DOWNLOAD Sony SLV-SE210B / SLV-SE210D / SLV-SE210G / SLV-SX110A / SLV-SX110B Service Manual ↓ Size: 6.81 MB | Pages: 51 in PDF or view online for FREE

1) X-Point (Tracking center) adjustment, “Head switching adjustment” and “NVRAM option setting” can be adjusted with remote control.

2) When replacing the Micom (IC601) and NVRAM (IC605 ; EEPROM) be sure to adjust the “Head switching adjustment” and 

“NVRAM option setting”.

3) When replacing the cylinder ass’y, be sure to adjust the “X-Point” and “Head switching adjustment”.

4) How to adjustment.

- Press the “SW718” button on Main PCB to set the adjustment mode.

- If the corresponding adjustment button is pressed, the adjustment is performed automatically.

- If the adjustment is completed, be sure to turn the power off.

Fig. 5-1 

1

2

3

4

5

6

7

8

9

0

X-Point (Tracking Center) Adjustment

("5" Button)

Head Switching Adjustment

("SP/LP" Button)

NVRAM Option Setting

("MENU" Button)

Fig. 5-2 Main PCB (Top View)

5-1

5-2

5-3

Note : Refer to the Mechanical Manual  for the adjustment and confirmation of Ass’y deck.

TP601 (Control Pulse)

TP602 (H’D S/W -Trigger)

TP301 (Envelope)

TP302 (Audio output)

TP303 (Video output)

Fig. 5-3 Location of Test point (Main PCB-Top View)

1) Playback the alignment tape (Color bar).

2) Press the “SW718” button on Main PCB to set the 

adjustment mode. (See Fig. 5-2)

3) Press the “5” button of remote control then adjust-

ment is operated automatically. (See Fig. 5-1)

4) Connect the CH-1 probe to TP301 (Envelope) the 

CH-2 probe to TP602 (H’D switching pulse) and 

then trigger to CH-1.

5) Insert the (-) driver into the X-Point adjustment 

hole and adjust it so that envelope waveform is 

maximum.

6) Turn the Power off.

5-4E

1) Playback the alignment tape.

2) Press the “SW718” button on Main PCB to set the adjustment mode. (See Fig. 5-2 )

3) Press the “SP/LP” button of remote control then adjustment is operated automatically. (See Fig. 5-1)

4) Turn the Power off.

1) Press the “SW718” button on Main PCB to set the adjustment mode. (See Fig. 5-2 )

2) Press the “MENU” button on the remote control about 5 seconds then option setting display is appeared. 

(See Fig.  5-4 and 5-5)

3) Select the option number (See Table 5-1) of corresponding model with “FF/REW/STOP/PAUSE” button on 

the remote control.

4) If selecting the option number is completed, press the “OK (PALY)” button of remote control.

(If “OK (PLAY)” button is pressed, the selected number is changes reversed color. ; See Fig. 5-4)

5) Press the “MENU” button of remote control again to store the option number.

(“PLEASE WAIT” is displayed for a second as shown Fig. 5-5 and this setting is completed.)

6) Turn the Power off.

1) NVRAM Option is adjusted at production line basically. 

2) In case Micom (IC601) and NVRAM (IC605 ; EEPROM) is replaced, be sure to set the corresponding option number of the reqaired 

model. (If the option is not set, the unit is not operated.)

01 

  02   

03   04

   05   

06   07

   

08

09   10   11   12   13   14   15   16
17   18   19   20   21   22   23   24
25   26   27   28   29   30   31   32
33   34   35   36   37   38   39   40
41   42   43   44   45   46   47   48
49   50   51   52   53   54   55   56
57   58   59   60   61   62   63   64
65   66   67   68   69   70   71   72

CNG:OK   SAVE:MENU

Fig. 5-4

01 

  02   

03   04

   05   

06   07

   

08

09   10   11   12   13   14   15   16
17   18   19   20   21   22   23   24
25   26   27   28   29   30   31   32
33   34   35   36   37   38   39   40
41   42   43   44   45   46   47   48
49   50   51   52   53   54   55   56
57   58   59   60   61   62   63   64
65   66   67   68   69   70   71   72

PLEASE  WAIT

Fig. 5-5

<Table 5-1>

SLV-SE210/D1
SLV-SE210/D2

2, 4, 5, 11, 13, 20, 30, 32, 38, 42, 45, 60, 61, 66

SLV-SE210/D3

SLV-SX110/A1
SLV-SX110/A2

13, 20, 30, 32, 38, 42, 45, 60, 61, 66

SLV-SX110/A3

SLV-SE210/B

2, 4, 5, 11, 13, 20, 21, 26, 30, 32, 33, 34, 35, 36, 38, 45, 60, 61, 66

SLV-SX110/B

13, 20, 21, 26, 30, 32, 33, 34, 35, 36, 38, 45, 60, 61, 66

SLV-SE210/G

3, 4, 5, 10, 13, 27, 30, 32, 36, 38, 41, 45, 60, 61, 66

SLV-SX110/K

13, 20, 30, 32, 35, 38, 42, 45, 60, 61, 66

6-1

The assembly No. 100 does not includes LEVER-H/C CLEANER and ASSY-CYLINDER.

104

TM401B

101

100

153

155

1

21

200

CN602S

CN3A1S

S601A

LD601A

S602A

157

Ref. No.

Part No.

Description

Remarks

Ref. No.

Part No.

Description

Remarks

1

3-066-328-01 ASSY-PANEL FRONT (SE210G)

1

3-066-333-01 ASSY-PANEL FRONT (SE210B)

1

3-066-336-01 ASSY-PANEL FRONT (SE210D)

1

3-066-338-01 ASSY-PANEL FRONT (SX110A)

1

3-066-340-01 ASSY-PANEL FRONT (SX110B)

21

3-067-794-01 DOOR-CASSETTE (SX110A/SX110B)

21

3-067-795-01 DOOR-CASSETTE (SE210B/SE210D/SE210G)

100

3-067-778-01 ASSY, MECHA-DECK

101

3-066-329-01 CABINET, TOP (SE210B/SE210D/SE210G)

101

3-066-329-11 CABINET, TOP (SX110A/SX110B)

104

3-066-193-01 FL REINFORCEMENT

153

7-685-661-11 SCREW +BVTP 4X12 TYPE2 NON-SLIT

155

7-685-663-11 SCREW +BVTP 4X16 TYPE2 NON-SLIT

157

7-685-548-19 SCREW +BTP 3X12 TYPE2 NON-SLIT

0 200

1-823-023-11 POWER-CORD 

(SE210B/SE210D/SX110A/SX110B)

0 200

1-823-025-11 POWER-CORD (SE210G)

CN3A1S 1-823-022-11 CABLE-FLAT 6P

CN602S 1-823-164-11 CABLE-FLAT 7P
LD601A 3-067-777-01 HOLDER-LED
S601A

3-067-776-01 HOLDER-SENSOR

S602A

3-067-776-01 HOLDER-SENSOR

TM401B 3-066-699-11 CONNECTOR BOARD-ASSY (SE210B/SE210D)

TM401B 3-066-699-01 CONNECTOR BOARD-ASSY 

(SE210G/SX110A/SX110B)

• -XX, -X mean standardized parts, so they

may have some differences from the original
one.

• Items marked "*" are not stocked since they

are seldom required for routine service.
Some delay should be anticipated when
ordering these items.

• The mechanical parts with no reference

number in the exploded views are not
supplied.

Note:
The components identified by matk 

!

or

dotted line with mark 

!

are critical for safety.

Replace only with part number specified

The components identified by matk 

!

or dotted line with

mark 

!

are critical for safety.

Replace only with part number specified