DOWNLOAD Sony XBR-55X900A Service Manual ↓ Size: 8.22 MB | Pages: 40 in PDF or view online for FREE

XBR-55X900A 33

255

254

252

251

256

257

258

259

253

 

251 

1-846-696-11 

LEAD WIRE WITH CONNECTOR 51P

 

 

 

FOR SERIAL No. 1800001 - 6010000 ONLY.

 

252 

1-910-107-83 

CONNECTOR ASSEMBLY 3P (BAF-TS)

 

253 

1-910-107-78 

(LVDS) FLEXIBLE FLAT CABLE 20P

 

254 

1-846-694-11 

(LVDS) FLEXIBLE FLAT CABLE 41P

 

255 

1-846-692-12 

(LVDS) FLEXIBLE FLAT CABLE 51P

260

 

256 

1-910-107-76 

HARNESS ASSEMBLY (BAF)

 

257 

1-910-107-75 

CONNECTOR ASSEMBLY 28P

 

258 

1-846-714-11 

CONNECTOR ASSEMBLY 3P (G6-G7)

 

259 

1-910-107-77 

HARNESS ASSEMBLY (G6/G7-LD)

 

260 

1-910-107-74 

CONNECTOR ASSEMBLY 5P

XBR-55X900A 34

 

SCREW, + PSW 3X10

SCREW, (+PSW) (M3X6)

SCREW, +BVTP 3X10 TYPE IT-3

SCREW ORNAMENTAL M6X12

SCREW, +PSW M3X6 W12

7-682-949-09

2-990-421-41

7-685-647-79

4-268-126-02

SCREW, +PSW M3X6 STEP

4-457-815-02

4-256-393-01

Rear Cover (18) 

Rear Cover (4) 

Rear Cover (2), Loud Speakers 18MM (4), Smart Core Block (1)

Bracket Module (2), CX Board (2), Switch Unit (2), Main Board (13),
Bracket HUS (2), TS Board (1), TW Brackets (4), Mounted PWBs (4), 
Power Supply Board G7 (5), Power Supply Board G6 (5), TCON Shield to Panel (6)

Speaker Cover Right (12), Speaker Cover Left (12)  

4-159-298-01

SCREW, + PSW M4X10

Neck Bracket Right (3), Neck Bracket Left (3)

4-457-814-01

SPACER (SP-RC), HEX

Speaker Cover Right (2), Speaker Cover Left (2)

Speaker Box Assembly Right (5), Speaker Box Assembly Left (5),
AC Cover (1), Woofer Cover Right (1), Woofer Cover Left (1) 

 

2-580-607-01

SCREW, +PSW M5X12

Table Top Stand to TV (4), Neck Stand Left (2), Neck Stand Right (2)

XBR-55X900A 35

 

 

2-580-607-01 

SCREW, +PSW M5X12

 

 

 

(SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV)  

  

 

For product protection and safety reasons, Sony strongly recommends 

 

 

 

that you use the screws provided with the TV.  

 

 

 

CAUTION: These screws cannot be used to secure the TV  

 

 

 

to the Wall Mount Brackets.

 

 

4-462-778-11 

MANUAL, INSTRUCTION (ENGLISH VERSION)

 

 

4-462-778-21 

MANUAL, INSTRUCTION (FRENCH VERSION)

 

 

4-464-369-11 

SUPPLEMENT (STAND INSTALLATION)

 

 

4-273-074-14 

FLYER, SAFETY

 

 

4-463-174-01 

BADGE, XBR LOGO (H6)

 

 

4-462-315-01 

SCREW CAP

 

 

4-262-708-04 

CLAMPER, CABLE

 

 

4-441-738-01 

CLAMPER CABLE (L)

 

 

4-096-737-01 

CUSHION (G)

 

 

4-454-669-01 

PANEL ORNAMENT, SC

 

 

7-600-031-96 

TAPE (3M 1350FW-1) 15MMX66M WHT 

 

 

7-600-031-97 

TAPE (3M 1350FB-1) 15MMX66M BLK

  

4-465-860-01  TAPE_95

 

 

4-455-609-01  

AL SHEET

  

 

ORDER THIS PART WHEN REPLACING THE TCON BOARD.

 

 

4-414-470-01 

SUPPORT BELT KIT

 

 

X-2586-996-1 

PASSIVE 3D GLASSES

 

 

1-491-987-11 

REMOTE COMMANDER (RM-YD087)

 

 

1-492-077-12 

ONE TOUCH REMOTE CONTROL (RMF-YD001)

XBR-55X900A A-1

is a trademark of Sony Electronics.

Reproduction in whole or part without written permission is prohibited. All rights reserved.

Encryption key components developed by Sony Corporation contain confidential information and shall be handled under the non-disclosure obligations provided 
in the applicable agreement with Sony Corporation (and/or its subsidiary). 
As part of this agreement specific instructions must be adhered to whenever a Circuit Board containing encryption key components is repaired and/or replaced 
pursuant to the following:

1. 

In the service manual the Circuit Board(s) containing encryption key components shall be identified with a red outline and a  .

2.  Only repair boards or components listed in the service manual shall be utilized for replacement and/or repair.

3.  Disassembly, decryption or reverse-engineering component(s) is strictly prohibited.

4.  Any board in which the Servicer replaces an encryption key component must be placed back into the set it orignally came from and the replaced 

defective component MUST BE DESTROYED. Boards cannot be swapped.

5. 

If a Circuit Board identified with a red outline and a    in the service manual is deemed to be defective:
a. 

and if a core charge is imposed and is covered under the product warranty, the defective un-repaired or modified board MUST BE RETURNED to 
Sony.

b. 

and if the core charge is NOT covered under the product warranty, the defective un-repaired or modified board MUST BE DESTROYED.

6. 

If a unit is destroyed (such as field scrap), the Circuit Board identified with a red outline and a    in the service manual MUST BE DESTROYED.