Sony GV-D200 Service Manual ▷ View online
2-1
SECTION 2
DISASSEMBLY
GV-D200/D200E/D800/D800E
The following flow chart shows the disassembly procedure.
GV
-D200/D200E/D800/D800E
2-2. Bottom cabinet assembly, FP-571 flexible board
(Lithium battery)
(Lithium battery)
2-1. Cassette Lid assembly
2-3. LCD cabinet assembly (D800, D800E model)
2-5. LCD window cabinet assembly (SP-901,902)
(D800, D800E model)
(D800, D800E model)
2-10. Cabinet (R) block assembly, Jack frame
(IO-68, IR-38 boards)
(IO-68, IR-38 boards)
2-12. Upper cabinet assembly,
LCD block assembly (D800, D800E model)
LCD block assembly (D800, D800E model)
2-13. Hinge unit , FP-569 flexible board
(D800, D800E model)
(D800, D800E model)
2-6. Battery panel assembly, Battery terminal board,
DC-IN connector
DC-IN connector
2-8. Control switch block (FK-78), Loading lid
PD-130 board service position
(D800, D800E model)
(D800, D800E model)
2-4. PD-130, LS-56 boards (D800, D800E model)
2-9. Mechanism deck, Main frame assembly
2-11. EX-36 board, FP-570 flexible board
2-7. VC-250, FU-145 boards
[CONNECTION DIAGRAM FOR SERVICE POSITION (Mainly for voltage measurement and check)]
(VC-250, FU-145, IO-68 boards, Mechanism deck)
(VC-250, FU-145, IO-68 boards, Mechanism deck)
2-2
NOTE: Follow the disassembly procedure in the numerical order given.
2-1. CASSETTE LID ASSEMBLY
2-2. BOTTOM CABINET ASSEMBLY, FP-571 FLEXIBLE BOARD (LITHIUM BATTERY)
2
Two screws (M2
×
4),
lock ace, p2
5
Claw
6
Cassette lid
assembly
A
3
Press the cassette EJECT knob to
open the cassette compartment.
Push
1
Open the LCD panel in the
direction of the arrow
A
.
(GV-D800/D800E model)
4
Three dowels
VC-250
Board
6
Open the jack lid assembly
in the direction of the arrow
B
.
4
Two screws (M2
×
4),
lock ace, p2
7
Bottom cabinet assembly
5
Screw (M2
×
4),
lock ace, p2
3
Three screws (M2
×
4),
lock ace, p2
8
Tapping screw
(+k 2
×
5)
0
FP-571 flexible board
(4P)
9
Remove the lithium lid in the
direction of the arrow
C
.
B
2
Press the release button to remove
the cabinet lid assembly in the
direction of the arrow
direction of the arrow
A
.
1
Open the LCD panel little.
(GV-D800/D800E model)
C
A
2-3
2-3. LCD CABINET ASSEMBLY (D800, D800E MODEL)
2
Two screws (M2
×
4),
lock ace, p2
3
Two screws (M2
×
3),
lock ace, p2
1
Two screws (M2
×
4),
lock ace, p2
5
Two
claws
4
Two
claws
6
Remove the LCD cabinet assembly
in the direction of the arrow.
AC POWER
ADAPTOR
ADAPTOR
AC IN
PD-130
Board
PD-130 board
Touching here is safe when the machine
is normal. However touching here can be
dangerous if defective parts exist.
is normal. However touching here can be
dangerous if defective parts exist.
Caution
High voltage
High voltage
CN5502
LS-56 board
CN01 (2P)
CN01 (2P)
CN5607
Adjustment remote
commander (RM-95)
commander (RM-95)
Multi-CPC jig
(J-6082-311-A)
(J-6082-311-A)
[PD-130 BOARD SERVICE POSITION]
(D800, D800E MODEL)
(D800, D800E MODEL)
1
9
10
2
When the hinge unit is closed to be laid down,
remove CN01 (2P) on the LS-56 board.
If not, the main power cannot be turned on.
remove CN01 (2P) on the LS-56 board.
If not, the main power cannot be turned on.
LANC
jack
jack
2-4
2-4. PD-130, LS-56 BOARDS (D800, D800E MODEL)
0
Remove the PD-130 board
in the direction of the arrow.
9
Three screws (M2
×
3),
lock ace, p2
6
Two tapping screws
(B2
×
5)
qa
Screw (M2
×
3),
lock ace, p2
3
Harness (PL-53) (2P)
2
SP901 (2P)
4
ND901 (10P)
qs
LS-56 board, LS bracket
5
LCD901 (24P)
1
SP902 (2P)
8
Harness (EP-51) (2P)
7
FP-569 flexible
board (26, 32P)
PD-130
Board
Click on the first or last page to see other GV-D200 service manuals if exist.