DOWNLOAD Sony GV-D1000 Service Manual ↓ Size: 17.4 MB | Pages: 127 in PDF or view online for FREE

US Model

Canadian Model

GV-D1000

AEP Model

UK Model

E Model

GV-D1000E

J200 MECHANISM

• For INSTRUCTION MANUAL, refer to separate file (992992972.pdf).
• For MECHANISM ADJUSTMENTS, refer to the “DV MECHANICAL ADJUSTMENT MANUAL 

 J MECHANISM  ” (9-929-807-11).

Photo : GV-D1000E

— 2 —

Power requirements
100 - 240 V AC, 50/60 Hz
Output voltage
DC OUT: 8.4 V, 1.5 A in the
operating mode
Operating temperature
0 

°C to 40 °C (32 °F to 104 °F)

Storage temperature
–20 

°C to +60 °C (–4 °F to +140 °F)

Dimensions (approx.)
125 

× 39 × 62 mm

(5 

× 1 9/16 × 2 1/2 in.) (w/h/d)

excluding projecting parts
Mass (approx.)
280 g (9.8 oz)
excluding power cord

Design and specifications are
subject to change without notice.

Audio output
Phono jacks (2) 327 mV, output
impedance less than 1 k

Ω

(kilohms)
DV jack
4-pin connector: S100
Headphone jack
Stereo minijack (ø 3.5 mm)
LANC jack
Stereo minijack (ø 2.5 mm)
USB jack
Mini-B

Picture
10 cm (4.0 type)
80.6 

× 60.5 mm (3 1/4 × 2 1/2 in.)

Total dot number
123 200 (560 

× 220)

Power requirements
8.4 V (AC power adaptor)
7.2 V (battery pack)
Average power consumption
During playback using LCD
5.2 W
During playback when you close
the LCD panel
3.5 W
Operating temperature
0 

°C to 40 °C (32 °F to 104 °F)

Storage temperature
–20 

°C to +60 °C (–4 °F to +140 °F)

Dimensions (Approx.)
148 

× 65 × 133 mm

(5 7/8 

× 2 5/8 × 5 1/8 in.)

(w/h/d)
Mass (approx.)
880 g (1 lb 15 oz)
excluding the battery pack and
cassette
Supplied accessories
See page 3.

Video recording system
2 rotary heads
Helical scanning system
Audio recording system
Rotary heads, PCM system
Quantization: 12 bits (Fs 32 kHz,
stereo 1, stereo 2),
16 bits (Fs 48 kHz, stereo)
Video signal
PAL colour, CCIR standards
Usable cassette
Mini DV cassette with the 
mark printed
Tape speed
SP: Approx. 18.81 mm/s
LP: Approx. 12.56 mm/s
Recording/playback time (using
cassette DVM60)
SP: 1 hour
LP: 1.5 hours
Fastforward/rewind time (using
cassette DVM60)
Approx. 2 min.

S video input
4-pin mini DIN
Luminance signal: 1 Vp-p, 75 

Ω

(ohms), unbalanced

Chrominance signal: 0.3 Vp-p,
75 

Ω (ohms), unbalanced

S video output
4-pin mini DIN
Luminance signal: 1 Vp-p, 75 

Ω

(ohms), unbalanced

Chrominance signal: 0.3 Vp-p,
75 

Ω (ohms), unbalanced

Audio/Video input
AV MINIJACK
Video: 1 Vp-p, 75

Ω (ohms),

unbalanced, sync negative
Audio: 327 mV, input impedance
more than 47 k

Ω (kilohms)

Video output
Phono jack, 1 Vp-p, 75

Ω (ohms),

unbalanced, sync negative

GV-D1000 :
Chrominance signal: 0.286 Vp-p
75 

Ω (ohms), unbalanced

GV-D1000E :

GV-D1000 :
Chrominance signal: 0.286 Vp-p
75 

Ω (ohms), unbalanced

GV-D1000E :

0

0

0

— 3 —

1.

Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.

2.

Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.

3.

Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.

4.

Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.

5.

Check the B+ voltage to see it is at the values specified.

6.

Flexible Circuit Board Repairing

• Keep the temperature of the soldering iron around 270˚C

during repairing.

• Do not touch the soldering iron on the same conductor of the

circuit board (within 3 times).

• Be careful not to apply force on the conductor when soldering

or unsoldering.

Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)

Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40°C higher than

ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!

• Strong viscosity

Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.

• Usable with ordinary solder

It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.

After correcting the original service problem, perform the following

safety checks before releasing the set to the customer.

1

2

4

5

7

6

8

1

AC-L10A/L10B/L10C AC power adaptor (1),

(1)

2

A/V converting cable (1) 

3

A/V connecting cable (1) 

4

USB cable (1) 

5

Wireless Remote Commander (1)

6

7

Size R6 (AA) battery for Remote
Commander (2)

CD-ROM (SPVD-008 (I) USB Driver) (1) (GV-D1000)

CD-ROM (SPVD-008 USB Driver) (1) (GV-D1000E)

8

9

 (1) (GV-D1000E : AEP, UK only)

(GV-D1000E : E only)

9

3

Make sure that the following accessories are supplied with your camcorder.

— 4 —

1-1.

SERVICE NOTE ····························································· 1-1

1.

POWER SUPPLY DURING REPAIRS ·························· 1-1

2.

TO TAKE OUT A CASSETTE WHEN NOT EJECT
(FORCE EJECT) ····························································· 1-1

1-2.

SELF-DIAGNOSIS FUNCTION ···································· 1-2

1.

SELF-DIAGNOSIS FUNCTION ···································· 1-2

2.

SELF-DIAGNOSIS DISPLAY ······································· 1-2

3.

SERVICE MODE DISPLAY ·········································· 1-2

3-1.

Display Method ······························································· 1-2

3-2.

Switching of Backup No. ················································ 1-2

3-3.

End of Display ································································· 1-2

4.

SELF-DIAGNOSIS CODE TABLE ································ 1-3

2-1.

LCD CABINET ASSEMBLY ········································· 2-2

2-2.

PD-130 BOARD, LS-56 BOARD ··································· 2-3

2-3.

LCD WINDOW CABINET ASSEMBLY
(LCD901, ND901, SP901, SP902) ·································· 2-4

2-4.

BOTTOM CABINET ASSEMBLY, FP-571 FLEXIBLE
BOARD (V/L RECHARGEABLE BATTERY) ············· 2-5

2-5.

VC-275 BOARD ····························································· 2-5

2-6.

BATTERY TERMINAL BOARD ··································· 2-6

2-7.

FP-575 FLEXIBLE BOARD (LANC), PR-41 BOARD,
IO-69 BOARD ································································· 2-6

2-8.

MS-95 BOARD ······························································· 2-7

2-9.

MECHANISM DECK ····················································· 2-7

2-10. EJ-35 BOARD ································································· 2-8
2-11. EX-39 BOARD ······························································· 2-9
2-12. MEMORY STICK CONNECTOR (10P),

FK-81 BOARD ······························································ 2-10

2-13. FP-602 FLEXIBLE BOARD (DV IN/OUT),

LCD BLOCK ASSEMBLY ··········································· 2-11

2-14. HINGE UNIT, FP-569 FLEXIBLE BOARD ················ 2-12
2-15. CIRCUIT BOARDS LOCATION ································· 2-14
2-16. FLEXIBLE BOARDS LOCATION ······························ 2-15

3-1.

OVERALL BLOCK DIAGRAM (1/5) ··························· 3-1

3-2.

OVERALL BLOCK DIAGRAM (2/5) ··························· 3-3

3-3.

OVERALL BLOCK DIAGRAM (3/5) ··························· 3-5

3-4.

OVERALL BLOCK DIAGRAM (4/5) ··························· 3-7

3-5.

OVERALL BLOCK DIAGRAM (5/5) ··························· 3-9

3-6.

POWER BLOCK DIAGRAM (1/3) ······························ 3-11

3-7.

POWER BLOCK DIAGRAM (2/3) ······························ 3-13

3-8.

POWER BLOCK DIAGRAM (3/3) ······························ 3-15

4-1.

FRAME SCHEMATIC DIAGRAM (1/2) ······················· 4-1
FRAME SCHEMATIC DIAGRAM (2/2) ······················· 4-3

4-2.

SCHEMATIC DIAGRAMS ············································ 4-7

• PD-130 (LCD DRIVER)(1/2)

SCHEMATIC DIAGRAM ······························ 4-7

• PD-130 (BACK LIGHT)(2/2)

SCHEMATIC DIAGRAM ······························ 4-9

• FK-81 (SWITCH BLOCK)

SCHEMATIC DIAGRAM ···························· 4-11

• EX-39 (MULTI CONNECTOR)

SCHEMATIC DIAGRAM ···························· 4-13

• IO-69 (AV IN/OUT)

SCHEMATIC DIAGRAM ···························· 4-15

• VC-275 (REC/PB AMP)(1/13)

SCHEMATIC DIAGRAM ···························· 4-17

• VC-275 (DV SIGNAL PROCESS)(2/13)

SCHEMATIC DIAGRAM ···························· 4-19

• VC-275 (DV INTERFACE)(3/13)

SCHEMATIC DIAGRAM ···························· 4-21

• VC-275 (VIDEO IN/OUT)(4/13)

SCHEMATIC DIAGRAM ···························· 4-23

• VC-275 (USB SIGNAL PROCESS)(5/13)

SCHEMATIC DIAGRAM ···························· 4-25

• VC-275 (MECHANISM CONTROL)(6/13)

SCHEMATIC DIAGRAM ···························· 4-27

• VC-275 (DRUM/CAPSTAN MOTOR DRIVE)(7/13)

SCHEMATIC DIAGRAM ···························· 4-29

• VC-275 ((HI CONTROL)(8/13)

SCHEMATIC DIAGRAM ···························· 4-31

• VC-275 (AUDIO)(9/13)

SCHEMATIC DIAGRAM ···························· 4-33

• VC-275 (VIDEO, AUDIO, USB JACK)(10/13)

SCHEMATIC DIAGRAM ···························· 4-35

• VC-275 (DC IN, CHARGE)(11/13)

SCHEMATIC DIAGRAM ···························· 4-37

• VC-275 (DC/DC CONVERTER)(12/13)

SCHEMATIC DIAGRAM ···························· 4-39

• VC-275 (CONNECTOR)(13/13)

SCHEMATIC DIAGRAM ···························· 4-41

• MS-95 (A/D CONVERTER, SHUTTER

CONTROL)(1/5)

SCHEMATIC DIAGRAM ···························· 4-43

• MS-95 (CAMERA CONTROL)(2/5)

SCHEMATIC DIAGRAM ···························· 4-45

• MS-95 (Y/C PROCESS)(3/5)

SCHEMATIC DIAGRAM ···························· 4-47

• MS-95 (DIGITAL STILL CONTROL)(4/5)

SCHEMATIC DIAGRAM ···························· 4-49

• MS-95 (DRAM, FLASH MEMORY)(5/5)

SCHEMATIC DIAGRAM ···························· 4-51

4-3.

PRINTED WIRING BOARDS ····································· 4-53

• FK-81 (SWITCH BLOCK)

PRINTED WIRING BOARD ······················· 4-53

• PD-130 (LCD DRIVER, BACK LIGHT)

PRINTED WIRING BOARD ······················· 4-55

• LS-56 (LCD SWITCH),

PRINTED WIRING BOARD ······················· 4-58

• EX-39 (MULTI CONNECTOR)

PRINTED WIRING BOARD ······················· 4-59

• IO-69 (AV IN/OUT)

PRINTED WIRING BOARD ······················· 4-61

• PR-41 (REMOTE COMMANDER RECEIVER),

FP-575 (LANC)

PRINTED WIRING BOARDS ····················· 4-63

• FP-100 (MODE SWITCH), FP-228 (DEW SENSOR),

FP-102 (TAPE TOP/END SENSOR, S/T REEL),
FP-571 (BATTERY)

FLEXIBLE BOARDS ··································· 4-65

• EJ-35 (EJECT SWITCH)

PRINTED WIRING BOARD ······················· 4-65

• VC-275 (REC/PB AMP, DV SIGNAL PROCESS,

DV INTERFACE, VIDEO IN/OUT, USB SIGNAL
PROCESS, MECHANISM CONTROL, DRUM/
CAPSTAN MOTOR DRIVE, HI CONTROL, AUDIO,
VIDEO, USB JACK, DC IN, CHARGE, DC/DC
CONVERTER, CONNECTOR)

PRINTED WIRING BOARD ······················· 4-67

• MS-95 (A/D CONVERTER, SHUTTER CONTROL,

CAMERA CONTROL, Y/C PROCESS, DIGITAL
STILL CONTROL, SDRAM, FLASH MEMORY)

PRINTED WIRING BOARD ······················· 4-71

4-4.

WAVEFORMS ······························································ 4-73

4-5.

MOUNTED PARTS LOCATION ································· 4-77