Sony SLV-D940PAZ / SLV-D940PEA / SLV-D940PME Service Manual ▷ View online
5-24
5-23
5-11 DVD A/V
5-26
5-25
5-12 DVD decoder Servo
6-1
6. ALIGNMENT AND ADJUSTMENTS
6-1 VCR ADJUSTMENT
6-1-1 Reference
1) X-Point (Tracking center) adjustment, “Head switching adjustment” and “NVRAM option setting” can be adjusted with remote control.
2) When replacing the Main PCB Micom (IC601) and NVRAM (IC605: EEPROM) be sure to adjust the “Head switching adjustment” and
“NVRAM option setting”.
3) When replacing the cylinder ass’y, be sure to adjust the “X-Point” and “Head switching adjustment”.
4) How to adjustment.
- Intermittently short-circuit the Test Point on Main PCB with pincers to the adjustment mode.
- If the corresponding adjustment button is pressed, the adjustment is performed automatically.
- When the adjustment is completed, be sure to turn the power off.
6-1-1(a) Location of adjustment button of remote control
SLV-D940P AZ/D940P EA/D940P ME
Fig. 6-1
6-2
TEST
TEST BUTTON
6-1-1(b) TEST location for adjustment mode setting
Fig. 6-2 VCR Main PCB (Top View)
Click on the first or last page to see other SLV-D940PAZ / SLV-D940PEA / SLV-D940PME service manuals if exist.