DOWNLOAD Sony SLV-L45AR / SLV-L65HFAR / SLV-L75HFAR Service Manual ↓ Size: 8.49 MB | Pages: 87 in PDF or view online for FREE

Model
SLV-L45AR SLV-L65HFAR SLV-L75HFAR
Pages
87
Size
8.49 MB
Type
PDF
Document
Service Manual
Brand
Device
VCR
File
slv-l45ar-slv-l65hfar-slv-l75hfar.pdf
Date

Sony SLV-L45AR / SLV-L65HFAR / SLV-L75HFAR Service Manual ▷ View online

MICROFILM
SLV-L45AR/L65HFAR/L75HFAR
RMT-V241/V242V
SERVICE
 
MANUAL
  J  VIDEO CASSETTE RECORDER
Photo : SLV-L75HFAR
Argentina Model
SPECIFICATIONS
N-PAL NTSC
Sistema
Formato
VHS PAL-N/NTSC estándar
Cobertura de canales
VHF 2 a 13
UHF 14 a 69
CATV A-8 a A-1, A a W,
W+1 a W+84
Antena
Terminal de antena de 75 ohmios para VHF/UHF
Entradas/salidas
LINE IN  (SLV-L65HFAR)
LINE IN y LINE IN 2 (SLV-L45AR/L75HFAR)
VIDEO IN
Toma fonográfica (1) (SLV-L65HFAR)
Tomas fonográficas (1 por cada) (SLV-L45AR/L75HFAR)
Señal de entrada : 1 Vp-p, 75 ohmios,
desequilibrada, sincronización negativa
AUDIO IN
Tomas fonográficas (2, L/R) (SLV-L65HFAR)
Tomas fonográficas (1 por cada) (SLV-L45AR)
Tomas fonográficas (2 por cada, L/R) (SLV-L75HFAR)
Nivel de entrada : 327 m Vrms,
Impedancia de entrada : superior a
47 kiloohmios
LINE OUT
VIDEO OUT
Toma fonográfica (1)
Señal de Salida : 1 Vp-p, 75 ohmios,
desequilibrada, sincronización negativa
AUDIO OUT
Tomas fonográficas (2, L/R) (SLV-L65HFAR/L75HFAR)
Toma fonográfica (1) (SLV-L45AR)
Salida estándar : 327 m Vrms,
Impedancia de carga : 47 kiloohmios
Impedancia de salida : inferior a
10 kiloohmios
General
Requisitos de alimentación
220 a 240 V CA, 50Hz
Consumo de energía
18 W
Temperatura de funcionamiento
5˚C a 40˚C
Temperatura de almacenamiento
-20˚C a 60˚C
Dimensiones
Aprox. 360 x 97 x 298 mm (an /al / fn)
incluidas las piezas y controles
sobresalientes
Masa
Aprox. 3,7 kg
Accesorios suministrados
Control remoto (1)
Pilas tipo R6 (tamaño AA) (2)
Cable de antena (1)
Cable de audio / video (1)
(sólo el modelo SLV-L65HFAR/L75HFAR)
Cable de alimentación de CA (1)
Diseño y especificaciones sujetos a modificaciones sin previo aviso.
Ver 1.0  1998.07
– 2 –
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety check before releasing the set to the customer :
4. Look for parts which, though functioning, show obvious
signs of deterioration. Point them out to the customer and
recommend their replacement.
5. Check the B+ voltage to see it is at the values specified.
1. Check the area of your repair for unsoldered or poorly-sol-
dered connections. Check the entire board surface for sol-
der splashes and bridges.
2. Check the interboard wiring to ensure that no wires are
“pinched” or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly tran-
sistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 
!
 OR DOTTED
LINE WITH MARK 
!
 ON THE SCHEMATIC DIAGRAMS AND
IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÈCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 
!
 SUR
LES DIAGRAMMES SCHÉMATIQUES ET LA LISTEDES
PIÉCES SONT CRITIQUES POUR LA SÉCURITÉ DE
FONCTIONNEMENT.
NE REMPLACER CES COMPOSANTS QUE PAR DES
PIÉCES SONY DONT LES
NUMÉROS SONT DONNÉS DANS CE MANUEL OUDANS
LES SUPPLÉMENTS PUBLIÉS PAR SONY.
– 3 –
1. GENERAL
Paso 1 Conexiones ........................................................ 1-1
Paso 2 Configuración de la videograbadora .................. 1-2
Paso 3 Ajuste del reloj ................................................... 1-3
Selección del idioma ..................................................... 1-3
Instrucciones adicionales de sintonización ................... 1-3
Reproducción de cintas ................................................. 1-4
Grabación de programas de televisión .......................... 1-4
Grabación de programas de televisión con
temporizador ................................................................. 1-5
Grabación de programas de televisión mediante la
función VCR Plus + ...................................................... 1-6
Reproducción/búsqueda a distintas velocidades ........... 1-6
Grabación de programas de televisión con el
temporizador instantáneo .............................................. 1-6
Comprobación/cancelación de ajustes del
temporizador ................................................................. 1-7
Búsquedas con la función de índice .............................. 1-7
Grabación de programas estéreo y bilingües ................ 1-7
Edición con otra videograbadora .................................. 1-7
Ajuste de la imagen ....................................................... 1-8E
Indice visual .................................................................. 1-8E
2. DISASSEMBLY
1-1. Removal of Cabinet, Mechanism Unit and Main
Board ..................................................................... 2-1
Removing the Cabinet Parts .................................. 2-1
Removing the Mechanism Main Unit and the
CP-1 PWB Assembly ............................................. 2-1
l-2. Temporarily Setting Up and Connecting
CP-1 PWB Assembly ............................................. 2-3E
1-3. Installation of the Front Panel ................................ 2-3E
3. DIAGRAMS
Circuit Boards Location ................................................ 3-1
Mechanism Connection Diagram .................................. 3-2
Overall wiring Diagram (SLV-L45AR) ......................... 3-3
Overall wiring Diagram (SLV-L65HFAR/L75HFAR) ... 3-5
System Control  & Servo Circuit Diagram
(SLV-L45AR) ................................................................ 3-7
System Control  & Servo Circuit Diagram
(SLV-L65HFAR/L75HFAR) ......................................... 3-9
Audio & Video Circuit Diagram (SLV-L45AR) ........... 3-11
Video & Audio Circuit Diagram
(SLV-L65HFAR/L75HFAR) ......................................... 3-13
4. SCHEMATIC DIAGRAMS AND PRINTED
    WIRING BOARDS
CP-1 Board (PW-A) Power Supply Circuit Diagram ... 4-1
CP-1 Board (VA-A) Video, Audio & Tuner
Circuit Diagram (SLV-L45AR) ..................................... 4-3
CP-1 Board (VA-A) Video, Audio & Tuner
Circuit Diagram (SLV-L65HFAR/L75HFAR) .............. 4-5
Video Circuit Waveforms .............................................. 4-7
VP-1 Board Video Pre-Amp circuit Diagram
(SLV-L45AR) ................................................................ 4-8
VP-1 Board Video Pre-Amp circuit Diagram
(SLV-L65HFAR/L75HFAR) ......................................... 4-9
A7101 Display (FLD) Grid/Anode Assignment
Drawing & Table ........................................................... 4-11
TM-1, 2 Boards Operation Key, Display & Timer
Circuit Diagram (SLV-L45AR) ..................................... 4-11
TM-1, 2 Boards Operation Key, Display & Timer
Circuit Diagram (SLV-L65HFAR/L75HFAR) .............. 4-13
TABLE OF CONTENTS
Section Title Page
______ ____ ____
Section Title Page
______ ____ ____
Servo Circuit Waveforms .............................................. 4-15
IC 301 System Control & Tuning Control MPU Pin
Functions Table ............................................................. 4-16
CP-1 Board (SY-A) System Control & Servo
Circuit Diagram (SLV-L45AR) ..................................... 4-17
CP-1 Board (SY-A) System Control & Servo
Circuit Diagram (SLV-L65HFAR/L75HFAR) .............. 4-19
5. ADJUSTMENTS
1. Maintaining and Checking the Mechanism ............... 5-1
l -1.  Regular Checks and Maintenance Items ............... 5-1
  1-1-1.  Regular Checks ................................................ 5-1
  1-1-2. Cleaning ............................................................ 5-1
1-2 Service Tools ........................................................... 5-2
  1-2-1.  Service Tools ................................................... 5-2
  1-2-2. Using the Relay Cable (J-6090-057-A) ............ 5-3
2. An Overview of the Mechanism ................................ 5-3
2-1. Names of the Main Parts ........................................ 5-3
  2-1-1. Cassette Mechanism Assembly ........................ 5-3
  2-1-2. Top  View .......................................................... 5-4
  2-1-3. Under Side ........................................................ 5-4
2-2. An Overview of the Mechanism Modes ................ 5-5
  2-2-1. Mechanism Mode Switching Table .................. 5-5
  2-2-2. Movement Check List for the Main Parts of the
     Mechanism ........................................................ 5-6
  2-2-3. How to Check the Mechanism
     Mode Position ................................................... 5-6
  2-2-4. Self-Diagnosis Display ..................................... 5-6
3. Disassembling the Main Parts of the Mechanism ..... 5-7
3-1. How to Make the Mechanism Move ...................... 5-7
  3-1-1. How to Operate the Loading Motor Using
      A DC Voltage Supply ....................................... 5-7
  3-1-2. Operating the Loading Motor
     by the Manual Method ...................................... 5-7
  3-1-3. Making the Mechanism Move
     Using the Manual Method ................................ 5-7
3-2. Mechanism Unit ..................................................... 5-8
3-3. Cassette Drive Mechanism .................................... 5-8
  3-3-1. Cassette Mechanism Assembly ........................ 5-8
  3-3-2. Cassette Drive Gear .......................................... 5-9
  3-3-3. Door opener, Under Frame and Stand L ........... 5-9
  3-3-4. Start Rack Gear and Front Rack Gear .............. 5-10
3-4. Cleaner Roller Assembly ....................................... 5-10
3-5. Cylinder (DRUM) .................................................. 5-11
  3-5-1. Cylinder Motor (ROTOR and STATOR) ......... 5-11
  3-5-2. Cylinder Assembly ........................................... 5-11
3-6. FE Head and ACE Head ........................................ 5-12
  3-6-1. Audio R/P Head Assembly (ACE HEAD) ....... 5-12
  3-6-2. Full Erase Head ................................................ 5-12
3-7. Capstan Motor ........................................................ 5-13
  3-7-1. Capstan Motor .................................................. 5-13
  3-7-2. Capstan Brake Assembly .................................. 5-13
3-8. Loading Motor Assembly and
Worm Gear Assembly ............................................ 5-14
3-9. Pinch Roller Pressure Mechanism ......................... 5-14
  3-9-1. Pinch Roller Lever Assembly ........................... 5-14
  3-9-2. Pinch Lift Cam and Pinch Cam Gear ............... 5-15
3-10. L Guide Lever Assembly and
  Load Lever Assembly .......................................... 5-16
3-11. BT Lever Assembly ............................................. 5-16
3-12. Reel Drive Mechanism ........................................ 5-17
  3-12-1. Reel Belt, Reel Pulley, Friction Gear
       Assembly and Clutch Change Lever .............. 5-17
  3-12-2. Clutch Mounting Assembly ............................ 5-17
– 4 –
Section
Title
Page
______
____
____
  3-12-3. S Soft Lever, Supply Reel Assembly
       and S Reel Gear .............................................. 5-17
  3-12-4. T Soft Brake Assembly, Take Up Reel
       Assembly, T Reel Gear ................................... 5-18
3-13. Brakes .................................................................. 5-18
  3-13-1. S Brake Assembly, T Brake
       Assembly, T Brake ACT Slide ........................ 5-18
  3-13-2. Brake Control Lever and Brake ACT Lever
       Assembly ........................................................ 5-19
  3-13-3. S Brake ACT Slide and BT Spring Lever
       Assembly ........................................................ 5-19
3-14. Guides .................................................................. 5-20
  3-14-1. Guide Roller Assembly ................................... 5-20
  3-14-2. S and T Incline Mounting Assemblies ............ 5-20
3-15. Wheel Gear 2, Main Cam and Mode Switch ....... 5-21
3-16. Crescent Slide ...................................................... 5-22
3-17. S Load Gear, T Load Gear, S Load Lever
  Assembly and T Load Lever Assembly ............... 5-23
3-18. Tape Sensors, Reel Sensor and EP SW Lever ..... 5-24
  3-18-1. Tape Top Sensor and Tape End Sensor ........... 5-24
  3-18-2. Reel Sensor ..................................................... 5-24
  3-18-3. EP Switch Lever ............................................. 5-24
4. Mechanism Checks and Adjustments ........................ 5-25
4-1. Reel Table Torque Check ....................................... 5-25
4-2. Adjusting the BT Lever Assembly Position and
Checking the Back Tension Torque in Play Mode ..... 5-25
  4-2-1. BT Lever Pole Position Adjustment ................. 5-25
  4-2-2. Checking the Back Tension Torque
     Play Mode ......................................................... 5-25
4-3. Tape Path Adjustment ............................................ 5-26
  4-3-1. Adjustment Procedure ...................................... 5-26
  4-3-2. Load Lever Assembly Height Adjustment ....... 5-26
  4-3-3. Guide Roller Height Adjustment ...................... 5-27
  4-3-4. Audio R/P Head (ACE HEAD) Height
     Adjustment, Azimuth Adjustment and
     Horizontal Position Adjustment ........................ 5-28
  4-3-5. Checking After Adjustment .............................. 5-29E
6. ELECTRICAL ADJUSTMENTS
Circuit Boards Location ................................................ 6-1
Self -Diagnosis Display ................................................. 6-2
1. Self-Diagnosis Contents and Mechanism Mode
    Display ...................................................................... 6-2
2. Electrical Adjustment ................................................ 6-4
2-1. Servo Circuit Adjustment ....................................... 6-4
  2-1-1. Test Equipment and Standards Required .......... 6-4
  2-1-2. Location of Adjustment Points ......................... 6-4
  2-1-3. Switching Position Adjustment ........................ 6-5
  2-1-4. SP STIL V-LOCK Adjustment ......................... 6-5
2-2. Video Circuit Relay Jig .......................................... 6-6
  2-2-1. Test Equipment and Standards Required .......... 6-6
2-3. MTS Decoder Circuit Adjustment
(SLV-L65HFAR/L75HFAR only) .......................... 6-7
  2-3-1. Test Equipment and Standards Required .......... 6-7
  2-3-2. Location of Adjustment Points ......................... 6-7
  2-3-3. Stereo/SAP Filter Adjustment .......................... 6-8
  2-3-4. Stereo VCO Adjustment ................................... 6-8
  2-3-5. Input Level Adjustment .................................... 6-8
  2-3-6. Separation Adjustment ...................................... 6-8
  2-3-7. Audio Output Mode and Output Signal Check ... 6-9
2-4. IF Circuit Adjustment ............................................ 6-10E
  2-4-1. Test Equipment and Standard Required ........... 6-10E
  2-4-2. Location of Adjustment Point ........................... 6-10E
  2-4-3. RF AGC  Adjustment ........................................ 6-10E
3. Test Points for Tape Path Adjustment ....................... 6-10E
7. EXPLODED VIEWS
7-1. Cabinet & Chassis Parts ......................................... 7-1
7-2. Mechanism Parts-1 ................................................ 7-2
7-3. Mechanism Parts-2 ................................................ 7-4E
8. ELECTRICAL PARTS LIST
................................. 8-1
Hardware List ................................................................ 8-9E
Section
Title
Page
______
____
____
Page of 87
Display

Sony SLV-L45AR / SLV-L65HFAR / SLV-L75HFAR Service Manual ▷ Download

  • DOWNLOAD Sony SLV-L45AR / SLV-L65HFAR / SLV-L75HFAR Service Manual ↓ Size: 8.49 MB | Pages: 87 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony SLV-L45AR / SLV-L65HFAR / SLV-L75HFAR in PDF for free, which will help you to disassemble, recover, fix and repair Sony SLV-L45AR / SLV-L65HFAR / SLV-L75HFAR VCR. Information contained in Sony SLV-L45AR / SLV-L65HFAR / SLV-L75HFAR Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.