Sony SLV-D973PE / SLV-D983PD / SLV-D983PGI Service Manual ▷ View online
— 9 —
4 HANDLING THE OPTICAL PICK-UP
The laser diode in the optical pick up may suffer electrostatic
breakdown because of potential static electricity from clothing and
your body.
breakdown because of potential static electricity from clothing and
your body.
The following method is recommended.
(1) Place a conductive sheet on the work bench (The black sheet
(1) Place a conductive sheet on the work bench (The black sheet
used for wrapping repair parts.)
(2) Place the set on the conductive sheet so that the chassis is
grounded to the sheet.
(3) Place your hands on the conductive sheet (This gives them the
same ground as the sheet.)
(4) Remove the optical pick up block
(5) Perform work on top of the conductive sheet. Be careful not to
let your clothes or any other static sources to touch the unit.
◆ Be sure to put on a wrist strap grounded to the sheet.
◆ Be sure to lay a conductive sheet made of copper etc. Which is
◆ Be sure to lay a conductive sheet made of copper etc. Which is
grounded to the table.
Fig.3
(6) Short the short terminal on the PCB, which is inside the Pick-
Up ASS’Y, before replacing the Pick-Up. (The short terminal is
shorted when the Pick-Up Ass’y is being lifted or moved.)
shorted when the Pick-Up Ass’y is being lifted or moved.)
(7) After replacing the Pick-up, open the short terminal on the PCB.
THE UNIT
WRIST-STRAP
FOR GROUNDING
FOR GROUNDING
1M
1M
CONDUCTIVE SHEET
— 10 —
5 PICK-UP DISASSEMBLY AND REASSEMBLY
5-1 Disassembly
1) Remove the power cord.
2) Disassemble the Deck-Assy.
3) Make solder land 2 points short on Pick-up.
2) Disassemble the Deck-Assy.
3) Make solder land 2 points short on Pick-up.
(See Fig. 4)
4) Disassembly the Pick-up.
5-2 Assembly
1) Replace the Pick-up.
2) Remove the soldering 2 points on Pick-up.
3) Reassemble the Deck-Assy.
2) Remove the soldering 2 points on Pick-up.
3) Reassemble the Deck-Assy.
Note:
If the assembly and disassembly are not done in correct sequence, the Pick-up may be damaged.
PICK-UP ASS'Y
SOLDER LAND 2 POINTS SHORT
Fig. 4
1-1
1. GENERAL
This section is extracted from instruction manual. (2-671-548-11)
6
About this manual
About this manual
• This manual mainly explains operations
using the remote, but the same operations can
also be performed using the buttons on the
DVD-VCR having the same or similar
names.
also be performed using the buttons on the
DVD-VCR having the same or similar
names.
• “DVD” may be used as a general term for
DVD VIDEOs, DVD+RWs/DVD+Rs, and
DVD-RWs/DVD-Rs.
DVD-RWs/DVD-Rs.
• The meaning of the icons used in this manual
is described below:
* MP3 (MPEG 1 Audio Layer 3) is a standard format
defined by ISO/MPEG which compresses audio data.
This player can play the
following discs
following discs
“DVD+RW,” “DVD-RW,” “DVD+R,”
“DVD+R DL,” “DVD-R,” “DVD VIDEO,” and
“CD” logos are trademarks.
“DVD+R DL,” “DVD-R,” “DVD VIDEO,” and
“CD” logos are trademarks.
The player can play CD-ROMs/CD-Rs/CD-RWs
recorded in the following formats:
recorded in the following formats:
– music CD format
– video CD format
– MP3 audio tracks and JPEG image files of
– video CD format
– MP3 audio tracks and JPEG image files of
format conforming to ISO 9660* Level 1/
Level 2, or its extended format, Joliet
Level 2, or its extended format, Joliet
– KODAK Picture CD format
* A logical format of files and folders on CD-ROMs,
defined by ISO (International Organization for
Standardization).
Standardization).
The player can play DVD-ROMs/DVD+RWs/
DVD+Rs/DVD-RWs/DVD-Rs recorded in the
following formats:
DVD+Rs/DVD-RWs/DVD-Rs recorded in the
following formats:
– MP3 audio tracks and JPEG image files of
format conforming to UDF (Universal Disk
Format).
Format).
– 8 cm DVD+RW, DVD-RW, and DVD-R
recorded with a DVD Video camera.
Icon
Meaning
Functions available for DVD
VIDEOs and DVD-RWs/DVD-
Rs in video mode or
DVD+RWs/DVD+Rs
VIDEOs and DVD-RWs/DVD-
Rs in video mode or
DVD+RWs/DVD+Rs
Functions available for DVD-
RWs/DVD-Rs in VR (Video
Recording) mode
RWs/DVD-Rs in VR (Video
Recording) mode
Functions available for VIDEO
CDs, Super VCDs or CD-Rs/
CD-RWs in video CD format or
Super VCD format
CDs, Super VCDs or CD-Rs/
CD-RWs in video CD format or
Super VCD format
Functions available for music
CDs or CD-Rs/CD-RWs in music
CD format
CDs or CD-Rs/CD-RWs in music
CD format
Functions available for DATA
CDs (CD-ROMs/CD-Rs/CD-
RWs containing MP3* audio
tracks or JPEG files)
CDs (CD-ROMs/CD-Rs/CD-
RWs containing MP3* audio
tracks or JPEG files)
Functions available for DATA
DVDs (DVD-ROMs/DVD+RWs/
DVD+Rs/DVD-RWs/DVD-Rs
containing MP3* audio tracks or
JPEG files)
DVDs (DVD-ROMs/DVD+RWs/
DVD+Rs/DVD-RWs/DVD-Rs
containing MP3* audio tracks or
JPEG files)
Functions available for VHS
VIDEOs
VIDEOs
Format of discs
Note about CDs/DVDs
DVD VIDEO
DVD-RW/-R
DVD+RW/+R
VIDEO CD/
Music CD
Music CD
CD-RW/-R
7
This player can play the following discs
Your player has a region code printed on the
back of the unit and only will play DVD VIDEO
discs (playback only) labelled with identical
region codes. This system is used to protect
copyrights.
back of the unit and only will play DVD VIDEO
discs (playback only) labelled with identical
region codes. This system is used to protect
copyrights.
DVDs labelled
will also play on this
player.
If you try to play any other DVD VIDEO, a
message will appear on the TV screen to indicate
that the disc is not playable. Depending on the
DVD VIDEO, no region code indication may be
labelled even though playing the DVD VIDEO
is prohibited by area restrictions.
message will appear on the TV screen to indicate
that the disc is not playable. Depending on the
DVD VIDEO, no region code indication may be
labelled even though playing the DVD VIDEO
is prohibited by area restrictions.
The player cannot play the following discs:
• CD-ROMs/CD-Rs/CD-RWs other than those
• CD-ROMs/CD-Rs/CD-RWs other than those
recorded in the formats listed on the previous
page.
page.
• CD-ROMs recorded in PHOTO CD format.
• Data part of CD-Extras
• DVD Audios
• HD layer on Super Audio CDs
• DVD-RAMs
• Data part of CD-Extras
• DVD Audios
• HD layer on Super Audio CDs
• DVD-RAMs
Also, the player cannot play the following discs:
• A DVD VIDEO with a different region code.
• A disc that has a non-standard shape (e.g.,
• A DVD VIDEO with a different region code.
• A disc that has a non-standard shape (e.g.,
card, heart).
• A disc with paper or stickers on it.
• A disc that has the adhesive of cellophane tape
• A disc that has the adhesive of cellophane tape
or a sticker still left on it.
Some DVD+RWs/DVD+Rs, DVD-RWs/DVD-
Rs, or CD-Rs/CD-RWs cannot be played on this
player due to the recording quality or physical
condition of the disc, or the characteristics of the
recording device and authoring software.
The disc will not play if it has not been correctly
finalized. For more information, refer to the
operating instructions for the recording device.
Note that some playback functions may not
work with some DVD+RWs/DVD+Rs, even if
they have been correctly finalized. In this case,
view the disc by normal playback. Also some
DATA CDs/DATA DVDs created in Packet
Write format cannot be played.
Rs, or CD-Rs/CD-RWs cannot be played on this
player due to the recording quality or physical
condition of the disc, or the characteristics of the
recording device and authoring software.
The disc will not play if it has not been correctly
finalized. For more information, refer to the
operating instructions for the recording device.
Note that some playback functions may not
work with some DVD+RWs/DVD+Rs, even if
they have been correctly finalized. In this case,
view the disc by normal playback. Also some
DATA CDs/DATA DVDs created in Packet
Write format cannot be played.
Some playback operations of DVDs and VIDEO
CDs may be intentionally set by software
producers. Since this player plays DVDs and
VIDEO CDs according to the disc contents the
software producers designed, some playback
features may not be available. Also, refer to the
instructions supplied with the DVDs or VIDEO
CDs.
CDs may be intentionally set by software
producers. Since this player plays DVDs and
VIDEO CDs according to the disc contents the
software producers designed, some playback
features may not be available. Also, refer to the
instructions supplied with the DVDs or VIDEO
CDs.
This product is designed to playback discs that
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with
copyright protection technologies are marketed
by some record companies. Please be aware that
among those discs, there are some that do not
conform to the CD standard and may not be
playable by this product.
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with
copyright protection technologies are marketed
by some record companies. Please be aware that
among those discs, there are some that do not
conform to the CD standard and may not be
playable by this product.
Region code
Example of discs that the
player cannot play
player cannot play
ALL
NO.
X
DVD PLAYER/
VIDEO CASSETTE RECORDER
MODEL NO. SLV-DXXXX
VIDEO CASSETTE RECORDER
MODEL NO. SLV-DXXXX
~AC 220–240V 50Hz 20W
Region code
Notes about DVD+RWs/
DVD+Rs, DVD-RWs/DVD-Rs or
CD-Rs/CD-RWs
DVD+Rs, DVD-RWs/DVD-Rs or
CD-Rs/CD-RWs
Note on playback operations
of DVDs and VIDEO CDs
of DVDs and VIDEO CDs
Music discs encoded with
copyright protection
technologies
copyright protection
technologies
continued
8
Notes about discs
A DualDisc is a two sided disc product which
mates DVD recorded material on one side with
digital audio material on the other side.
However, since the audio material side does not
conform to the Compact Disc (CD) standard,
playback on this product is not guaranteed.
mates DVD recorded material on one side with
digital audio material on the other side.
However, since the audio material side does not
conform to the Compact Disc (CD) standard,
playback on this product is not guaranteed.
Notes about discs
• To keep the disc clean, handle the disc by its
edge. Do not touch the surface.
• Do not expose the disc to direct sunlight or
heat sources such as hot air ducts, or leave it in
a car parked in direct sunlight as the
temperature may rise considerably inside the
car.
a car parked in direct sunlight as the
temperature may rise considerably inside the
car.
• After playing, store the disc in its case.
• Clean the disc with a cleaning cloth.
• Clean the disc with a cleaning cloth.
Wipe the disc from the centre out.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, or anti-static
spray intended for vinyl LPs.
spray intended for vinyl LPs.
• If you have printed the disc’s label, dry the
label before playing.
Note on DualDiscs
Getti
ng Sta
rted
9
Unpacking
Getting Started
Step 1 : Unpacking
Check that you have received the following items with the DVD-VCR:
Note
• The supplied remote commander is for the exclusive use of this DVD-VCR.
• Remote commander
• Aerial cable
• R6 (size AA) batteries
SLV-D973P E/D983P D/D983P GI
1-2
10
Setting up the remote commander
Step 2 : Setting up the remote commander
Inserting the batteries
Insert two R6 (size AA) batteries by
matching the + and – on the batteries to the
diagram inside the battery compartment.
matching the + and – on the batteries to the
diagram inside the battery compartment.
Insert the negative (–) end first, then push in
and down until the positive (+) end clicks
into position.
and down until the positive (+) end clicks
into position.
Reattach the cover after inserting the battery.
Using the remote commander
You can use this remote commander to
operate this DVD-VCR and a Sony TV.
Buttons on the remote commander marked
with a dot (•) can be used to operate your
Sony TV.
If the TV does not have the
operate this DVD-VCR and a Sony TV.
Buttons on the remote commander marked
with a dot (•) can be used to operate your
Sony TV.
If the TV does not have the
symbol near
the remote sensor, this remote commander
will not operate the TV.
will not operate the TV.
To operate
Set TV / DVD·VIDEO switch to
the DVD player
DVD·VIDEO, then press SELECT DVD and point at the remote sensor at the
DVD-VCR
DVD-VCR
the VCR
DVD·VIDEO, then press SELECT VIDEO and point at the remote sensor at the
DVD-VCR
DVD-VCR
your TV
TV and point at the remote sensor at your TV
Remote sensor
TV / DVD·VIDEO
switch
switch
SELECT VIDEO
SELECT DVD
Getti
ng Sta
rted
11
Setting up the remote commander
Notes
• With normal use, the batteries should last about three to six months.
• If you do not use the remote commander for an extended period of time, remove the batteries
• If you do not use the remote commander for an extended period of time, remove the batteries
to avoid possible damage from battery leakage.
• Do not use a new battery with an old one.
• Do not use different types of batteries.
• Do not leave the remote commander in an extremely hot or humid place.
• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so
• Do not use different types of batteries.
• Do not leave the remote commander in an extremely hot or humid place.
• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so
may cause a malfunction.
The remote commander is preprogrammed to control non-Sony TVs. If your TV is listed in the
following table, set the appropriate manufacturer’s code number.
following table, set the appropriate manufacturer’s code number.
Now you can use the buttons with an orange dot (•) to control your TV.
When the TV / DVD·VIDEO switch is set to TV, the remote performs the following:
When the TV / DVD·VIDEO switch is set to TV, the remote performs the following:
* for Sony TV only
Controlling TVs with the remote commander
1
Set TV / DVD·VIDEO switch at the top of the remote commander to TV.
2
Hold down
?/1, and enter your TV’s code number using the number buttons. Then release
?/1.
Buttons
Operations
?/1
Turns your TV on or off
VOL +/–
Adjusts the volume of your TV
PROG +/–
Selects the channel on your TV
Number buttons and
-/--
*
Selects the channel on a Sony TV
MUTING*
Mutes a Sony TV equipped with the muting function
TV/VIDEO
Switches your TV’s input source
continued
12
Setting up the remote commander
Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until you find
the one that works with your TV.
the one that works with your TV.
Notes
• If you enter a new code number, the code number previously entered will be erased.
• If the TV uses a different remote control system from the one programmed to work with the
• If the TV uses a different remote control system from the one programmed to work with the
DVD-VCR, you cannot control your TV with the remote commander.
• When you replace the batteries of the remote commander, the code number may change. Set
the appropriate code number every time you replace the batteries.
Manufacturer
Code number
Sony
01 (default), 02
Akai
68
Ferguson
52
Grundig
10, 11
Hitachi
24
JVC
33
Loewe
45
Mivar
09, 70
NEC
66
Nokia
15, 16, 69
Panasonic
17, 49
Philips
06, 07, 08
Saba
12, 13
Samsung
22, 23
Sanyo
25
Sharp
29
Telefunken
36
Thomson
43
Toshiba
38
Manufacturer
Code number
Getti
ng Sta
rted
13
Connecting the DVD-VCR
Step 3 : Connecting the DVD-VCR
For connecting the DVD-VCR, antenna and your TV, select one of the following patterns
A or B, according to the input jack on your TV.
Tip
• “Advanced Hookups” (page 27) explains additional hookup methods that will optimize the
picture and sound for a true “hometheatre” experience.
Note
• You cannot connect the DVD-VCR to a TV that does not have a SCART or video input jack.
A
Use this hookup if your TV has an audio/video connector
1
Disconnect the aerial cable from your TV and
connect it to
connect it to
on the rear panel of the DVD-
VCR.
2
Connect
of the DVD-VCR and the aerial
input of your TV using the supplied aerial
cable.
cable.
3
Connect OUT AUDIO L/R VIDEO jacks of
the DVD-VCR and audio/video connector of
your TV using an audio/video cord.
the DVD-VCR and audio/video connector of
your TV using an audio/video cord.
4
Connect the mains lead to the mains.
If you connect additional equipments to the DVD-VCR (page 15, 27, 29), be
sure to connect the mains lead after all connections are completed.
sure to connect the mains lead after all connections are completed.
Mains lead
AERIAL IN
to mains
Aerial cable (supplied)
: Signal flow
Audio/video cord
(not supplied)
(not supplied)
Audio/video
inputs
continued
Click on the first or last page to see other SLV-D973PE / SLV-D983PD / SLV-D983PGI service manuals if exist.