DOWNLOAD Sony SLV-ED115PS / SLV-ED215PS / SLV-ED215TH / SLV-ED313ME / SLV-ED313MJ / SLV-ED313SG / SLV-ED515PS / SLV-ED616ME / SLV-ED616MJ / SLV-ED616SG / SLV-ED815PS / SLV-ED815TH / SLV-ED817PS / SLV-ED817TH / SLV-ED818ME / SLV-ED818SG / SLV-ED915PS / SLV-ED915TH / SLV Service Manual ↓ Size: 7.15 MB | Pages: 82 in PDF or view online for FREE

Model
SLV-ED115PS SLV-ED215PS SLV-ED215TH SLV-ED313ME SLV-ED313MJ SLV-ED313SG SLV-ED515PS SLV-ED616ME SLV-ED616MJ SLV-ED616SG SLV-ED815PS SLV-ED815TH SLV-ED817PS SLV-ED817TH SLV-ED818ME SLV-ED818SG SLV-ED915PS SLV-ED915TH SLV
Pages
82
Size
7.15 MB
Type
PDF
Document
Service Manual
Brand
Device
VCR
File
slv-ed115ps-slv-ed215ps-slv-ed215th-slv-ed313me-sl.pdf
Date

Sony SLV-ED115PS / SLV-ED215PS / SLV-ED215TH / SLV-ED313ME / SLV-ED313MJ / SLV-ED313SG / SLV-ED515PS / SLV-ED616ME / SLV-ED616MJ / SLV-ED616SG / SLV-ED815PS / SLV-ED815TH / SLV-ED817PS / SLV-ED817TH / SLV-ED818ME / SLV-ED818SG / SLV-ED915PS / SLV-ED915TH / SLV Service Manual ▷ View online

– 5 –
SERVICE  NOTE
1. DISASSEMBLY
• This set can be disassembled in the order shown below.
Note: Pages in          indicated pages in the SERVICE MANUAL.
Pages in          indicated pages in the VHS MECHANICAL ADJUSTMENT MANUAL VI.
Set
Upper case
(Page 2-1)
Front Panel
Section
(Page 2-1)
Pinch Press
Block Ass’y
(Page 14)
Ground Shaft
Ass’y
(Page 13)
Mechanism
Deck
(Page 2-3)
FL Complete
 Ass’y
(Page 13)
Drum
Ass’y
(Page 13)
Rear
Panel
(Page 2-2)
Rubber
Belt
(Page 15)
Rubber
Belt
(Page 15)
Slider
(Page 26)
Loading
Gear (T, S)
(Page 28)
Retainer
 Plate
(Page 22)
Rubber
Belt
(Page 15)
Capstan
Motor
(Page 15)
FL Slider
 Block Ass’y
(Page 22)
Pully Gear
Ass’y
(Page 29)
Cam Motor
Retainer
(Page 31)
Cam Gear
(Page 23)
Cam Motor
(Page 31)
Reel Direct
Ass’y
(Page 30)
MA-402
Board
(Page 2-2)
Rotary
Switch
(Page 2-3)
Tuner
Unit
5
Getting Started
Getting Started
Step 2
Setting up the remote commander
Inserting the batteries
Insert two R6 (size AA) batteries by
matching the + and – on the batteries
to the diagram inside the battery
compartment.
Insert the negative (–) end first, then
push in and down until the positive
(+) end clicks into position.
Using the remote commander
You can use this remote
commander to operate this
VCR and a Sony TV. Buttons
on the remote commander
marked with a dot (•) can be
used to operate your Sony TV.
If the TV does not have the g
symbol near the remote sensor,
this remote commander will
not operate the TV.
To operate
the VCR
a Sony TV
Set 
TV/VIDEO
 to
VIDEO
 and point at the remote sensor on the VCR
TV
 and point at the remote sensor on the TV
Notes
• The TV/VIDEO button selects the TV’s input source (either aerial in or line in). The
button does not control this VCR.
• With normal use, the batteries should last about three to six months.
• If you do not use the remote commander for an extended period of time, remove
the batteries to avoid possible damage from battery leakage.
• Do not use a new battery with an old one.
• Do not use different types of batteries.
Remote sensor
TV/VIDEO
6
Getting Started
Step 3
AERIAL IN
AERIAL IN
Mains lead
to mains
AERIAL OUT
Aerial cable (supplied)
: Signal flow
1
Disconnect the aerial cable from your TV
and connect it to AERIAL IN on the rear
panel of the VCR.
2
Connect AERIAL OUT of the VCR and
the aerial input of your TV using the
supplied aerial cable.
3
Connect the mains lead to the mains.
If the 3-pin plug does not fit into the mains outlet, detach the plug
by loosening the screw, then use the 2-pin plug inside.
Connecting the VCR
Connect the aerial to your VCR and TV as shown below to watch TV
programmes and VCR pictures on your TV. In addition, if your TV has
audio/video (A/V) input jacks, we recommend you connect the VCR to
your TV using an audio/video cable to get a better picture and sound.
Connecting the aerial
OUT
IN
AERIAL
IN
OUT
AERIAL
7
Getting Started
Getting Started
Additional connections
Note
• To play a tape in stereo, you must use either
one of the connections shown below.
To a TV that has audio/video input jacks
This additional connection improves
picture and sound quality. Connect the
TV as shown on the right.
To a stereo system
You can improve sound quality by
connecting a stereo system as shown on
the right.
LINE IN
Audio/video cable (not supplied)
LINE OUT
LINE IN
LINE AUDIO OUT
Audio cable (not supplied)
SECTION 1
GENERAL
This section is extracted from
SLV-ED919MI Instruction Manual.
(3-065-580-11)
8
Getting Started
Step 4
Tuning your TV to the VCR
If you have connected your VCR to the TV using the audio/video cable, skip
this step.
If your TV colour system and TV system are
Select
PAL
I
I
D/K
K
B/G
G
NTSC
M
M
1
Press ?/1 ON/STANDBY to turn on the VCR.
2
Press RF CHANNEL on the VCR.
The factory-preset RF channel flashes in the display window for
about three seconds.
Press RF CHANNEL again while the RF channel is flashing.
The VCR signal is output through this channel to the TV.
3
Turn on your TV and select a programme position for the VCR picture.
This channel will now be referred to as the video channel.
Some TVs reserve a programme position, such as “0”, for a VCR. In
this case, select the reserved programme position for the VCR
picture. Refer to your TV’s instruction manual for details.
4
Press RF CHANNEL.
The TV system indicator appears in the display window.
Press PROGRAM +/– to select the correct TV system.
Selected TV system
ON/STANDBY
RF CHANNEL
SP
APC
PROGRAM
RF CHANNEL
SP
APC
PROGRAM +/–
RF CHANNEL
?/1
 ON/STANDBY
SLV-ED115/ED215/ED313/ED515/ED616/ED815/ED817/ED818/ED915/ED919/EZ111/
EZ212/EZ414/EZ715/EZ717
1-1
9
Getting Started
Getting Started
5
Tune the TV to the same channel as
shown in the display window so that
the picture on the right appears on the
TV screen.
Refer to your TV manual for tuning
instructions.
If you select the wrong TV system in step 4, the picture may not
appear. Select the appropriate TV system and tune the TV again.
If the picture does not appear clearly, see “To obtain a clear picture
from the VCR” below.
6
Press RF CHANNEL.
You have now tuned your TV to the VCR. From now on, whenever
you want to play a tape, set the TV to the video channel.
To obtain a clear picture from the VCR
If the picture does not appear clearly in step 5 above, first go to step 6 to
finish this procedure once. Then start from step 2. After pressing RF
CHANNEL twice in step 2 to display the RF channel, press PROGRAM +/–
so that another RF channel appears. Then tune the TV to the new RF channel
until a clear picture appears.
To set another RF channel number on the VCR, select a channel number that
does not receive a broadcast signal in your area and is clear of interference
from other channels.
If you cannot obtain a clear picture after performing this procedure, we
recommend you connect the VCR and TV using the audio/video cable (see
“To a TV that has audio/video input jacks” on page 7). If the same symptom
persists, consult your nearest Sony dealer.
Note
• If you set the wrong TV system, you may have no sound or sound may be distorted
(noisy sound).
SONY VIDEO CASSETTE
RECORDER
RF CHANNEL
10
Getting Started
Step 5
Press and hold ONE TOUCH TUNING on the VCR for more than
three seconds.
The VCR starts presetting the channels.
The WAIT indicator goes off when all receivable channels are preset.
To check if the channels are preset correctly
Set the TV to the video channel and press PROGRAM +/– on the VCR.
If the TV screen changes to a different programme each time you press
PROGRAM +/–, the channels are preset correctly.
If the sound is distorted or noisy, the VCR is set to a TV system different
from your area’s system. Select the correct TV system and preset channels
using the TUNER PRESET menu as shown on the next page.
Tip
• To stop the One Touch Tuning function, press ONE TOUCH TUNING or x STOP
on the VCR during the setting.
ONE TOUCH
TUNING
Presetting channels
First, we recommend that you preset the receivable channels in your area
using the One Touch Tuning function or AUTO PRESET in the TUNER
PRESET menu. Then, if some channels cannot be preset automatically, set
them manually. If there are any unwanted channels among the preset ones,
you can disable the channels.
If you live in the area where various TV systems coexist, and have channels
that do not match the TV system you selected in automatic presetting, reset
the TV system for those channels (see “Resetting the TV system” on page
15). If the channels do not match the TV system, the sound may be distorted
or noisy, or the colour TV programme may become black and white, etc.
Presetting all receivable
channels using the One
Touch Tuning function
PROGRAM +/–
ONE TOUCH
TUNING
SP
APC
11
Getting Started
Getting Started
OK
M/m/</,
MENU
Presetting all receivable
channels automatically
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
1
Press MENU, then press 
M/m to move the
cursor (B) to TUNER PRESET and press
OK.
2
Press 
M/m/</, to move the cursor (B)
to SYSTEM, then select B/G, D/K, I or M,
whichever is applicable in your area. If
SYSTEM is set to the wrong position, the
sound will be distorted or noisy.
3
Press 
M/m/</, to  move the cursor
(B) to NORMAL/CATV, then select
NORM.
To preset CATV channels, select CATV.
continued
OK
PLAY
MENU
OK
PLAY
TUNER PRESET
PROG 1
NORMAL / CATV
SYSTEM
AUTO PRESET
CHANNEL SET
AFT
FINE TUNING
NORM
ON
CATV
B / G
D / K
M
I
OFF
1
SELECT
SET
: [
]
: [
]
TUNER PRESET
PROG 1
NORMAL / CATV
SYSTEM
AUTO PRESET
CHANNEL SET
AFT
FINE TUNING
NORM
ON
CATV
B / G
D / K
M
I
OFF
1
SELECT
SET
: [
]
: [
]
TUNER PRESET
PROG 1
NORMAL / CATV
SYSTEM
AUTO PRESET
CHANNEL SET
AFT
FINE TUNING
NORM
ON
CATV
B / G
D / K
M
I
OFF
1
SELECT
SET
: [
]
: [
]
OK
PLAY
12
Getting Started
Step 5: Presetting channels (continued)
4
Press 
M/m to move the cursor (B) to
AUTO PRESET, then press OK.
All receivable channels are preset in
numerical sequence. When no more
receivable channels can be found,
presetting stops and the picture from the
lowest numbered channel is displayed on
the TV screen.
Notes
• Picture might disappear for a few seconds during One Touch Tuning and auto
presetting functions. This is for tuning procedure, and not a malfunction.
• The channel numbers in the CHANNEL SET column may not be the same as those
in your area. This is because this VCR’s channel search system is based on the fixed
TV system that has the widest channel coverage. If necessary, apply your local
channel numbers to the programme positions (see “Presetting channels manually”
on page 13).
• If the received channel is on cable TV, “C” appears on the left of the channel in step
4 in most areas. However, this will not be applied in some areas (see pages 17 to 24
for reference).
TUNER PRESET
PROG 1
NORMAL / CATV
SYSTEM
AUTO PRESET
CHANNEL SET
NORM
ON
CATV
B / G
D / K
M
I
OFF
1
AFT
FINE TUNING
PLEASE WAIT
OK
PLAY
1-2
13
Getting Started
Getting Started
Presetting channels
manually
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
1
Press MENU, then press 
M/m to move the
cursor (B) to TUNER PRESET and press
OK.
2
Press 
M/m/</, to move the cursor (B)
to NORMAL/CATV, then select NORM.
To preset CATV channels, select CATV.
3
Press >/. to move the cursor (B) to
CHANNEL SET.
PROG +/–
MENU
OK
M/m/</,
continued
TUNER PRESET
PROG10
NORMAL / CATV
SYSTEM
AUTO PRESET
CHANNEL SET
AFT
FINE TUNING
NORM
ON
CATV
B / G
D / K
M
I
OFF
21
SELECT
SET
: [
]
: [
]
TUNER PRESET
PROG10
NORMAL / CATV
SYSTEM
AUTO PRESET
CHANNEL SET
AFT
FINE TUNING
NORM
ON
CATV
B / G
D / K
M
I
OFF
21
SELECT
SET
: [
]
: [
]
TUNER PRESET
PROG10
NORMAL / CATV
SYSTEM
AUTO PRESET
CHANNEL SET
AFT
FINE TUNING
NORM
ON
CATV
B / G
D / K
M
I
OFF
21
SELECT
SET
: [
]
: [
]
OK
PLAY
MENU
OK
PLAY
OK
PLAY
14
Getting Started
Selected programme
position
4
Press PROG +/–  to select the programme
position.
5
Press 
, repeatedly until the channel you
want is displayed.
Pressing 
< goes back to the previous
channels.
The channels are scanned in the order
shown on page 17 to 24.
If you know the number of the channel you want, press the
programme number buttons. For example, for channel 5, first press
“0” and then press “5”.
6
If the TV sound is distorted or noisy, press
M/m/</, to move the cursor (B) to
SYSTEM, then select B/G, D/K, I or
M, whichever is applicable in your area.
7
To allocate another channel to another programme position, repeat
steps 4 and 5.
8
Press OK.
Step 5: Presetting channels (continued)
TUNER PRESET
PROG14
NORMAL / CATV
SYSTEM
AUTO PRESET
CHANNEL SET
AFT
FINE TUNING
NORM
ON
CATV
B / G
D / K
M
I
OFF
21
SELECT
SET
: [
]
: [
]
TUNER PRESET
PROG14
NORMAL / CATV
SYSTEM
AUTO PRESET
CHANNEL SET
AFT
FINE TUNING
NORM
ON
CATV
B / G
D / K
M
I
OFF
35
SELECT
SET
: [
]
: [
]
TUNER PRESET
PROG14
NORMAL / CATV
SYSTEM
AUTO PRESET
CHANNEL SET
AFT
FINE TUNING
NORM
ON
CATV
B / G
D / K
M
I
OFF
35
SELECT
SET
: [
]
: [
]
PROG
OK
PLAY
OK
PLAY
OK
PLAY
15
Getting Started
Getting Started
Disabling unwanted programme positions
After presetting channels, you can disable unused programme positions. The
disabled positions will be skipped later when you press the PROG +/–
buttons.
1
In step 5 on page 14, press programme number button “0” twice to
display the number “0” beside CHANNEL SET.
2
Press OK.
Resetting the TV system (only for areas where
various TV systems coexist)
If the sound is distorted or noisy, or the colour TV programme becomes
black and white, etc., that channel may not be matched to the proper TV
system. In this case, try the following steps.
1
Press PROG +/– or programme number buttons to select the
programme position that has the channel with above described
conditions.
2
Press MENU, then select TUNER PRESET and press OK.
3
Select SYSTEM and select the TV system on which you can obtain the
best sound and picture.
4
Repeat steps 2 and 3 for other positions you want to reset the TV
system to.
5
Press OK.
continued
16
Getting Started
If the picture is not clear
Normally, the Auto Fine Tuning (AFT) function automatically tunes in
channels clearly. If, however, the picture is not clear, you may also use the
manual tuning function.
1
Press PROG +/– to select the programme number for which you cannot
obtain a clear picture.
2
Press MENU, then select TUNER PRESET and press OK.
3
Select FINE TUNING.
The fine tuning meter appears.
4
Press 
</, to get a clearer picture, then press OK.
Note that the AFT (Auto Fine Tuning) setting switches to OFF.
Notes
• The menu disappears automatically if you do not proceed for more than a few
minutes.
• The channel numbers in the CHANNEL SET column may not be the same as those
in your area. This is because this VCR’s channel search system is based on the fixed
TV system that has the widest channel coverage. If necessary, apply your local
channel numbers to the programme positions (see “Presetting channels manually”
on page 13).
Step 5: Presetting channels (continued)
Selected programme position
PROG14
– – – –
– – – –
TUNER PRESET
NORMAL / CATV
AUTO PRESET
CHANNEL SET
AFT
FINE TUNING
NORM
ON
CATV
OFF
35
SET
: [
]
SYSTEM
B / G
D / K
M
I
1-3
Page of 82
Display

Click on the first or last page to see other SLV-ED115PS / SLV-ED215PS / SLV-ED215TH / SLV-ED313ME / SLV-ED313MJ / SLV-ED313SG / SLV-ED515PS / SLV-ED616ME / SLV-ED616MJ / SLV-ED616SG / SLV-ED815PS / SLV-ED815TH / SLV-ED817PS / SLV-ED817TH / SLV-ED818ME / SLV-ED818SG / SLV-ED915PS / SLV-ED915TH / SLV service manuals if exist.