Sony SLV-D993PAZ / SLV-D993PB / SLV-D993PE / SLV-D993PME / SLV-D998PD Service Manual ▷ View online
1-11
47
Recording TV programmes using the timer
Ba
sic
sic
Op
er
atio
atio
ns
To stop recording
To stop the DVD-VCR while recording, press SELECT VIDEO and then press
x.
Daily/weekly recording
In step 4, press
v to select the recording pattern. Each time you press v, the
indication changes as shown below. Press
V to change the indication in reverse order.
today
t DLY t MO~SA t MO~FR t W-SA (every Saturday) ..... t
W-SU (every Sunday)
t 1 month later t (dates count down) t today
To watch another TV programme after setting the timer
Set the TV to the TV’s antenna input and then select another channel on the TV.
This change does not affect the recording.
This change does not affect the recording.
3
Set the programme position, date, start and
stop times and tape speed:
stop times and tape speed:
1
Press
b to select each item in turn.
2
Press
V/v to set each item.
To correct a setting, press
B to return to that
setting and reset.
• To record the same programme every day or
the same day every week, see “Daily/weekly recording” on page 47.
• To record from other equipment connected to one or more of the LINE
inputs, press INPUT SELECT to display the connected line in the “PR”
position.
position.
4
Press ENTER to confirm the setting.
To enter another setting, press
V/v to select the next row and repeat step 3.
5
Press ENTER to confirm all settings.
6
Press
?/1 to turn off the DVD-VCR.
The
indicator appears in the display window and the VCR stands by for
recording.
To record from other equipment, leave the connected equipment switched
on.
on.
ENTER
INPUT
SELECT
SET UP
v
V
b
B
PR DATE
START STOP
SPEED
CLEAR
ENTER
ENTER
continued
48
Recording TV programmes using the timer
To use the Auto Tape Speed function
In step 4, press
v to select “Auto.” When you are recording a programme in the SP
mode and the remaining tape length becomes shorter than the recording time, the
recording tape speed is automatically changed to the LP mode. Note that some noise
will appear on the picture when the tape speed is changed. To operate this function
correctly, the “Tape Select” setting in the “VIDEO SETUP” menu must be accurate
(see page 101).
recording tape speed is automatically changed to the LP mode. Note that some noise
will appear on the picture when the tape speed is changed. To operate this function
correctly, the “Tape Select” setting in the “VIDEO SETUP” menu must be accurate
(see page 101).
Tips
• To check, change, or cancel the programme setting, see “Checking/changing/cancelling timer
• To check, change, or cancel the programme setting, see “Checking/changing/cancelling timer
settings” on page 49.
• You can also display the timer programming menu by first pressing SET UP, then
V/v to
select
(TIMER) and ENTER in step 2.
Note
• The
• The
indicator flashes in the display window when you press
?/1 with no tape inserted.
49
Checking/changing/cancelling timer settings
Ba
sic
sic
Op
er
atio
atio
ns
Checking/changing/cancelling timer
settings
settings
Before you start…
• Check that the DVD-VCR clock is set to
the correct time.
• Turn on the DVD-VCR and your TV.
• Set the TV to video input so that the signal
• Set the TV to video input so that the signal
from the player appears on the TV screen.
• Set TV / DVD·VIDEO switch to
DVD·VIDEO on the remote (page 11).
• To record from other equipment, turn it on.
• Insert a tape with its safety tab in place.
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
recording time.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
DVD playback.
1
Press SELECT VIDEO to control the VCR.
2
Press TIMER.
The timer programming menu appears.
V/v/B/b
ENTER
ENTER
CLEAR
TIMER
SELECT VIDEO
SUBTITLE/
TIMER
ENTER
v
V
b
B
3 5
0 :0 0
1 : 0 0
SP
2 0
: 0 0
: 3 0
LP
6 0
:3 0
: 0 0
Auto
MO 30
WE 02
TU 30
WE 02
TU 30
2
2
2
0
2
2
3
2
2
2
PR DATE
START STOP
SPEED
SET UP
continued
50
Checking/changing/cancelling timer settings
To close the timer programming menu
Press SET UP.
When the timer settings overlap
The programme that starts first has priority and the second programme starts
recording only after the first programme has finished. If the programmes start at the
same time, the programme listed first in the menu has priority.
recording only after the first programme has finished. If the programmes start at the
same time, the programme listed first in the menu has priority.
Tip
• You can also display the timer programming menu by first pressing SET UP, then
• You can also display the timer programming menu by first pressing SET UP, then
V/v to
select
(TIMER) and ENTER in step 2.
3
Press
V/v to select setting you want to change
or cancel.
• To change the setting, press
B/b to select
the item you want to change, and press
V/v
to change it.
• To cancel the setting, press CLEAR.
4
Press ENTER to confirm the setting.
5
Press ENTER to confirm all settings.
If any settings remain, turn off the VCR to return to recording standby.
To record from other equipment, leave the connected equipment switched
on.
on.
ENTER
CLEAR
CLEAR
ENTER
v
V
b
B
3 5
0 :0 0
1 : 0 0
SP
2 0
: 0 0
: 3 0
LP
6 0
:3 0
: 0 0
Auto
MO 30
WE 02
TU 30
WE 02
TU 30
2
2
2
0
2
2
3
2
2
2
PR DATE
START STOP
SPEED
SET UP
ENTER
ENTER
about 20 seconds
will be cut off
Programme 1
Programme 2
about 20 seconds will be cut off
Programme 1
Programme 2
1-12
51
Audio Setup
DV
D Se
D Se
ttings
and
Adjus
tme
nts
DVD Settings and Adjustments
Audio Setup
“Audio Setup” allows you to set the sound
according to the playback and connection
conditions.
according to the playback and connection
conditions.
Before you start...
• Set TV / DVD·VIDEO switch to
DVD·VIDEO on the remote (page 11).
1
Press SET UP when the DVD player is in stop
mode, then press
mode, then press
V/v to select
(DVD)
and press ENTER.
2
Press
V/v to select “Audio Setup,” then press
ENTER.
3
Press
V/v to select the setup item from the displayed list:
“Dolby Digital,” “MPEG,” “DTS” or “Audio DRC.”
V/v/B/b
ENTER
ENTER
SET UP
SET UP
ENTER
Language Setup
Screen Setup
Parental Setup
DivX Registration Code
Parental Setup
DivX Registration Code
Audio Setup
RETURN
DVD SETUP
SET UP
ENTER
V v
ENTER
MPEG
Dolby Digital
DTS
Audio DRC
Audio DRC
RETURN
AUDIO SETUP
SET UP
v
V
b
B
[ Off ]
[ PCM ]
[ Standard ]
[ D-PCM ]
ENTER
continued
52
Audio Setup
Menu choices
The default setting is indicated in bold print.
• Dolby Digital
Selects the type of Dolby Digital signal.
Selects the type of Dolby Digital signal.
• MPEG
Selects the type of MPEG audio signal.
Selects the type of MPEG audio signal.
• DTS
Selects whether or not to output DTS signals.
Selects whether or not to output DTS signals.
4
Press
B/b to select an item.
5
Press SET UP to exit the menu.
D-PCM
Select this when the player is connected to an audio component
lacking a built-in Dolby Digital decoder.
lacking a built-in Dolby Digital decoder.
Dolby Digital
Select this when the player is connected to an audio component
with a built-in Dolby Digital decoder.
with a built-in Dolby Digital decoder.
PCM
Select this when the player is connected to an audio component
lacking a built-in MPEG decoder. If you play MPEG audio sound
tracks, the player outputs stereo signals via the DIGITAL AUDIO
OUT (COAXIAL) jack.
lacking a built-in MPEG decoder. If you play MPEG audio sound
tracks, the player outputs stereo signals via the DIGITAL AUDIO
OUT (COAXIAL) jack.
MPEG
Select this when the player is connected to an audio component
with a built-in MPEG decoder.
with a built-in MPEG decoder.
Off
Select this when the player is connected to an audio component
lacking a built-in DTS decoder.
lacking a built-in DTS decoder.
On
Select this when the player is connected to an audio component
with a built-in DTS decoder.
with a built-in DTS decoder.
ENTER
SET UP
53
Audio Setup
DV
D Se
D Se
ttings
and
Adjus
tme
nts
• Audio DRC (Dynamic Range Control)
Makes the sound clear when the volume is turned down when playing a DVD that
conforms to “Audio DRC.” This affects the output from the following jacks:
– OUT AUDIO L/R jacks
– DIGITAL AUDIO OUT (COAXIAL) jack only when “Dolby Digital” is set to “D-
Makes the sound clear when the volume is turned down when playing a DVD that
conforms to “Audio DRC.” This affects the output from the following jacks:
– OUT AUDIO L/R jacks
– DIGITAL AUDIO OUT (COAXIAL) jack only when “Dolby Digital” is set to “D-
PCM.”
Notes
• If you connect a component that does not conform to the selected audio signal, a loud noise
• If you connect a component that does not conform to the selected audio signal, a loud noise
(or no sound) will come out from the speakers, affecting your ears or causing the speakers to
be damaged.
be damaged.
• Noise may occur in the LinearPCM double-speed audio. This is not a malfunction.
• Digital audio signal may not be output correctly if you set “MPEG” to “MPEG” in “AUDIO
• Digital audio signal may not be output correctly if you set “MPEG” to “MPEG” in “AUDIO
SETUP” menu while playing a super VCD.
Standard
Normally select this position.
Wide Range
Gives you the feeling of being at a live performance.
54
Screen Setup
Screen Setup
“Screen Setup” allows you to set the screen
according to the playback and connection
conditions.
according to the playback and connection
conditions.
Before you start...
• Set TV / DVD·VIDEO switch to
DVD·VIDEO on the remote (page 11).
1
Press SET UP when the DVD player is in stop
mode, then press
mode, then press
V/v to select
(DVD)
and press ENTER.
2
Press
V/v to select “Screen Setup,” then press
ENTER.
3
Press
V/v to select “TV Type.”
To set the “Progressive” setting, see page 56.
V/v/B/b
ENTER
ENTER
SET UP
SET UP
ENTER
Language Setup
Screen Setup
Parental Setup
Parental Setup
Audio Setup
RETURN
DVD SETUP
SET UP
ENTER
V v
DivX Registration Code
ENTER
TV Type
RETURN
SCREEN SETUP
SET UP
v
V
b
B
Progressive
[
Off
]
[
4:3 Letter Box
]
ENTER
1-13
55
Screen Setup
DV
D Se
D Se
ttings
and
Adjus
tme
nts
Menu choices
• TV Type
Selects the aspect ratio of the connected TV (4:3 standard or wide).
The default setting is indicated in bold print.
Selects the aspect ratio of the connected TV (4:3 standard or wide).
The default setting is indicated in bold print.
Notes
• Playback settings stored in the disc take priority over the “DVD SETUP” menu settings and
• Playback settings stored in the disc take priority over the “DVD SETUP” menu settings and
not all the functions described may work.
• Depending on the DVD VIDEO, “4:3 Letter Box” may be selected automatically instead of
“4:3 Pan Scan” or vice versa.
• The connection using S-VIDEO OUT jack is only for the DVD player.
4
Press
B/b to select an item.
5
Press SET UP to exit the menu.
4:3 Letter Box
Select this when you connect a 4:3 screen TV. Displays a wide
picture with bands on the upper and lower portions of the screen.
picture with bands on the upper and lower portions of the screen.
4:3 Pan Scan
Select this when you connect a 4:3 screen TV. Automatically
displays the wide picture on the entire screen and cuts off the
portions that do not fit.
displays the wide picture on the entire screen and cuts off the
portions that do not fit.
16:9
Select this when you connect a wide-screen TV or a TV with a wide
mode function.
mode function.
ENTER
SET UP
4:3 Pan Scan
4:3 Letter Box
16:9
continued
56
Screen Setup
If your TV accepts progressive (525p/625p) format signals, you will enjoy accurate colour
reproduction and high quality image.
reproduction and high quality image.
To set the “Progressive” setting
1
Follow step 1 and 2 on page 54, then press
V/v to select
“Progressive.”
2
Press
B/b to select “On,” then press ENTER.
3
Follow the instructions appearing on the screen.
1
Ensure your TV is (525P/625P) Progressive Scan capable.
2
Connect with Component Video Output jacks (red/green/
blue connections).
See “S-Video/Component hookup” on page 27.
blue connections).
See “S-Video/Component hookup” on page 27.
3
Press
B/b to select [OK] to test your video signal.
TV Type
RETURN
SCREEN SETUP
SET UP
v
V
b
B
Progressive
[
Off
]
[
4:3 Letter Box
]
TV Type
RETURN
SCREEN SETUP
SET UP
v
V
b
B
Progressive
[
On
]
[
4:3 Letter Box
]
Progressive Scan Output
1) Connect with Component Video
Output jacks.
2) Select [OK] to test your video signal.
3) If video signal appears OK,
video connection is complete.
1) Connect with Component Video
Output jacks.
2) Select [OK] to test your video signal.
3) If video signal appears OK,
video connection is complete.
RETURN
SCREEN SETUP
ENTER
SET UP
b
B
OK
CANCEL
TEST SCREEN
SCREEN SETUP
If picture is OK, press [ENTER] key.
If picture is distorted, press [RETURN] key.
If picture is distorted, press [RETURN] key.
To Deactivate
Press [PAUSE] button on the product for
5 seconds.
Press [PAUSE] button on the product for
5 seconds.
RETURN
SCREEN SETUP
ENTER
57
Screen Setup
DV
D Se
D Se
ttings
and
Adjus
tme
nts
To cancel the “Progressive” setting
Select “Off” in step 2.
You can also cancel by pressing SELECT DVD and then press
You can also cancel by pressing SELECT DVD and then press
X on the unit
continuously for 5 seconds or more when the DVD-VCR is in stop mode.
Note
• If you select progressive signal when you connect the DVD player to a TV that cannot accept
• If you select progressive signal when you connect the DVD player to a TV that cannot accept
the signal in progressive format, the image quality will deteriorate. In this case, set
“Progressive” to “Off.”
“Progressive” to “Off.”
4
If video signal appears OK, video connection is complete.
Press ENTER.
Press ENTER.
The PROGRESSIVE indicator on the unit lights up in orange.
If picture is distorted, press
O RETURN. Check the connection (page 27).
5
Press SET UP to exit the menu.
TV Type
RETURN
SCREEN SETUP
SET UP
v
V
b
B
Progressive
[
On
]
[
4:3 Letter Box
]
PROGRESSIVE indicator
58
Setting the display or sound track language
Setting the display or sound track
language
language
You can set various languages for the disc’s
menu, sound track or subtitle.
menu, sound track or subtitle.
Before you start...
• Set TV / DVD·VIDEO switch to
DVD·VIDEO on the remote (page 11).
1
Press SET UP when the DVD player is in stop
mode, then press
mode, then press
V/v to select
(DVD)
and press ENTER
.
2
Press
V/v to select “Language Setup,” then
press ENTER.
The “LANGUAGE SETUP” menu appears.
V/v/B/b
ENTER
ENTER
SET UP
SET UP
ENTER
Language Setup
Screen Setup
Parental Setup
Parental Setup
Audio Setup
RETURN
DVD SETUP
SET UP
ENTER
V v
DivX Registration Code
ENTER
Audio
DVD Menu
Subtitle
RETURN
LANGUAGE SETUP
SET UP
: Audio Follow
ENTER
: Original
: English
V v
1-14
59
Setting the display or sound track language
DV
D Se
D Se
ttings
and
Adjus
tme
nts
Tip
• If you select “Others” in step 4, an additional language
• If you select “Others” in step 4, an additional language
menu appears. Press
V/v/B/b to select the desired
language, then press ENTER.
Notes
• When you select a language that is not recorded on the DVD VIDEO in step 4, one of the
• When you select a language that is not recorded on the DVD VIDEO in step 4, one of the
recorded languages will be automatically selected.
• Playback settings stored in the disc take priority over the DVD SETUP settings and not all the
functions described may work.
• If you change the DVD MENU LANGUAGE setting after playing the disc, press
Z to open
and close the disc tray to activate the menu setting, then play the disc again.
3
Press
V/v to select the language setup item from the displayed list:
“DVD Menu,” “Audio,” or “Subtitle.”
Then press ENTER.
Then press ENTER.
4
Press
V/v to select the desired language, then press ENTER.
• DVD MENU LANGUAGE
You can select the desired language for the
disc’s menu.
disc’s menu.
• AUDIO LANGUAGE
Switches the language of the sound track.
When you select “Original,” the language
given priority in the disc is selected.
When you select “Original,” the language
given priority in the disc is selected.
• SUBTITLE LANGUAGE
Switches the language of the subtitle
recorded on the DVD VIDEO. When you
select “Audio Follow,” the language for the
subtitle changes according to the language
you selected for the sound track.
recorded on the DVD VIDEO. When you
select “Audio Follow,” the language for the
subtitle changes according to the language
you selected for the sound track.
5
Press SET UP to exit the menu.
ENTER
ENTER
RETURN
DVD MENU LANGUAGE
SET UP
ENTER
V
English
Français
Deutsch
Français
Deutsch
B
Español
Italiano
Nederlands
Others
Italiano
Nederlands
Others
DVD Menu
v
RETURN
AUDIO LANGUAGE
SET UP
ENTER
English
Français
Deutsch
Français
Deutsch
B
Español
Italiano
Nederlands
Original
Italiano
Nederlands
Original
Audio
Others
V v
RETURN
SUBTITLE LANGUAGE
SET UP
ENTER
English
Audio Follow
Français
Deutsch
Deutsch
B
Español
Italiano
Nederlands
Others
Italiano
Nederlands
Others
Subtitle
V v
SET UP
RETURN
DVD MENU LANGUAGE
SET UP
ENTER
v
V
Cesky
Dansk
Magyar
Svenska
Norsk
Polski
Dansk
Magyar
Svenska
Norsk
Polski
Suomi
Afrikaans
Arabic
Chinese
Greek
Afrikaans
Arabic
Chinese
Greek
Hindi
Japanese
Russian
Turkish
Thai
Korean
Japanese
Russian
Turkish
Thai
Korean
Português
B b
60
Parental Control (limiting playback by children)
Parental Control
(limiting playback by children)
Playback of some DVD VIDEOs can be
limited according to a predetermined level
such as the age of the users. The parental
control function allows you to set a playback
limitation level.
limited according to a predetermined level
such as the age of the users. The parental
control function allows you to set a playback
limitation level.
Before you start...
• Set TV / DVD·VIDEO switch to
DVD·VIDEO on the remote (page 11).
1
Press SET UP when the DVD player is in stop
mode, then press
mode, then press
V/v to select
(DVD)
and press ENTER.
2
Press
V/v to select “Parental Setup,” then
press ENTER.
Number
buttons
buttons
V/v/B/b
ENTER
ENTER
SET UP
H
SET UP
ENTER
Language Setup
Screen Setup
Parental Setup
Parental Setup
Audio Setup
RETURN
DVD SETUP
SET UP
ENTER
V v
DivX Registration Code
ENTER
Use Password
RETURN
PARENTAL SETUP
SET UP
[ No ]
B b
61
Parental Control (limiting playback by children)
DV
D Se
D Se
ttings
and
Adjus
tme
nts
3
Press
b to select “Yes.”
• If you have not entered a password
The display for registering a new password
appears.
Enter a 4-digit password using the number
buttons.
appears.
Enter a 4-digit password using the number
buttons.
The display for confirming the password
appears.
Re-enter the password.
appears.
Re-enter the password.
• When you have already registered a
password
The display for entering the password appears.
Enter a 4-digit password using the number
buttons.
After registering a password, if you set “Use
Password” to “No,” “PASSWORD CHECK”
screen will not appear.
Enter a 4-digit password using the number
buttons.
After registering a password, if you set “Use
Password” to “No,” “PASSWORD CHECK”
screen will not appear.
4
Press
V/v to select “Rating Level,” then press
ENTER.
5
Press
V/v to select the level you want, then
press ENTER.
The options are as follows.
Level 8 (Adult)
y Level 7 y Level 6 y
Level 5
y Level 4 y Level 3 y Level 2
y Level 1 (Kids Safe)
The lower the value, the stricter the limitation.
6
Press SET UP to exit the menu.
ENTER
1
2
3
4
5
6
7
8
9
0
Enter Password
– – – –
CREATE PASSWORD
-~9
RETURN
CREATE PASSWORD
-~9
RETURN
Re-enter Password
– – – –
PASSWORD CHECK
-~9
RETURN
Enter Password
– – – –
Use Password
RETURN
PARENTAL SETUP
SET UP
[ Yes ]
v
V
b
B
Rating Level
Change Password
Change Password
:1
ENTER
RETURN
RATING LEVEL
SET UP
ENTER
V
Level 8 Adult
Level 7
Level 6
Level 5
Level 4
Level 3
Level 7
Level 6
Level 5
Level 4
Level 3
Level 2
Level 1 Kids Safe
Level 1 Kids Safe
v
ENTER
RETURN
RATING LEVEL
SET UP
ENTER
Level 8 Adult
Level 7
Level 6
Level 5
Level 4
Level 3
Level 7
Level 6
Level 5
Level 4
Level 3
Level 2
Level 1 Kids Safe
Level 1 Kids Safe
V v
SET UP
continued
62
Parental Control (limiting playback by children)
To change the password
To turn off the Parental Control function
Set “Use Password” to “No” in step 3 on page 61.
To play a disc for which Parental Control is set
If you forget your password
Notes
• When you play DVD VIDEOs which do not have the Parental Control function, playback
• When you play DVD VIDEOs which do not have the Parental Control function, playback
cannot be limited on this player.
• All the ratings higher than the level you select will be blocked.
• Write your password down and keep it in a safe place in case you forget it.
• All DVD settings below which you set in the “DVD SETUP” menu will also be cleared when
• Write your password down and keep it in a safe place in case you forget it.
• All DVD settings below which you set in the “DVD SETUP” menu will also be cleared when
you reset the DVD-VCR to clear the password setting.
– Language Setup
– Audio Setup
– Screen Setup
– Parental Setup
– Language Setup
– Audio Setup
– Screen Setup
– Parental Setup
1
Select “Change Password” in step 4 on page 61.
The display for entering a new password appears.
The display for entering a new password appears.
2
Enter a new 4-digit password using the number buttons.
The display for confirming the password appears.
The display for confirming the password appears.
3
Re-enter the new password.
1
Insert the disc, then press
H.
The display for entering your password appears.
2
Enter your 4-digit password using the number buttons.
The player starts playback.
The player starts playback.
1
Turn on the DVD-VCR
.
2
Remove the disc and close the disc tray.
3
Hold down
m and M on the front panel simultaneously for 5 seconds.
“Reset OK” appears on the screen.
4
Turn off the DVD-VCR.
The password is cleared.
The password is cleared.
5
To create a new password, follow step 3 on page 61.
Click on the first or last page to see other SLV-D993PAZ / SLV-D993PB / SLV-D993PE / SLV-D993PME / SLV-D998PD service manuals if exist.