Sony SLV-D300P (serv.man2) Service Manual ▷ View online
7-17
S-Video output error
Did the screen
select with the s-video
VIC1-28, 31 output
is normal?
Change a screen set
Check the circuit of ZIC1, VIC1
Yes
No
No
S-JACK output
is normal?
Check the connection between
VIC1 and S-JACK
Yes
No
Yes
Check the connection of s-video cable
(DVD Section)
Y/Pr/Pb output error
Did the screen
select with the component
VIC1-21, 23, 25pin
output is normal?
Change a sceen set
Check the circuit ZIC1 and VIC1
Yes
No
No
JACK1 output level
is normal?
Check the connection between
VIC1 and JACK1
Yes
No
Yes
Check the connection component cable
(DVD Section)
7-18E
CVBS output error
27MHz clock
input is normal at
pin 161 in ZIC1?
Analog output
is normal at pin 170
in ZIC1?
Check ZY1.
Check the soldering of ZIC1.
Yes
Yes
No
No
Analog signals are
inputted normally
VIC1-2?
Yes
No
Power is
normal at VIC1-1, 24, 34?
Yes
No
Pin 5 in VIC1
is in high stste?
Yes
Check the connection netween
pin 170 in ZIC1 and VIC1.
Check the connection betwen
VIC1-1 and PDS52.
Check the connection betwen
VIC1-1 and PDS52.
Check the soldering of VIC1.
No
No
Check the connection between
VIC1 and output jack.
Pin of VDDP
in ZIC1 has normal level?
Check the connection between
pin 1 in PCNS1 and pin 1 in ZIC1.
Yes
No
Peak to peak
voltage level of VIC1-33?
Video signal of
about 1V appears at
output jack?
Yes
No
Yes
Check the RCA cable.
8-1
8. REPAIR PARTS LIST
8-1 Exploded Views - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
8-1-1 Cabinet Assembly - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
8-1-2 VCR Mechanical Parts (Top Side) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
8-1-3 VCR Mechanical Parts (Bottom Side) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
8-1-4 DVD Mechanical Parts - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
8-2 Electrical Parts List - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
8-2
8-2
8-3
8-4
8-5
8-6
SLV-D300P
8-2
8-1-1 Cabinet Assembly
8-1 EXPLODED VIEWS
NOTE:
•
-XX, -X mean standardized parts, so they may
have some differences from the original one.
have some differences from the original one.
•
Items marked “*” are not stocked since they
are seldom required for routine service. Some
delay should be anticipated when ordering these
items.
are seldom required for routine service. Some
delay should be anticipated when ordering these
items.
•
The mechanical parts with no reference number
in the exploded views are not supplied.
in the exploded views are not supplied.
Ref. No.
Part No.
Description
Remarks
Ref. No.
Part No.
Description
Remarks
1
9-885-037-40 ASSY PANEL FRONT (COMBO UC)
2
9-885-037-27 DOOR TRAY
3
9-885-037-28 SPRING ETC-DOOR TRAY
4
9-885-037-38 ASSY DVD DECK
5
9-885-037-16 VHS DECK ASSY
6
3-078-598-01 BATTERY COVER (COMBO GRAY)
(for RMT-V501A)
21
9-885-037-26 DOOR CASSETTE
22
9-885-037-13 SPRING ETC MASK
101
9-885-037-25 CASE (COMBO UC), UPPER
153
3-075-256-01 SCREW TAP 3X12
155
3-078-566-01 SCREW TAP M3 L10 BLK
157
3-075-262-01 SCREW BH 4X12
0 200
1-824-674-11 POWER CORD EP2 SPT-2
UT01
9-885-035-23 COMMANDER, STANDARD (RMT-V501A)
5
4
101
157
not supplied
not supplied
not supplied
not supplied
not supplied
not supplied
not supplied
153
153
UT01
155
21
22
1
2
200
3
6
The components identified by mark
0
or
dotted line with mark
0
are critical for safety.
Replace only with part number specified.
Click on the first or last page to see other SLV-D300P (serv.man2) service manuals if exist.