DOWNLOAD Sony SLV-ED22KR / SLV-ED22PL / SLV-ED22TW / SLV-ED55KR / SLV-ED55PL / SLV-ED88TW / SLV-ED99KR / SLV-ED99PL / SLV-ED99TW Service Manual ↓ Size: 16.1 MB | Pages: 75 in PDF or view online for FREE

Model
SLV-ED22KR SLV-ED22PL SLV-ED22TW SLV-ED55KR SLV-ED55PL SLV-ED88TW SLV-ED99KR SLV-ED99PL SLV-ED99TW
Pages
75
Size
16.1 MB
Type
PDF
Document
Service Manual
Brand
Device
VCR
File
slv-ed22kr-slv-ed22pl-slv-ed22tw-slv-ed55kr-slv-ed.pdf
Date

Sony SLV-ED22KR / SLV-ED22PL / SLV-ED22TW / SLV-ED55KR / SLV-ED55PL / SLV-ED88TW / SLV-ED99KR / SLV-ED99PL / SLV-ED99TW Service Manual ▷ View online

1-3
Getting Started
12
4
Set the year, hour and minutes in
sequence, using / to flash the item to be
set, and >/. to select the digits.
5
Press OK to start the clock.
Tip
• To change the digits during setting, press 
< to return to the item to be changed,
and select the digits using >/..
Note
• The menu disappears automatically if you don’t proceed for more than a few
minutes.
PLAY
OK
PLAY
OK
AM
CLOCK SET
1 1 / 1
/ 2 0 0 0 THU
12 : 3 0
6
SET
SELECT
: [
]
END
: [ OK ]
: [
]
Step 4: Setting the clock (continued)
13
Getting Started
Getting Started
SP
APC
Step 5
Press and hold ONE TOUCH TUNING on the VCR for more than
three seconds.
The VCR starts presetting the channels.
The WAIT indicator goes off when all receivable channels are preset.
To check if the channels are preset correctly
Set the TV to the video channel and press CHANNEL +/– on the VCR.
If the TV screen changes to a different program each time you press
CHANNEL +/–, the channels are preset correctly.
Tip
• To stop the One Touch Tuning function, press ONE TOUCH TUNING or 
p STOP
on the VCR during the setting.
ONE TOUCH
TUNING
Presetting channels
First, we recommend that you preset the receivable channels in your area
using the One Touch Tuning function or the AUTO PRESET in the TUNER
PRESET menu. Then, if some channels could not be preset automatically, set
them manually; if there are any unwanted channels among the preset ones,
you can disable the channels.
Presetting all receivable
channels using the One
Touch Tuning function
CHANNEL +/–
ONE TOUCH
TUNING
continued
Getting Started
14
Step 5: Presetting channels (continued)
Presetting all receivable
channels automatically
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the VCR channel
(channel 3 or 4). If your TV is
connected to the VCR using A/V
connections, set the TV to video input.
• Press TV/VIDEO to display the
VIDEO indicator in the VCR’s display
window.
1
Press MENU, then press 
M/m to move the
cursor (
B) to TUNER PRESET, then press
OK.
2
Press 
M/m to select ANTENNA/CABLE.
MENU
OK
M/m/</,
MENU  
PLAY
OK
TUNER PRESET
1
CH
ANTENNA / CABLE
AUTO PRESET
MANUAL SET
AFT
SET
SELECT
FINE TUNING
ANT
ADD
ON

CABLE
ERASE
OFF
: [
]
: [
]
PLAY
OK
15
Getting Started
Getting Started
3
• To preset cable TV channels:
Press 
</, to set ANTENNA/CABLE
to CABLE.
• To preset VHF and UHF channels:
Press 
</, to set ANTENNA/CABLE
to ANT.
4
Press 
M/m to move the cursor (B) to
AUTO PRESET, then press OK.
All receivable channels are preset in
numerical sequence. When no more
receivable channels can be found,
presetting stops and the picture from the
lowest numbered channel is displayed on
the TV screen.
TUNER PRESET
2
CH
ANTENNA / CABLE
AUTO PRESET
MANUAL SET
AFT
SET
SELECT
FINE TUNING
ANT
ADD
ON

CABLE
ERASE
OFF
: [
]
: [
]
TUNER PRESET
2
CH
ANTENNA / CABLE
AUTO PRESET
MANUAL SET
AFT
ANT
ADD
ON

CABLE
ERASE
OFF
PLEASE WAIT
FINE TUNING
PLAY
OK
PLAY
OK
PLAY
OK
TUNER PRESET
1
CH
ANTENNA / CABLE
AUTO PRESET
MANUAL SET
AFT
SET
SELECT
FINE TUNING
ANT
ADD
ON

CABLE
ERASE
OFF
: [
]
: [
]
continued
1-4
Getting Started
16
Step 5: Presetting channels (continued)
Presetting/disabling
channels manually
1
Press MENU, then press 
M/m to move the
cursor (
B) to TUNER PRESET, then press
OK.
CH +/–
MENU
OK
M/m/</,
Number
buttons,
ENTER
1
2
3
4
5
6
7
8
9
0
MENU  
PLAY
OK
TUNER PRESET
1
CH
ANTENNA / CABLE
AUTO PRESET
MANUAL SET
AFT
SET
SELECT
FINE TUNING
ANT
ADD
ON

CABLE
ERASE
OFF
: [
]
: [
]
17
Getting Started
Getting Started
2
• To preset a channel:
Press the number buttons to enter the
channel number, then press ENTER.
Press 
</, to set MANUAL SET to
ADD.
• To disable a channel:
Press CH +/– to select the channel
number.
Press 
</, to set MANUAL SET to
ERASE.
3
Repeat step 2 to preset or disable channels as required, then press
OK.
1
2
3
4
5
6
7
8
9
0
TUNER PRESET
5
CH
ANTENNA / CABLE
AUTO PRESET
MANUAL SET
AFT
SET
SELECT
FINE TUNING
ANT
ADD
ON

CABLE
ERASE
OFF
: [
]
: [
]
Channel to be preset
Channel to be disabled
PLAY
OK
TUNER PRESET
5
CH
ANTENNA / CABLE
AUTO PRESET
MANUAL SET
AFT
SET
SELECT
FINE TUNING
ANT
ADD
ON
CABLE
ERASE
OFF
: [
]
: [
]
• CH
continued
Getting Started
18
Step 5: Presetting channels (continued)
If the picture is not clear
Normally, the Auto Fine Tuning (AFT)
function automatically tunes in channels
clearly.  If, however, the picture of a
channel is not clear, you can also use the
manual tuning function.
MENU
OK
M/m/</,
Number
buttons,
ENTER
Selected channel
1
Press MENU, then press 
M/m to move the
cursor (
B) to TUNER PRESET, then press
OK.
2
Press the number buttons to select the
channel you want to fine-tune, then press
ENTER.
1
2
3
4
5
6
7
8
9
0
MENU  
PLAY
OK
TUNER PRESET
1
CH
ANTENNA / CABLE
AUTO PRESET
MANUAL SET
AFT
SET
SELECT
FINE TUNING
ANT
ADD
ON

CABLE
ERASE
OFF
: [
]
: [
]
1
2
3
4
5
6
7
8
9
0
TUNER PRESET
5
CH
ANTENNA / CABLE
AUTO PRESET
MANUAL SET
AFT
SET
SELECT
FINE TUNING
ANT
ADD
ON

CABLE
ERASE
OFF
: [
]
: [
]
19
Getting Started
Getting Started
3
Press 
M/m to select FINE TUNING.
The fine tuning meter appears.
4
Press 
</, to adjust to a clearer picture,
then press OK.
Note that the AFT setting switches to OFF.
Tip
• To select the channel in step 2 above, you can also use the CH +/– buttons. In this
case, you don’t need to press ENTER.
Notes
• The menu disappears automatically if you don’t proceed for more than a few
minutes.
• When adjusting FINE TUNING, the menu may become difficult to read due to
interference from the picture being received.
PLAY
OK
PLAY
OK
TUNER PRESET
5
CH
ANTENNA / CABLE
AUTO PRESET
MANUAL SET
AFT
SET
FINE TUNING
ANT
ADD
ON

CABLE
ERASE
OFF
: [
]
TUNER PRESET
5
CH
ANTENNA / CABLE
AUTO PRESET
MANUAL SET
AFT
SET
FINE TUNING
ANT
ADD
ON
CABLE
ERASE
OFF
: [
]
1-5
Basic Operations
20
Basic Operations
Playing a tape
Z EJECT
CLEAR
DISPLAY
H PLAY
M # FF
x STOP
m 3 REW
X PAUSE
1
Turn on your TV and set it to the video channel.
2
Insert a tape.
The VCR turns on and starts playing
automatically if you insert a tape with its
safety tab removed.
TRINITRON TV
SYNCHRO PLAY
x STOP
H PLAY
M # FF
m 3 REW
A EJECT
X PAUSE
1
2
3
4
5
6
7
8
9
0
21
Basic Operations
Basic Operations
3
Press 
H PLAY.
When the tape reaches the end, it will rewind automatically.
Additional tasks
To
Stop play
Pause play
Resume play after pause
Fast-forward the tape
Rewind the tape
Eject the tape
Press
x STOP
X PAUSE
X PAUSE or H PLAY
M # FF during stop
m 3 REW during stop
Z EJECT
PLAY
OK
To use the time counter
At the point on the tape that you want to find later, press CLEAR. The
counter in the display window resets to “0:00:00.” Search for the point
afterwards by referring to the counter.
To display the counter on the TV screen, press DISPLAY.
Notes
• Tapes recorded in the LP mode on other VCRs can be played back on this VCR but
the picture quality cannot be guaranteed.
• While setting the menu on the TV screen, you cannot use the 
H PLAY, X PAUSE,
M # FF, m 3 REW, or x STOP buttons.
• The counter resets to “0:00:00” whenever a tape is reinserted.
• The counter stops counting when it comes to a portion with no recording.
EP
VIDEO
APC
continued
Basic Operations
22
Turning on the VCR and TV, and starting playback
automatically (Trinitron TV Synchro Play)
You can only use this function if your TV is made by Sony (Trinitron TV).
How to connect to use this function
Connect the VCR and TV with the audio/video cable (see “Audio/video
(A/V) hookup” on page 7 or 8.)  Be sure to connect the audio/video cable to
the VIDEO IN 1 jacks on the TV if the TV has two inputs or more.  The TV
must be placed where it will respond to the remote commander while you
are pointing it at the VCR.
Operation
Make sure that the TV’s main power is on.
Press TRINITRON TV SYNCHRO PLAY and hold the remote commander in
place for about two seconds.
The VCR and TV turn on, and the TV is set to VCR reception.  If there is a
tape in the VCR, playback starts automatically.
Notes
• If the Trinitron TV Synchro Play function does not work properly:
– Wait a few moments, and press the button again.
– Replace both of the batteries with new ones, and press the button again.
Note that this function may not operate some Sony TVs because of the remote
commander’s signal limitations.
• Do not press TRINITRON TV SYNCHRO PLAY while playing back a video tape.  If
you do so, the TV’s input source will momentarily switch to the TV’s tuner.
Playing a tape (continued)
23
Basic Operations
Basic Operations
Recording TV
programs
1
Turn on your TV and set it to the video channel.
2
Insert a tape with its safety tab in place.
z REC
x STOP
DISPLAY
INPUT SELECT
CH +/–
TV/VIDEO
SP/EP
1
2
3
4
5
6
7
8
9
0
continued
1-6
Basic Operations
24
Recording TV programs (continued)
3
Press INPUT SELECT until a channel number appears in the display
window.
4
Press CH +/– to select the channel you want to record.
5
Press SP/EP to select the tape speed, SP or EP.
EP (Extended Play) provides recording time three times as long as
SP (Standard Play). However, SP produces better picture and audio
quality.
6
Press 
z REC to start recording.
The recording indicator lights up red in the display window.
To stop recording
Press 
x STOP.
INPUT
SELECT
EP
VIDEO
APC
SP
VIDEO
APC
SP
VIDEO
APC
Recording indicator
• CH
SP / EP
REC
EP
VIDEO
APC
25
Basic Operations
Basic Operations
To check the remaining tape length
Press DISPLAY. The white bar indicates the approximate length of tape
remaining.
To watch another TV program while recording
1
Press TV/VIDEO to turn off the VIDEO indicator in the display
window.
2
If the TV is connected to the VCR’s LINE-1 OUT jacks, set the TV to TV
input; if not, skip this step.
3
Select another channel on the TV.
To save a recording
To prevent accidental erasure, break off the
safety tab as illustrated. To record on the tape
again, cover the tab hole with adhesive tape.
Safety tab
Tips
• To select a channel, you can use the number buttons on the remote commander.
Enter the channel number, then press ENTER.
• (SLV-ED99PL and ED55PL)
You can select a video source from the LINE-1 IN or LINE-2 IN jacks using INPUT
SELECT or CH +/– buttons.
• (SLV-ED22PL)
You can select a video source from the LINE-1 IN jack using INPUT SELECT or CH
+/– buttons.
• The display appears on the TV screen indicating information about the tape, but the
information won’t be recorded on the tape.
• If you don’t want to watch TV while recording, you can turn off the TV.
Notes
• The display doesn’t appear during still (pause) mode or slow-motion playback.
• It may take up to one minute for the VCR to calculate and display the remaining
tape length after you press DISPLAY.
Time counter
Remaining tape length
S
E
:
: 2
2
0 0
0
Basic Operations
26
Recording TV
programs using
the Easy Timer
function
The Easy Timer function allows you to
make a timer recording of a program
without turning on your TV. Set the
recording timer to record only one
program that will be broadcast within
the next 24 hours using the EASY
TIMER knob. If the VCR clock has not
been set, you can also set the clock
before setting the timer recording.
Setting the Easy Timer
Before you start…
• Insert a tape with its safety tab in
place. Make sure the tape is longer
than the total recording time.
EASY TIMER
knob
SP/EP
CHANNEL +/–
EASY TIMER
1
Press the EASY TIMER knob.
The START indicator appears in the display window.
If the clock has not been set,
“–:– –” appears. Go to step 2
in “Setting or changing the
Easy Clock” on page 28.
CH +/–
SP/EP
EASY
TIMER
ENTER (AM/PM)
1
2
3
4
5
6
7
8
9
0
SP
APC
START
AM
27
Basic Operations
Basic Operations
2
Set the recording start time by turning the EASY TIMER knob
clockwise or counterclockwise to increase or decrease the time by 15
minutes.
To increase or decrease the
time by one minute, press
CHANNEL +/–.
Press ENTER (AM/PM) to
change AM and PM.
3
Press  the EASY TIMER knob to confirm the start time setting.
The STOP indicator appears.
4
Set the recording stop time in the same way as in step 2, then press
the EASY TIMER knob.
A channel number flashes.
5
Turn the EASY TIMER knob clockwise or counterclockwise to select
the channel you want to record.
To select the tape speed, press
SP/EP.
6
Press the EASY TIMER knob to confirm the setting.
The 
t indicator appears in
the display window and the
VCR stands by for recording.
EASY TIMER
SP
APC
START
AM
EASY TIMER
EASY TIMER
EASY TIMER
SP
APC
STOP
PM
SP
APC
SP/
EP
EP
APC
SP
EASY TIMER
AM
continued
Page of 75
Display

Click on the first or last page to see other SLV-ED22KR / SLV-ED22PL / SLV-ED22TW / SLV-ED55KR / SLV-ED55PL / SLV-ED88TW / SLV-ED99KR / SLV-ED99PL / SLV-ED99TW service manuals if exist.