP to select the tape speed, SP or LP.
To stop editing
Press the x (stop) buttons on both VCRs.
Tip
• To cut out unwanted scenes while editing, press
• To cut out unwanted scenes while editing, press
X
(pause) on this VCR when an
unwanted scene begins. When it ends, press
X
(pause) again to resume recording.
1
Insert a source tape with its safety tab removed into the other (playback)
VCR. Search for the point to start playback and set it to playback pause.
VCR. Search for the point to start playback and set it to playback pause.
2
Insert a tape with its safety tab in place into this (recording) VCR.
Search for the point to start recording and press X (pause) to set it to
playback pause.
Search for the point to start recording and press X (pause) to set it to
playback pause.
3
Press REC z on this VCR to set it to recording pause.
4
To start editing, press the X (pause) buttons on both VCRs at the same
time.
time.
X
REC z
75
Audio dubbing (SLV-SE830N only)
Editing
Audio dubbing
(SLV-SE830N only)
This feature lets you record over the normal
audio track. The monaural sound previously
recorded is replaced while the original hi-fi
sound remains unchanged. Use this feature
to add commentary to a tape that you have
recorded with a camcorder.
audio track. The monaural sound previously
recorded is replaced while the original hi-fi
sound remains unchanged. Use this feature
to add commentary to a tape that you have
recorded with a camcorder.
Before you start...
• Open the
t
LINE-2 L
o
R jacks cover on the
front panel and connect a playback source.
• Turn on the TV and set it to the video channel.
To stop editing
Press x (stop) on this VCR and the stereo system (or other VCR).
1
Insert a source tape into your stereo system (or the playback VCR).
Search for the point to start playback and set it to playback pause.
Search for the point to start playback and set it to playback pause.
2
Insert a prerecorded tape with its safety tab in place into this (recording)
VCR. Search for the start of the section to be replaced and press
X (pause).
VCR. Search for the start of the section to be replaced and press
X (pause).
The VCR enters pause mode.
3
Press AUDIO DUB.
“A_DUB” and the
indicator appears in the display window.
4
To start editing, press the X (pause) buttons on this VCR and the stereo
system (or other VCR) at the same time.
system (or other VCR) at the same time.
After you use this feature, the audio in playback mode is automatically
set to monaural.
set to monaural.
t LINE-2 L o R
X
AUDIO DUB
1-19
76
Troubleshooting
Additional Information
Troubleshooting
If you have any questions or problems not covered below, please consult your nearest
Sony service facility.
Sony service facility.
Symptom
Remedy
Po
w
e
r
The ?/1 (on/standby)
switch does not function.
switch does not function.
• Connect the mains lead to the mains securely.
The power is turned on
but the VCR does not
operate.
but the VCR does not
operate.
• Moisture condensation has occurred. Turn the power off,
unplug the mains lead and leave the VCR to dry for over
three hours.
three hours.
The VCR is plugged in
but the display window
remains dark.
but the display window
remains dark.
• Set POWER SAVE in the USER SET menu to OFF (see
page 69).
Cloc
k The clock has stopped
and “– –:– –” appears in
the display window.
the display window.
• The clock stops if the VCR is disconnected from the mains.
Reset the clock (and timer).
Pla
y
bac
k
The playback picture
does not appear on the
TV screen.
does not appear on the
TV screen.
• Make sure the TV is set to the video channel. If you are
using a monitor, set it to video input.
• If the VCR is connected to the TV with the Scart cable,
make sure the VIDEO indicator is lit in the display
window. Use the t TV/VIDEO button on the remote
commander to light up the VIDEO indicator.
window. Use the t TV/VIDEO button on the remote
commander to light up the VIDEO indicator.
The picture is not clear.
• Existing broadcasts may interfere with the VCR. Reset the
RF channel output of your VCR (see page 22).
• Adjust the tracking with the PROGRAM +/– buttons on the
VCR.
• The video heads are dirty (see the last page of
Troubleshooting). Clean the video heads using a Sony
video head cleaning cassette. If a Sony cleaning cassette is
not available in your area, have the heads cleaned at your
nearest Sony service facility (a standard service charge will
be required). Do not use a commercially available liquid
type cleaning cassette other than Sony’s, as it may damage
the video heads.
video head cleaning cassette. If a Sony cleaning cassette is
not available in your area, have the heads cleaned at your
nearest Sony service facility (a standard service charge will
be required). Do not use a commercially available liquid
type cleaning cassette other than Sony’s, as it may damage
the video heads.
• The video heads may have to be replaced. Consult your
local Sony service facility for more information.
The picture has no
colour.
colour.
• The COLOUR SYSTEM option in the USER SET menu is
set to the wrong position. Set the option to conform to the
system that the tape was recorded in.
system that the tape was recorded in.
The picture rolls
vertically during picture
search.
vertically during picture
search.
• Adjust the vertical hold control on the TV or monitor.
78
Troubleshooting
Time
r recor
ding
The SHOWVIEW menu
or the TIMER
PROGRAMMING menu
does not appear.
or the TIMER
PROGRAMMING menu
does not appear.
• Check that TIMER METHOD in the EASY OPERATION
menu is set correctly (see page 71).
The VPS/PDC function
does not operate
properly.
does not operate
properly.
• Check that the clock and the date are set correctly.
• Check that the VPS/PDC time you set is the correct one
• Check that the VPS/PDC time you set is the correct one
(there might be a mistake in the TV programme guide). If
the broadcast you wanted to record did not send the good
VPS/PDC information, the VCR will not start recording.
the broadcast you wanted to record did not send the good
VPS/PDC information, the VCR will not start recording.
• If the reception is poor, the VPS/PDC signal might be
altered and the VCR might not start recording.
Canal Plus
You cannot watch Canal
Plus programmes when
the VCR is in standby
mode.
Plus programmes when
the VCR is in standby
mode.
• Check that DEC is set to ON for this channel in the TV
STATION TABLE menu.
• Make sure the Canal Plus Scart cable is plugged securely.
A Canal Plus programme
is always recorded
scrambled.
is always recorded
scrambled.
• Make sure the Canal Plus Scart cable is plugged securely.
• Check that DEC is set to ON for this channel in the TV
• Check that DEC is set to ON for this channel in the TV
STATION TABLE menu.
Oth
er
s
A tape cannot be
inserted.
inserted.
• Check that a tape is not already in the tape compartment.
The remote commander
does not function.
does not function.
• Make sure you are pointing the remote commander at the
remote sensor on the VCR.
• Replace all the batteries in the remote commander with
new ones if they are weak.
• Make sure the [TV] / [VIDEO] remote control switch is set
correctly.
The selected input line
connector number does
not appear in the display
window.
connector number does
not appear in the display
window.
• Press INPUT SELECT to display the connected line.
The tracking meter does
not appear on the TV
screen.
not appear on the TV
screen.
• The recording condition of the tape is very poor and
tracking cannot be adjusted.
You cannot control other
TVs.
TVs.
• Set your TV’s code number. The code number may change
when you replace the batteries of the remote commander.
The display window
becomes dim.
becomes dim.
• The display window automatically becomes dim when the
VCR is in standby or timer recording mode.
The VCR needs to be
cleaned.
cleaned.
• Clean the cabinet, panel and controls with a dry, soft cloth,
or a soft cloth slightly moistened with a mild detergent
solution. Do not use any type of solvent, such as alcohol or
benzine.
solution. Do not use any type of solvent, such as alcohol or
benzine.
Symptom
Remedy
79
Troubleshooting
Ad
ditional Inf
ditional Inf
ormation
Oth
er
s The Line Through
function does not
operate.
operate.
• Set POWER SAVE in the USER SET menu to OFF (see
page 69).
Symptom
Remedy
Symptoms caused by contaminated video heads
• Normal picture
• Rough picture
initial
contamination
contamination
• Unclear picture
• No picture (or
black & white
screen appears)
screen appears)
terminal
77
Troubleshooting
Ad
ditional Inf
ditional Inf
ormation
Pla
y
bac
k
The picture has no
sound.
sound.
• The tape is defective.
• If you made A/V connections, check the audio cable
• If you made A/V connections, check the audio cable
connection.
The sound from a tape
recorded with the VCR is
not in stereo or the
STEREO indicator in the
display window is
flashing.
recorded with the VCR is
not in stereo or the
STEREO indicator in the
display window is
flashing.
• Adjust the tracking.
• The video heads are dirty. Clean the video heads using a
• The video heads are dirty. Clean the video heads using a
Sony video head cleaning cassette as explained above.
Re
cor
ding
No TV programme
appears on the TV
screen.
appears on the TV
screen.
• Make sure the TV is set to the video channel. If you are
using a monitor, set it to video input.
• Existing broadcasts may interfere with the VCR. Reset the
RF channel output of your VCR (see page 22).
• Select the correct source with the INPUT SELECT button.
Select a programme position when recording TV
programmes; select a line input when recording from other
equipment.
programmes; select a line input when recording from other
equipment.
TV reception is poor.
• Make sure the aerial cable is connected securely.
• Adjust the TV aerial.
• Make sure the TV system is correctly set for your TV.
• Make sure TV SYSTEM (B/G or D/K) in the
• Adjust the TV aerial.
• Make sure the TV system is correctly set for your TV.
• Make sure TV SYSTEM (B/G or D/K) in the
INSTALLATION menu is set to the same system in your
local area.
local area.
The tape starts playing as
soon as it is inserted.
soon as it is inserted.
• The safety tab has been removed. To record on this tape,
cover the tab hole (see page 44).
The tape is ejected when
you press z REC.
you press z REC.
• The safety tab has been removed. To record on this tape,
cover the tab hole (see page 44).
Nothing happens when
you press z REC.
you press z REC.
• Make sure the tape is not at its end.
Tim
er rec
or
ding
The timer does not
operate.
operate.
• Check that the clock is set.
• Make sure a tape has been inserted.
• Check that the safety tab has not been removed.
• Make sure the tape is not at its end.
• Make sure a programme has been set for timer recording.
• Make sure your timer settings are past the current time.
• Check that the decoder is turned on.
• Check that the satellite tuner is turned on.
• The clock stops if the VCR is disconnected from the mains.
• Make sure a tape has been inserted.
• Check that the safety tab has not been removed.
• Make sure the tape is not at its end.
• Make sure a programme has been set for timer recording.
• Make sure your timer settings are past the current time.
• Check that the decoder is turned on.
• Check that the satellite tuner is turned on.
• The clock stops if the VCR is disconnected from the mains.
Reset the clock and timer.
• Turn the power off and unplug the mains lead.
Symptom
Remedy
continued
1-20E
82
Index
Index
A
Adjusting
picture
68
tracking
68
Aerial hookup
16
Audio dubbing
75
Audio track
65
Auto Clock Set
21
Auto Set Up
20
C
Canal Plus
36
Changing the programme
position
position
31
Changing the station name
34
Cleaning the video heads
76
Clock setting
24
Colour system
compatible colour systems
2
setting
setting
40
Connecting
the VCR and your TV
16
,
17
to a satellite tuner
to a satellite tuner
19
to a stereo system
19
,
72
to a TV with a Scart
(EURO-AV) connector
(EURO-AV) connector
17
Counter
40
Country selection
21
D
Demonstration
50
Dial Timer
46
Disabling the programme
positions
positions
32
Dubbing. see Editing
E
Editing
72
H
Hi-fi audio track
65
I
Index scan
66
Index search
66
L
Language selection
20
,
27
LP mode
42
M
Manual fine tuning
30
Monaural
64
Monitoring
during playback
64
during recording
64
N
NICAM broadcasts
64
Normal audio track
65
O
Optional setting
70
P
PDC (Programme Delivery
Control)
Control)
53
Playback
39
at various speeds
58
frame-by-frame
58
selecting the sound
64
slow motion
58
Power save
69
Preset download
26
Presetting channels
28
R
Recording
42
bilingual programmes
63
duration time
60
saving
44
stereo programmes
63
timer setting
55
using the Dial Timer
46
using the ShowView
system
system
51
what you are watching on
the TV
the TV
45
while watching another
programme
programme
43
RF channel
20
,
22
S
Safety tab
44
Scart connection
17
Searching
at various speeds
58
using the index function
66
ShowView
recording
51
Smart trilogic
68
SMARTLINK
NexTView Download
18
One Touch Menu
18
One Touch Play
18
,
41
One Touch Timer
18
TV Direct Rec
18
,
45
SP mode
42
Stereo
63
T
Timer setting
55
cancelling
61
changing
61
checking
61
daily/weekly recording
53
,
56
using the Dial Timer
using the Dial Timer
46
using the ShowView
system
system
51
V
VPS (Video Programme
System)
System)
53
W
Wide screen format
70
Z
ZWEITON broadcasts
63
AC68-01981L
Sony Corporation
Quick Start Guide
1 Connecting the VCR
1
... Connect the aerial to of the VCR.
2
... Connect
and the aerial input of your
TV using the supplied aerial cable.
3
... For better picture and sound, connect
LINE-1 (EURO AV) to your TV using a
Scart cable if your TV has a Scart
(EURO-AV) connector.
Scart cable if your TV has a Scart
(EURO-AV) connector.
4
... Connect the mains lead to the mains.
2 Using the Auto Set Up function
1
... Turn on your TV and set it to the video
channel.
If your TV does not have a Scart
(EURO-AV) connector, tune the TV to
channel 32 (the initial RF channel of this
VCR). Refer to your TV’s manual for
TV tuning instructions. If the picture
does not appear clearly, see “To change
the RF channel.”
If your TV does not have a Scart
(EURO-AV) connector, tune the TV to
channel 32 (the initial RF channel of this
VCR). Refer to your TV’s manual for
TV tuning instructions. If the picture
does not appear clearly, see “To change
the RF channel.”
2
... Connect the mains lead to the mains.
3
... Press M/m/</, to select a language,
then press OK.
4
... When the COUNTRY SELECTION
menu appears, press M/m/</, to
select a country, then press OK.
select a country, then press OK.
When all of the receivable channels are
preset, the menu disappears from the TV
screen. You can rearrange the programme
position in any order (see “Changing/
disabling programme positions”).
preset, the menu disappears from the TV
screen. You can rearrange the programme
position in any order (see “Changing/
disabling programme positions”).
3 Setting the clock
1
... Press MENU, then press M/m/</, to
highlight CLOCK SET and press OK.
2
... Press M/m to set the hour, then press ,.
3
... Press M/m to set the minutes. Set the
day, month, and year in sequence by
pressing , to select the item to be set,
and press M/m to select the digits, then
press OK.
pressing , to select the item to be set,
and press M/m to select the digits, then
press OK.
4
... Press MENU.
Now you can operate your VCR.
1
2
3
4
:Signal flow
LINE-1
(EURO AV)
(EURO AV)
Click on the first or last page to see other SLV-SE230B / SLV-SE230D / SLV-SE230G / SLV-SE230I / SLV-SE430K / SLV-SE630B / SLV-SE630D / SLV-SE630E / SLV-SE630N / SLV-SE730B / SLV-SE730D / SLV-SE730E / SLV-SE730G / SLV-SE730I / SLV-SE730N / SLV-SE737E / SLV-SE830B / SLV-SE830D / SLV-SE830E / SLV-SE83 service manuals if exist.