Sony SLV-D360P / SLV-D560P Service Manual ▷ View online
1-23
94
Playing an MP3 audio track
The Playback order of MP3 audio tracks
The playback order of albums and tracks recorded on a DATA CD or DATA DVD is
as follows.
as follows.
• Structure of disc contents
When you insert a DATA CD or DATA DVD and press
H PLAY, the numbered
tracks are played sequentially, from
1
through
7
. Any sub-albums/tracks contained
within a currently selected album does not take priority over the next album in the
same tree. (Example:
same tree. (Example:
E contains G but 6 is played before
7
.)
When you press
O RETURN and the list of MP3 albums appears (page 91), the
albums are arranged in the following order:
A t B t D t E t F t G.
Albums that do not contain tracks (such as album
C) do not appear in the list.
Tips
• If you add numbers (01, 02, 03, etc.) to the front of the track file names, the tracks will be
played in that order.
• A disc with many trees takes longer to start playback. Some discs with many trees cannot be
played back.
Notes
• Depending on the software you use to create the DATA CD or DATA DVD, the playback
order may differ from the illustration above.
• The playback order above may not be applicable if there are more than a total of 1000 albums
and tracks in the DATA CD or DATA DVD.
• A total of up to 999 files can be recognized for discs that contain both MP3 and JPEG files.
Files are recognized in the order that they were recorded. For example, if 990 JPEG files are
recorded then 100 MP3 files are recorded, the 990 JPEG files recorded first and only the first
9 MP3 files can be recognized.
recorded then 100 MP3 files are recorded, the 990 JPEG files recorded first and only the first
9 MP3 files can be recognized.
• Depending on the disc contents, playback may take some time to start.
Tree 1
Tree 2
Tree 3
Tree 4
Tree 5
album
track
95
Playing JPEG image files
DV
D Ad
D Ad
diti
onal
O
p
p
eratio
ns
Playing JPEG image files
You can play JPEG image files on DATA CDs
(CD-ROMs/CD-Rs/CD-RWs) or DATA DVDs
(DVD-ROMs/DVD+RWs/DVD+Rs/DVD-
RWs/DVD-Rs).
(CD-ROMs/CD-Rs/CD-RWs) or DATA DVDs
(DVD-ROMs/DVD+RWs/DVD+Rs/DVD-
RWs/DVD-Rs).
1
Press
Z and place a DATA CD or DATA DVD
on the disc tray, then press
Z to close the tray.
When you load a DATA CD or DATA DVD
which contains MP3 audio tracks and JPEG
image files, “Select a Media Type” menu
appears.
which contains MP3 audio tracks and JPEG
image files, “Select a Media Type” menu
appears.
If you load a DATA CD or DATA DVD which
contains only JPEG image files, the “Album” display appears. Then you
can skip step 2.
contains only JPEG image files, the “Album” display appears. Then you
can skip step 2.
V/v/B/b
ENTER
H
PLAY
Z
TOP MENU
./ >
DISPLAY
x
STOP
MENU
Select a Media Type
2 JPEG
1 MP3
ENTER
v
V
continued
96
Playing JPEG image files
To rotate the selected image
2
Press
V/v to select “JPEG”, then press
ENTER.
The “Album” display will appears.
If you do not press ENTER after selecting a
media type, the selected media will be
automatically played.
media type, the selected media will be
automatically played.
3
Press
./> to select the next/previous album page, then press V/v/
B/b to select an image in the “Album” display.
To display the selected image
1
Press ENTER.
The selected image number appears in the
display window.
The selected image number appears in the
display window.
2
To display the next/previous image, press
./>.
To play the Slide show
1
Press
H PLAY.
You can also play the Slide show using the
menu on the selected image.
For details, see “To enjoy the Slide show”
on page 97.
menu on the selected image.
For details, see “To enjoy the Slide show”
on page 97.
2
Press
B/b to select the desired playing
speed on the “Interval” menu, then press
ENTER.
Slide show starts from the selected image.
ENTER.
Slide show starts from the selected image.
1
Press
V/v/B/b to select an image in the “Album”
display, then press ENTER.
2
Press
B/b to select “
”, then press ENTER.
Each time you press ENTER, the image turns
clockwise by 90°.
clockwise by 90°.
Album
Photo:
SLIDE SHOW
IMAGE
Interval
IMAGE
: Fast
: Normal
: Slow
IMAGE
97
Playing JPEG image files
DV
D Ad
D Ad
diti
onal
O
p
p
eratio
ns
To zoom in an image
Note
• You cannot use ZOOM on the remote in JPEG image files on DATA CD/DATA DVD.
To enjoy the Slide show
To turn on/off the menu in the single image display
Press CLEAR to turn off the menu. Press
B or b to turn on the menu.
To return to the “Album” display
Press MENU to return to the “Album” display. Press
. repeatedly to return to the
first “Album” page.
To return to the “Select a Media Type” menu
Press
x STOP twice, then press TOP MENU.
Notes
• Slide show can play in only one direction.
• You cannot rotate or zoom in the image during Slide show.
• If you select
• You cannot rotate or zoom in the image during Slide show.
• If you select
“
”
in the rotated image display, the images in the “Album” display will not
be rotated. But if you start the slide show, the images will be rotated. Correct the rotation in
the
the
“
”
menu.
1
Press
V/v/B/b to select an image in the “Album”
display, then press ENTER.
2
Press
B/b to select “
”, then press ENTER.
“
” appears.
3
Press
V/v/B/b to move “
” to the position
where you want to zoom in.
4
Press ENTER repeatedly to change the
magnification. Each time you press ENTER, the
magnification changes as shown below.
magnification. Each time you press ENTER, the
magnification changes as shown below.
2
× t normal magnification
1
Press
V/v/B/b to select an image in the “Album”
display, then press ENTER.
2
Press
B/b to select “
”, then press ENTER.
The “Interval” menu appears.
3
Press
B/b to select the desired play speed, then press
ENTER.
Slide show starts.
IMAGE
Interval
IMAGE
continued
1-24
98
Playing JPEG image files
About JPEG image files
You can play back DATA CDs (CD-ROMs/CD-Rs/CD-RWs) or DATA DVDs (DVD-
ROMs/DVD+RWs/DVD+Rs/DVD-RWs/DVD-Rs) recorded in JPEG format.
However, the discs must be recorded according to ISO9660 Level 1/Level 2 or Joliet
format and DATA DVDs of Universal Disk Format (UDF) for the player to recognize
the tracks (or files). You can also play DATA CDs or DATA DVDs recorded in Multi
Session or Multi Border (see “Note on Multi Session/Border discs” on page 98).
Refer to the instructions supplied with the CD-R/CD-RW/DVD-R/DVD-RW drives
and the recording software (not supplied) for details on the recording format.
ROMs/DVD+RWs/DVD+Rs/DVD-RWs/DVD-Rs) recorded in JPEG format.
However, the discs must be recorded according to ISO9660 Level 1/Level 2 or Joliet
format and DATA DVDs of Universal Disk Format (UDF) for the player to recognize
the tracks (or files). You can also play DATA CDs or DATA DVDs recorded in Multi
Session or Multi Border (see “Note on Multi Session/Border discs” on page 98).
Refer to the instructions supplied with the CD-R/CD-RW/DVD-R/DVD-RW drives
and the recording software (not supplied) for details on the recording format.
Notes
• If both video data and JPEG image files exist on a DATA DVD, the player recognizes only
the video data.
• A total of up to 999 files can be recognized for discs that contain both MP3 and JPEG files.
Files are recognized in the order that they were recorded. For example, if 990 JPEG files are
recorded then 100 MP3 files are recorded, the 990 JPEG files recorded first and only the first
9 MP3 files can be recognized.
recorded then 100 MP3 files are recorded, the 990 JPEG files recorded first and only the first
9 MP3 files can be recognized.
Note on Multi Session/Border discs
If JPEG image files are recorded in the first session/border, the player will also play
JPEG image files in other session/border. If audio tracks and images in Music CD
format or Video CD format are recorded in the first session/border, only the first
session/border will be played back.
JPEG image files in other session/border. If audio tracks and images in Music CD
format or Video CD format are recorded in the first session/border, only the first
session/border will be played back.
Tip
• If you add numbers (01, 02, 03, etc.) to the front of the file names, the files will be played in
that order.
Notes
• This player can play JPEG image files with the extension “.JPEG” or “.JPG.”
• Some DATA CDs or DATA DVDs cannot be played on this system depending on file format.
• The player may not be able to play some DATA CDs/DATA DVDs created in the Packet
• Some DATA CDs or DATA DVDs cannot be played on this system depending on file format.
• The player may not be able to play some DATA CDs/DATA DVDs created in the Packet
Write format.
• If you add the extension “.JPG” or “.JPEG” to data not in JPEG format, “Can not Display”
will appear.
• Depending on the disc or the size of image files, playback may take some time to start.
• Progressive and lossless compression JPEG image files are not supported.
• The image size that can be displayed is limited. You can display the following images;
• Progressive and lossless compression JPEG image files are not supported.
• The image size that can be displayed is limited. You can display the following images;
width 32 - 7680 pixels by height 32 - 8192 pixels.
99
Playing VIDEO CDs with “PBC ON/OFF” Functions
DV
D Ad
D Ad
diti
onal
O
p
p
eratio
ns
Playing VIDEO CDs with “PBC ON/OFF”
Functions
Functions
The PBC (Playback control) function allows
you to search and perform other operations
interactively. PBC playback follows a selection
menu displayed on your TV screen.
you to search and perform other operations
interactively. PBC playback follows a selection
menu displayed on your TV screen.
1
Press MENU to select “PBC ON.”
The menu for your selection appears.
2
Press
V/v to select the item number you want.
You can also use the number buttons to select the item number and track.
V/v
ENTER
Number
buttons
buttons
O
RETURN
MENU
continued
100
Playing VIDEO CDs with “PBC ON/OFF” Functions
To return to the menu
Press
O RETURN.
To play using “PBC OFF”
Press MENU to select “PBC OFF.”
When “PBC OFF” is selected, the DVD player starts continuous play. You cannot play still
pictures such as a menu.
To return to “PBC ON,” press MENU to select “PBC ON.”
When “PBC OFF” is selected, the DVD player starts continuous play. You cannot play still
pictures such as a menu.
To return to “PBC ON,” press MENU to select “PBC ON.”
Note
• Depending on the VIDEO CD, “Press ENTER” in step 3 may appear as “Press SELECT” in
the instructions supplied with the disc. In this case, press
H PLAY.
3
Press ENTER.
4
Follow the instructions in the menu for interactive operations.
Refer to the instructions supplied with the disc, as the operating procedure
may differ depending on the VIDEO CD.
may differ depending on the VIDEO CD.
101
Quick Timer Recording
VCR Ad
ditio
nal Ope
ration
s
VCR Additional Operations
Quick Timer Recording
To extend the duration
Press
z REC repeatedly to set a new duration time.
To cancel the duration
Press
z REC repeatedly until the indicator disappears and the VCR returns to
normal recording mode.
To stop while recording
Press
x STOP.
Note
• You cannot display the current tape time in the display window when setting the recording
duration time.
After you have started recording, you can
have the VCR stop recording automatically
after a specified duration.
have the VCR stop recording automatically
after a specified duration.
1
While recording, press
z REC.
2
Press
z REC repeatedly to set the duration time.
Each press advances the time as follows.
The tape counter decreases minute by minute to 0:00, then the VCR stops
recording.
recording.
z
REC
x
STOP
0:30
1:00
1:30
4:00
Normal recording
1-25
102
Recording stereo and bilingual programs
Recording stereo and bilingual programs
Recording stereo programs
When you receive a program broadcast in stereo, press AUDIO to display “Hi-Fi” on
the TV screen. You can also select “Left,” “Right,” or “Mono.” If there is noise in the
stereo program, select “Mono.” The sound will be recorded in monaural (on both hi-
fi and normal audio tracks) but with less noise.
the TV screen. You can also select “Left,” “Right,” or “Mono.” If there is noise in the
stereo program, select “Mono.” The sound will be recorded in monaural (on both hi-
fi and normal audio tracks) but with less noise.
Recording bilingual programs
Press AUDIO to display “SAP” on the TV screen. When a SAP (Second Audio
Program) is received, “SAP” appears on the TV screen. When “MAIN” is selected,
the VCR records only the main sound.
Program) is received, “SAP” appears on the TV screen. When “MAIN” is selected,
the VCR records only the main sound.
Selecting the sound during playback
During playback, press AUDIO to select the sound you want.
How sound is recorded on a video tape
The VCR records sound onto two separate tracks. Hi-fi audio is recorded onto the
main track along with the picture. Monaural sound is recorded onto the normal audio
track along the edge of the tape.
main track along with the picture. Monaural sound is recorded onto the normal audio
track along the edge of the tape.
Notes
• To play a tape in stereo, you must use the A/V connections.
• When you play a tape recorded in monaural, the sound is heard in monaural regardless of the
• When you play a tape recorded in monaural, the sound is heard in monaural regardless of the
AUDIO setting.
To listen to
On-screen display
Display window
Stereo
Hi-Fi
STEREO indicator
Left channel
Left
STEREO indicator
Right channel
Right
STEREO indicator
Monaural sound on the
normal audio track
normal audio track
Mono
No indicator
Normal audio track
Hi-fi audio track
(main track)
(main track)
Monaural sound
Stereo sound
(left/right channels)
(left/right channels)
103
Searching using various functions
VCR Ad
ditio
nal Ope
ration
s
Searching using various functions
To search using the index function (Scan and Play)
The VCR automatically marks the tape with an index signal at the point where each
recording begins. Use these signals as references to find a specific recording.
recording begins. Use these signals as references to find a specific recording.
The VCR automatically marks the tape with
an index signal at the point where each
recording begins.
You can easily find a specific point using
various search functions.
an index signal at the point where each
recording begins.
You can easily find a specific point using
various search functions.
1
Insert an indexed tape into the VCR.
2
Press SEARCH.
3
Press
b to scan ahead, or B to scan backwards.
The VCR searches and then plays back for about five
seconds.
seconds.
4
Press
H PLAY to view that program.
If you do not press
H PLAY, the VCR automatically searches for the next index
mark, or until it reaches the end of the tape.
SEARCH
V/v/B/b
H
PLAY
Scan and play:
Go to
End search:
Press
Press
Press
or
Scan and play
continued
104
Searching using various functions
To search for the counter 0:00:00 point
To mark a point on the tape that you want to find later, reset the tape counter to
“0:00:00.”
The VCR automatically fast-forwards or rewinds to the 0:00:00 point on the tape
counter.
“0:00:00.”
The VCR automatically fast-forwards or rewinds to the 0:00:00 point on the tape
counter.
To search for a blank portion of the tape
The VCR automatically searches for the beginning of a blank portion. You can easily
find a point you can start recording from.
find a point you can start recording from.
Note
• Once in recording mode, if the VCR is put in pause and then released to start the recording,
no index mark will be inserted. An index mark will be inserted if the channel is changed
while VCR is put in pause.
while VCR is put in pause.
1
Press SEARCH.
2
Press
V.
The VCR starts searching and automatically stops at
the 0:00:00 point.
the 0:00:00 point.
1
Press SEARCH.
2
Press
v.
The VCR starts searching and automatically stops at
the beginning of a blank space. If no blank space is
found, the VCR reaches the end.
the beginning of a blank space. If no blank space is
found, the VCR reaches the end.
Go to
End search
105
Adjusting the picture (tracking)
VCR Ad
ditio
nal Ope
ration
s
Adjusting the picture
(tracking)
Although the VCR automatically adjusts the tracking
when playing a tape, distortion may occur if the
recording is in poor condition. In this case, manually
adjust the tracking.
when playing a tape, distortion may occur if the
recording is in poor condition. In this case, manually
adjust the tracking.
Press TRACKING +/– to display the tracking meter.
The distortion should disappear as you press one of
the two tracking buttons.
To resume automatic tracking adjustment, eject the
tape and reinsert it.
The distortion should disappear as you press one of
the two tracking buttons.
To resume automatic tracking adjustment, eject the
tape and reinsert it.
Note
• The auto tracking adjustment cannot be guaranteed to work with tapes recorded in the LP
mode on other VCRs.
Tracking
Tracking meter
1-26
106
Changing menu options
Changing menu options
You can change the tape length, auto play
and auto repeat settings. Normally the
default settings are used. Change these
settings if necessary.
and auto repeat settings. Normally the
default settings are used. Change these
settings if necessary.
1
Press SET UP when the DVD player is in stop
mode.
mode.
2
Press
V/v to select
(VIDEO) and press
ENTER.
3
Press
V/v to select the option to change.
SET UP
V/v/B/b
ENTER
H
PLAY
Language
Channel Setup
Auto Power Off
RF Output Channel
Auto Power Off
RF Output Channel
Clock Set/Adjust
:English
[ Off ]
[3CH]
[3CH]
RETURN
OPTION SETUP
SET UP
ENTER
v
V
Tape Length
Auto Play
Auto Play
RETURN
VIDEO FUNCTION SETUP
SET UP
v
V
b
B
[ T120 ]
[ On ]
[ On ]
Auto Repeat
[ Off ]
Tape Length
Auto Play
Auto Play
RETURN
VIDEO FUNCTION SETUP
SET UP
v
V
b
B
[ T120 ]
[ On ]
[ On ]
Auto Repeat
[ Off ]
107
Changing menu options
VCR Ad
ditio
nal Ope
ration
s
Menu choices
The default settings are indicated in bold print.
4
Press
B/b to change the setting.
5
Press SET UP to exit the menu.
Menu option
Set this option to
Tape Length
•
T-120
when using a T-120 or shorter length tape.
• T-160 when using a T-160 length tape.
• T-180 when using a T-180 or longer length tape.
• T-180 when using a T-180 or longer length tape.
Auto Play
•
On
to start playback automatically, when you insert a tape with
its safety tab removed.
• Off to turn off Auto play. You need to press
H PLAY to start
playback, even if you insert a tape with its safety tab removed.
Auto Repeat
• On to play back a tape repeatedly. The VCR rewinds a tape to
the beginning and restarts playback automatically.
•
Off
to turn off Auto repeat.
108
Editing with another VCR
Editing with another VCR
How to connect to record on this VCR
Notes
• Make sure you connect the plugs to jacks of the same color.
• If the other VCR is a monaural type and connected to this VCR’s LINE-2 IN jacks, connect
• If the other VCR is a monaural type and connected to this VCR’s LINE-2 IN jacks, connect
the audio plug to the AUDIO L (white) jack. The sound is recorded on both right and left
channels. If you connect to the AUDIO R (red) jack, the sound is recorded only on the right
channel.
channels. If you connect to the AUDIO R (red) jack, the sound is recorded only on the right
channel.
• If you connected this VCR to both the LINE IN and LINE OUT jacks of the other VCR,
select the input correctly to prevent a humming noise.
• You can use the LINE IN 1 jacks for editing. If the other VCR is a monaural type the sound
is recorded only on the channel whose jack is connected to the audio plug. To record on both
right and left channels, connect the audio plugs to the AUDIO L/R jacks using an audio/video
cord (not supplied).
right and left channels, connect the audio plugs to the AUDIO L/R jacks using an audio/video
cord (not supplied).
This VCR (Recorder)
Other VCR (Player)
LINE OUT
: Signal flow
LINE-2 IN
TV
Audio/video cord
(not supplied)
(not supplied)
109
Editing with another VCR
VCR Ad
ditio
nal Ope
ration
s
Operation (when recording on this VCR)
To stop editing
Press the
x (stop) buttons on both VCRs.
Tip
• To cut out unwanted scenes while editing, press
X on this VCR when an unwanted scene
begins. When it ends, press
X again to resume recording.
Before you start editing
• Turn on the VCR and the TV and set
it to the video channel.
• Press INPUT SELECT to display
“L1” or “L2” in the display window.
• Press SP/EP to select the tape speed,
SP or EP.
1
Insert a source tape with its safety tab removed into the other (playback) VCR.
Search for the point to start playback and set it to playback pause.
Search for the point to start playback and set it to playback pause.
2
Insert a tape into this (recording) VCR. Search for the point to start recording
and press
and press
X.
3
Press
z REC on this VCR to set it to recording pause.
4
To start editing, press the
X (pause) buttons on both VCRs at the same time.
z
REC
X
x
Click on the first or last page to see other SLV-D360P / SLV-D560P service manuals if exist.