DOWNLOAD Sony SLV-ED225PS / SLV-ED323ME / SLV-ED323SG / SLV-ED825PS / SLV-ED828ME / SLV-ED828SG / SLV-ED925PS / SLV-ED929MI / SLV-EZ121AZ / SLV-EZ424AZ / SLV-EZ725AZ / SLV-EZ727AZ Service Manual ↓ Size: 14.07 MB | Pages: 65 in PDF or view online for FREE

5-6E

SLV-EZ121AZ

10, 12, 25, 26, 27, 33, 35, 36, 39, 42, 45, 47, 50, 53, 60, 61, 63, 64, 69, 72

SLV-ED225PS

10, 12, 20, 22, 25, 27, 35, 39, 42, 45, 47, 50, 53, 60, 61, 63, 64, 69, 72

SLV-ED323SG

10, 12, 20, 22, 25, 27, 35, 39, 42, 45, 47, 50, 60, 61, 63, 64, 69, 72

SLV-ED323ME

10, 12, 20, 22, 25, 27, 35, 39, 42, 45, 47, 50, 60, 61, 63, 64, 69, 72

SLV-EZ424AZ

1, 9, 10, 12, 25, 26, 27, 33, 35, 36, 39, 42, 45, 47, 50, 53, 60, 61, 63, 64, 67, 69, 72

SLV-ED825PS

6, 9, 10, 12, 20, 22, 25, 27, 35, 39, 42, 45, 47, 49, 51, 53, 60, 61, 63, 64, 69, 72

SLV-ED828SG

6, 9, 10, 12, 15, 20, 22, 25, 27, 35, 39, 42, 45, 47, 49, 51, 60, 61, 63, 64, 69, 72

SLV-ED828ME

6, 9, 10, 12, 15, 20, 22, 25, 27, 35, 39, 42, 45, 47, 49, 51, 53, 60, 61, 63, 64, 69, 72

SLV-EZ725AZ

6, 7, 8, 9, 10, 12, 15, 25, 26, 27, 33, 35, 36, 39, 42, 45, 47, 49, 51, 53, 60, 61, 63, 64, 69, 72

SLV-EZ727AZ

1, 6, 7, 8, 9, 10, 12, 15, 22, 25, 26, 27, 33, 35, 36, 39, 42, 45, 47, 49, 51, 53, 60, 61, 63, 64, 67, 69, 72

SLV-ED925PS

6, 7, 8, 9, 10, 12, 15, 20, 22, 25, 27, 35, 39, 42, 45, 47, 49, 51, 53, 60, 61, 63, 64, 69, 72

SLV-ED929MI

1, 6, 7, 8, 9, 10, 12, 15, 20, 22, 25, 28, 35, 36, 39, 42, 45, 47, 49, 51, 53, 60, 61, 63, 64, 69, 72

 1) NVRAM Option is adjusted at production line basically.

 2) In case Micom (IC601) and NVRAM (IC605 ; EEPROM) is replaced, be sure to set the corresponding option number of the reqaired

     model. (If the option is not set, the unit is not operated.)

1) Playback the alignment tape.
2) Press the “TEST” button on Main PCB/Function PCB to set the adjustment mode. (See Fig. 5-2, 5-3 and 5-4)
3) Press the “SP/LP” button of remote control then adjustment is operated automatically. (See Fig. 5-1)
4) Turn the Power off.

Fig. 5-6

Fig. 5-7

<Table 5-1>

01 

  02   

03   04

   05   

06   07

   

08

09   10   11   12   13   14   15   16
17   18   19   20   21   22   23   24
25   26   27   28   29   30   31   32
33   34   35   36   37   38   39   40
41   42   43   44   45   46   47   48
49   50   51   52   53   54   55   56
57   58   59   60   61   62   63   64
65   66   67   68   69   70   71   72

CNG:OK   SAVE:MENU

01 

  02   

03   04

   05   

06   07

   

08

09   10   11   12   13   14   15   16
17   18   19   20   21   22   23   24
25   26   27   28   29   30   31   32
33   34   35   36   37   38   39   40
41   42   43   44   45   46   47   48
49   50   51   52   53   54   55   56
57   58   59   60   61   62   63   64
65   66   67   68   69   70   71   72

PLEASE  WAIT

1) Press the “TEST” button on Main PCB/Function PCB to set the adjustment mode. (See Fig. 5-2, 5-3 and 5-4)
2) Press the “MENU” button on the remote control about 5 seconds then option setting display is appeared.
    (See Fig. 5-6 and 5-7)
3) Select the option number (See Table 5-1) of corresponding model with “FF/REW/STOP/PAUSE” button on the remote
    control.
4) If selecting the option number is completed, press the “OK (PLAY)” button of remote control.
    (If “OK (PLAY)” button is pressed, the selected number is changes reversed color. ; See Fig. 5-5)
5) Press the “MENU” button of remote control again to store the option number.
    (“PLEASE WAIT” is displayed for a second as shown Fig. 5-7 and this setting is completed.)
6) Turn the Power off.

6-1

6-2

NOTE:

•

-XX, -X mean standardized parts, so they may
have some differences from the original one.

•

Items marked “*” are not stocked since they
are seldom required for routine service. Some
delay should be anticipated when ordering these
items.

•

The mechanical parts with no reference number
in the exploded views are not supplied.

The components identified by mark 

0

or

dotted line with mark 

0

 are critical for safety.

Replace only with part number specified.

Ref. No.

Part No.

Description

Remarks

Ref. No.

Part No.

Description

Remarks

1

3-076-021-01 PANEL FRONT (EZ121)

1

3-076-022-01 PANEL FRONT (ED225)

1

3-076-023-01 PANEL FRONT (ED323)

1

3-076-024-01 PANEL FRONT (EZ424)

2

3-076-017-01 DOOR-CASSETTE

3

3-076-035-01 ASSY-DECK

0 4

1-823-023-11 POWER CORD (ED225/ED323)

0 4

1-824-231-11 POWER CORD (EZ121/EZ424)

5

3-075-020-01 CASE UPPER

6

7-685-646-11 SCREW-TAPTITE

8

1-477-367-11 REMOTE COMMANDER (RMT-V408)

(EXCEPT EZ424)

8

1-477-368-11 REMOTE COMMANDER (RMT-V408A) (EZ424)

9

3-075-088-01 DOOR BATTERY REMOCON

(for RMT-V408/V408A)

not supplied

not supplied

not 
supplied

not 
supplied

not 
supplied

not 
supplied

not 
supplied

not 
supplied

#1

#2

not supplied

• Abbreviation

AUS : Australia model
HK : Hong Kong model
ME : Middle East model

• Hi-Fi model: ED825/ED828/ED925/ED929/

EZ725/EZ727

Mono model: ED225/ED323/EZ121/EZ424

6-3

Ref. No.

Part No.

Description

Remarks

Ref. No.

Part No.

Description

Remarks

51

3-076-025-01 PANEL FRONT (ED825)

51

3-076-026-01 PANEL FRONT (ED828)

51

3-076-027-01 PANEL FRONT (EZ725)

51

3-076-028-01 PANEL FRONT (EZ727)

51

3-076-029-01 PANEL FRONT (ED925)

51

3-076-030-01 PANEL FRONT (ED929)

52

3-076-018-01 DOOR-CASSETTE

53

3-709-670-01 ASSY-DECK

0 54

1-823-023-11 POWER CORD (ED825/ED828/ED925/ED929)

0 54

1-824-231-11 POWER CORD (EZ725/EZ727)

55

3-075-019-01 CASE UPPER

56

7-685-646-11 SCREW-TAPTITE

58

1-477-367-11 REMOTE COMMANDER (RMT-V408)

(ED825/ED828/ED925/EZ725)

58

1-477-368-11 REMOTE COMMANDER (RMT-V408A) (ED929)

58

1-477-369-11 REMOTE COMMANDER (RMT-V409) (EZ727)

59

3-075-088-01 DOOR BATTERY REMOCON

(for RMT-V408/V408A/V409)

not supplied

#1

#2

not 
supplied

not 
supplied

not supplied

not supplied

not supplied

not supplied

not 
supplied

not 
supplied

not supplied