Sony SLV-D920B / SLV-D920E / SLV-D920N / SLV-D920R / SLV-D925E / SLV-D930D / SLV-D930GI / SLV-D960PB / SLV-D960PE Service Manual ▷ View online
1-15
64
Parental Control (limiting playback by children)
3
Press
b to select “Yes.”
• If you have not entered a password
The display for registering a new password
appears.
Enter a 4-digit password using the number
buttons.
appears.
Enter a 4-digit password using the number
buttons.
The display for confirming the password
appears.
Re-enter the password.
appears.
Re-enter the password.
• When you have already registered a
password
The display for entering the password appears.
Enter a 4-digit password using the number
buttons.
After registering a password, if you set “Use
password” to “No,” “PASSWORD CHECK”
screen will not appear.
Enter a 4-digit password using the number
buttons.
After registering a password, if you set “Use
password” to “No,” “PASSWORD CHECK”
screen will not appear.
4
Press
V/v to select “Rating Level,” then press
ENTER.
5
Press
V/v to select the level you want, then
press ENTER.
The options are as follows.
Level 8 (Adult)
y Level 7 y Level 6 y
Level 5
y Level 4 y Level 3 y Level 2
y Level 1 (Kids Safe)
The lower the value, the stricter the limitation.
6
Press SET UP to exit the menu.
ENTER
1
2
3
4
5
6
7
8
9
0
Enter Password
– – – –
CREATE PASSWORD
-
~
9
RETURN
CREATE PASSWORD
-
~
9
RETURN
Re-enter Password
– – – –
PASSWORD CHECK
-
~
9
RETURN
Enter Password
– – – –
Use Password
RETURN
PARENTAL SETUP
SET UP
[ Yes ]
v
V
b
B
Rating Level
Change Password
Change Password
:1
ENTER
RETURN
RATING LEVEL
SET UP
ENTER
V
Level 8 Adult
Level 7
Level 6
Level 5
Level 4
Level 3
Level 7
Level 6
Level 5
Level 4
Level 3
Level 2
Level 1 Kids Safe
Level 1 Kids Safe
v
ENTER
RETURN
RATING LEVEL
SET UP
ENTER
Level 8 Adult
Level 7
Level 6
Level 5
Level 4
Level 3
Level 7
Level 6
Level 5
Level 4
Level 3
Level 2
Level 1 Kids Safe
Level 1 Kids Safe
V v
SET UP
65
Parental Control (limiting playback by children)
DV
D
D
Se
ttings
ttings
and
Adjus
tme
n
ts
To change the password
To turn off the Parental Control function
Set “Use Password” to “No” in step 3 on page 64.
To play a disc for which Parental Control is set
If you forget your password
Notes
• When you play DVDs which do not have the Parental Control function, playback cannot be
• When you play DVDs which do not have the Parental Control function, playback cannot be
limited on this player.
• All the ratings higher than the level you select will be blocked.
• Write your password down and keep it in a safe place in case you forget it.
• All DVD settings below which you set in the “DVD SETUP” menu will also be cleared when
• Write your password down and keep it in a safe place in case you forget it.
• All DVD settings below which you set in the “DVD SETUP” menu will also be cleared when
you reset the DVD-VCR to clear the password setting.
– Language Setup
– Audio Setup
– Screen Setup
– Parental Setup
– Language Setup
– Audio Setup
– Screen Setup
– Parental Setup
1
Select “Change Password” in step 4 on page 64.
The display for entering a new password appears.
The display for entering a new password appears.
2
Enter a new 4-digit password using the number buttons.
The display for confirming the password appears.
The display for confirming the password appears.
3
Re-enter the new password.
1
Insert the disc, then press
H.
The display for entering your password appears.
2
Enter your 4-digit password using the number buttons.
The player starts playback.
The player starts playback.
1
Remove the disc and turn off the DVD-VCR
.
2
Turn on the DVD-VCR again with no disc in the unit.
3
Hold down
m and M on the front panel simultaneously for 5 seconds.
“Reset OK” appears on the screen.
4
Turn off the DVD-VCR.
The password is cleared.
The password is cleared.
5
To create a new password, follow step 3 on page 64.
66
Using the DVD’s menu
DVD Additional Operations
Using the DVD’s menu
A DVD is divided into long sections of a
picture or a music feature called “titles.”
When you play a DVD which contains
several titles, you can select the title you
want using the TOP MENU button.
picture or a music feature called “titles.”
When you play a DVD which contains
several titles, you can select the title you
want using the TOP MENU button.
When you play DVDs that allow you to
select items such as the language for the
subtitles and the language for the sound,
select these items using the MENU button.
select items such as the language for the
subtitles and the language for the sound,
select these items using the MENU button.
1
Press TOP MENU or MENU
.
The disc’s menu appears on the TV screen.
The contents of the menu vary from disc to disc.
2
Press
V/v/B/b to select the item you want to play or change.
You can also use the number buttons to select the item. In this case, step 3
is skipped.
is skipped.
Number
buttons
buttons
V/v/B/b
ENTER
ENTER
MENU
TOP
MENU
MENU
x
TOP MENU
MENU
ENTER
1
2
3
4
5
6
7
8
9
0
67
Using the DVD’s menu
DV
D Ad
D Ad
diti
onal
O
p
p
eratio
ns
To turn off the DVD’s menu
Press
x.
Note
• Depending on the DVD, you may not be able to use the TOP MENU button or search a point
• Depending on the DVD, you may not be able to use the TOP MENU button or search a point
by setting the time.
3
Press ENTER.
ENTER
1-16
68
Zooming into a scene
Zooming into a scene
Notes
You cannot use 4
×
magnification when you play VIDEO CDs.
The zoom function may not work depending on the DVD.
You can zoom into a scene during playback
or still mode.
To zoom into a JPEG image, see “Playing
JPEG image files” on page 84.
or still mode.
To zoom into a JPEG image, see “Playing
JPEG image files” on page 84.
1
Press ZOOM.
“
” appears.
2
Press
to move “
” to the position where you want to zoom in.
3
Press ENTER repeatedly to change the magnification.
Each time you press the button, the magnification changes as shown below.
2
×
4
×
2
×
normal magnification
ZOOM
ENTER
MUTING/
ZOOM
ENTER
ENTER
69
Changing the angles
DV
D Ad
D Ad
diti
onal
O
p
p
eratio
ns
Changing the angles
Note
• Check the user’s manual of the purchased disc to determine whether it supports angle
• Check the user’s manual of the purchased disc to determine whether it supports angle
operation. However, note that angle operation may not be possible for some discs.
If various angles (multi-angles) for a scene
are recorded on the DVD, “
are recorded on the DVD, “
” appears in
the display when you press ANGLE during
playback. This means that you can change
the viewing angle.
playback. This means that you can change
the viewing angle.
1
Press ANGLE during playback.
The angle number appears on the display.
The number after the slash indicates the total
number of angles.
number of angles.
2
Press
B/b repeatedly or use the number buttons to select the angle number.
The scene changes to the selected angle.
ANGLE
B/b
ANGLE
ENTER
1
2
3
4
5
6
7
8
9
0
70
Displaying the subtitle
Displaying the subtitle
To turn off the subtitles
Select “Off” in step 3.
Note
• Depending on the DVD, you may not be able to change the subtitles even if multilingual
• Depending on the DVD, you may not be able to change the subtitles even if multilingual
subtitles are recorded on the DVD. You also may not be able to turn them off.
If subtitles are recorded on the disc, you can
change the subtitles or turn them on and off
whenever you want while playing a DVD.
change the subtitles or turn them on and off
whenever you want while playing a DVD.
1
Press SUBTITLE during playback.
2
Press
B/b repeatedly to select the language.
Depending on the DVD, the choice of language varies.
Refer to “DVD Audio/Subtitle Language” on page 119 for the abbreviation
of the language.
Refer to “DVD Audio/Subtitle Language” on page 119 for the abbreviation
of the language.
3
Press
V/v repeatedly to select “On.”
SUBTITLE
V/v/B/b
SUBTITLE/
TIMER
ENTER
ENTER
71
Various play mode functions (Programme play, Shuffle play, Repeat play)
DV
D Ad
D Ad
diti
onal
O
p
p
eratio
ns
Various play mode functions
(Programme
play, Shuffle play, Repeat play)
You can set the following play modes:
• Programme play (page 71), Programme play MP3 audio tracks (page 81)
• Shuffle play (page 73), Shuffle play MP3 audio tracks (page 82)
• Repeat play (page 74)
Note
• The play mode is cancelled when:
• The play mode is cancelled when:
– you open the disc tray
– the player enters standby mode by pressing
– the player enters standby mode by pressing
[/1.
Creating your own programme (Programme play)
You can play the contents of a disc in the
order you want by arranging the order of the
tracks on the disc to create your own
programme. You can programme up to 20
tracks.
order you want by arranging the order of the
tracks on the disc to create your own
programme. You can programme up to 20
tracks.
To programme MP3 audio tracks, see
page 81.
page 81.
1
Press REPEAT when the DVD player is in stop
mode.
mode.
H
V/v/B/b
ENTER
ENTER
CLEAR
REPEAT
REPEAT/
INDEX
PROGRAM
SHUFFLE
continued
1-17
72
Various play mode functions (Programme play, Shuffle play, Repeat play)
To stop programme play
Press CLEAR until “Off” appears at the upper left top of the TV screen during
programme play.
programme play.
To change or cancel a programme
To cancel all the programmed numbers
Notes
• Up to 99 tracks can be displayed.
• Up to 20 tracks can be programmed at one time.
• Up to 99 tracks can be displayed.
• Up to 20 tracks can be programmed at one time.
2
Press
B/b to select “PROGRAM,” then press
ENTER.
3
Press
V/v/B/b to select the track number you
want to programme, then press ENTER.
4
To programme other tracks, repeat step 3.
The programmed track numbers are displayed in the selected order.
5
Press
H to start programme play.
Programme play starts.
When the programme ends, you can restart the same programme again by
pressing
pressing
H.
1
Follow steps 1 and 2 of “Creating your own programme (Programme play).”
2
Press
v repeatedly to select “Clear last track,” then press ENTER. Each time you
press the button, the last programmed number is canceled. You can also cancel
the last programmed number by pressing CLEAR.
the last programmed number by pressing CLEAR.
3
Follow step 3 for new programming.
1
Follow steps 1 and 2 of “Creating your own programme (Programme play).”
2
Press
v repeatedly to select “Clear last track,” then press b to select “Clear all
tracks” and press ENTER.
All the programmed numbers are canceled.
ENTER
01
05
09
13
17
09
13
17
02
06
10
14
18
06
10
14
18
03
07
11
15
19
07
11
15
19
04
08
12
16
20
08
12
16
20
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
Track
Program Order
PROGRAM
RETURN
CLEAR
Clear last track
Clear all tracks
v
V
b
B
B
ENTER
ENTER
01
05
09
13
17
05
09
13
17
02
06
10
14
18
14
18
03
07
11
15
19
07
11
15
19
04
08
12
16
20
08
12
16
20
0 6
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
Track
Program Order
PROGRAM
RETURN
CLEAR
v
V
b
B
Clear last track
Clear all tracks
B
ENTER
73
Various play mode functions (Programme play, Shuffle play, Repeat play)
DV
D Ad
D Ad
diti
onal
O
p
p
eratio
ns
Playing in random order (Shuffle play)
To return to normal play
Press CLEAR until “Off” appears at the upper left top of the TV screen during shuffle
play.
play.
Tips
• Shuffle play will stop when all the tracks are played back.
• You cannot repeat play while in shuffle play.
• Shuffle play will stop when all the tracks are played back.
• You cannot repeat play while in shuffle play.
You can shuffle the playback order of tracks.
Subsequent “shuffling” may produce a
different playing order.
Subsequent “shuffling” may produce a
different playing order.
To shuffle MP3 audio tracks, see page 82.
1
Press REPEAT when the DVD player is in stop
mode.
mode.
2
Press
B/b to select “SHUFFLE,” then press
ENTER.
B/b
ENTER
ENTER
REPEAT
CLEAR
REPEAT/
INDEX
PROGRAM
SHUFFLE
ENTER
PROGRAM
SHUFFLE
continued
74
Various play mode functions (Programme play, Shuffle play, Repeat play)
Playing repeatedly (Repeat play)
To return to normal play
Select “Off” in step 2 or press CLEAR during repeat play.
You can play all of the titles or tracks on a
disc or a single title, chapter, or track
repeatedly.
disc or a single title, chapter, or track
repeatedly.
1
Press REPEAT during playback.
2
Press REPEAT or
B/b to select the item to be repeated.
When playing a DVD
• Chapter: repeats the current chapter.
• Title: repeats the current title on a disc.
When playing a VIDEO CD (with PBC function off) or CD
• Track: repeats the current track.
• Disc: repeats all of the tracks.
When playing a DATA CD (MP3 audio)
• FILE: repeats the current file (track).
• DIR: repeats the current directory (album).
• DISC: repeats the current disc.
REPEAT
CLEAR
B/b
REPEAT/
INDEX
Off
REPEAT/
INDEX
75
Various play mode functions (Programme play, Shuffle play, Repeat play)
DV
D Ad
D Ad
diti
onal
O
p
p
eratio
ns
Tip
• When playing a DATA CD, press REPEAT again to cancel repeat play.
• When playing a DATA CD, press REPEAT again to cancel repeat play.
Notes
• You cannot repeat play with DVD-RW in VR mode.
• You cannot repeat play VIDEO CDs with PBC function on. See “Playing VIDEO CDs with
• You cannot repeat play with DVD-RW in VR mode.
• You cannot repeat play VIDEO CDs with PBC function on. See “Playing VIDEO CDs with
“PBC On/Off” functions” on page 88.
1-18
76
Changing the sound
Changing the sound
When playing a DVD recorded in multiple
audio formats (PCM, Dolby Digital, MPEG
or DTS), you can change the audio format. If
the DVD is recorded with multilingual
tracks, you can also change the language.
audio formats (PCM, Dolby Digital, MPEG
or DTS), you can change the audio format. If
the DVD is recorded with multilingual
tracks, you can also change the language.
With CDs, DATA CDs, or VIDEO CDs, you
can select the sound from the right or left
channel and listen to the sound of the
selected channel through both the right and
left speakers. For example, when playing a
Karaoke VIDEO CD containing a song with
the vocals on the right channel and the
instruments on the left channel, you can hear
the instruments from both speakers by
selecting the left channel.
can select the sound from the right or left
channel and listen to the sound of the
selected channel through both the right and
left speakers. For example, when playing a
Karaoke VIDEO CD containing a song with
the vocals on the right channel and the
instruments on the left channel, you can hear
the instruments from both speakers by
selecting the left channel.
To enjoy Dolby Digital or DTS effect from a
LinearPCM format disc, you have to make
the
LinearPCM format disc, you have to make
the
connection as shown on page 53.
1
Press AUDIO during playback.
2
Press
B/b repeatedly to select the desired language/audio setting.
• When playing a DVD
Depending on the DVD, the choice of language varies.
Refer to “DVD Audio/Subtitle Language” on page 119 for the
abbreviation of the language.
Refer to “DVD Audio/Subtitle Language” on page 119 for the
abbreviation of the language.
• When playing a VIDEO CD or CD
The default setting is indicated in bold print.
B-2
AUDIO
B/b
AUDIO
ENG DOLBY DIGITAL 3/2.1CH 1/2
b
B
ENTER
STEREO
The standard stereo sound
Left
The sound of the left channel (monaural)
Right
The sound of the right channel (monaural)
77
Virtual surround setting
DV
D Ad
D Ad
diti
onal
O
p
p
eratio
ns
Virtual surround setting
When you connect a stereo TV or 2 front
speakers, SURROUND lets you enjoy
surround sound effects by using sound
imaging to create virtual rear speakers from
the sound of the front speakers without using
actual rear speakers.
speakers, SURROUND lets you enjoy
surround sound effects by using sound
imaging to create virtual rear speakers from
the sound of the front speakers without using
actual rear speakers.
1
Press SURROUND during playback.
2
Press
B/b repeatedly to select “Surround1,” “Surround2,” “Surround3.”
Surround effect increases as shown below.
SURROUND
B/b
SURROUND
Off
ENTER
TV
TV
TV
Surround1
Surround2
Surround3
: Virtual speaker
continued
78
Virtual surround setting
To cancel the setting
Select “Off” in step 2.
Notes
• When the playing signal does not contain a signal for the rear speakers, the surround effects
• When the playing signal does not contain a signal for the rear speakers, the surround effects
will be difficult to hear.
• When you activate the surround effect, turn off the surround setting of the connected TV or
amplifier (receiver).
• Make sure that your listening position is between and at an equal distance from your
speakers, and that the speakers are located in similar surroundings.
• If you use the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack and set “Dolby
Digital” to “Dolby Digital” or “DTS” to “On” in “AUDIO SETUP” menu, sound will come
from your speakers but it will not have the surround effect.
from your speakers but it will not have the surround effect.
79
Playing an MP3 audio track
DV
D Ad
D Ad
diti
onal
O
p
p
eratio
ns
Playing an MP3 audio track
You can play back DATA CDs (CD-ROMs/
CD-Rs/CD-RWs) recorded in MP3 (MPEG1
Audio Layer 3) format.
CD-Rs/CD-RWs) recorded in MP3 (MPEG1
Audio Layer 3) format.
1
Press
Z and place a DATA CD on the disc tray,
then press
Z to close the tray.
When you load a DATA CD which contains
MP3 audio tracks and JPEG image files,
“Select a Media Type” menu appears.
MP3 audio tracks and JPEG image files,
“Select a Media Type” menu appears.
If you load a DATA CD which contains only
MP3 audio files, the MP3 display appears.
Then you can skip step 2.
MP3 audio files, the MP3 display appears.
Then you can skip step 2.
V/v/B/b
ENTER
ENTER
H
O RETURN
Z
REPEAT
x
TOP MENU
Select a Media Type
2 JPEG
1 MP3
ENTER
v
V
continued
Click on the first or last page to see other SLV-D920B / SLV-D920E / SLV-D920N / SLV-D920R / SLV-D925E / SLV-D930D / SLV-D930GI / SLV-D960PB / SLV-D960PE service manuals if exist.