Sony XBR-52HX905 Service Manual ▷ View online
XBR-52HX905
16
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
151
4-187-239-02
FRAME, HB (52VIO)
152
4-187-236-02
FRAME, VR (52VIO)
153
4-187-238-02
FRAME, HT (52VIO)
154
4-187-237-02
FRAME, VL (52VIO)
2-580-590-01
SCREW, +PSW M3X5
2-580-592-01
SCREW, +PSW M3X8
4-159-298-01
SCREW, +PSW M4X10
1-4. HORIZONTAL FRAMES, VERTICAL FRAMES, PLATE CORNERS AND
BOTTOM FRAME REMOVAL
A Remove 6 screws from Bottom Frame to detach from LCD Panel
B Remove 6 screws from bottom Horizontal Frame to detach from LCD Panel
B Remove 6 screws from bottom Horizontal Frame to detach from LCD Panel
C Remove 8 screws from Corner Plates to detach from Horizontal and Vertical Frames
D Remove 2 screws from top Horizontal Frame to detach from LCD Panel
D Remove 2 screws from top Horizontal Frame to detach from LCD Panel
E Remove 2 screws from Vertical Frames to detach from LCD Panel
B
A
E
C
D
152
151
Corner
Plate
154
153
XBR-52HX905
17
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
201
NA
P-MOD (LCD PANEL)
FOR ALL P-MOD (LCD PANEL) PART NUMBER INFORMATION
REFER TO THE LCD PANELS SERVICE MANUAL
202
1-474-239-11
G6A (POWER) BOARD, COMPLETE
203
A-1782-029-B
BAL BOARD, COMPLETE
NOTE: For BAL Board replacement, please refer to section
2-2. Setting the Destination after Replacing the BAL Board or LCD Panel.
NOTE: Final software is not installed on this BAL Board. Install the
update after replacing this board using the instructions provided with the
software.
204
4-175-711-01
BRACKET, SIDE JACK
205
4-164-920-01
LABEL, SIDE JACK
206
A-1782-723-A
HTD BOARD, MOUNTED
2-580-592-01
SCREW, +PSW M3X8
1-5. G6A (POWER) BOARD, BAL BOARD, HTD BOARD AND LCD PANEL REMOVAL
CAUTION: Refer to
“Special Handling Instructions When Replacing the LCD Panel Assembly” on page 5
A Remove 4 screws from G6A (Power) Board
B Disconnect 4 connectors from G6A (Power) Board
B Disconnect 4 connectors from G6A (Power) Board
C Carefully peel-off Insulation Sheet to detach from LCD Panel
D Remove 4 screws from BAL Board
D Remove 4 screws from BAL Board
E Disconnect 5 connectors from BAL Board
F Slide Side Jack Bracket to right-side to remove from BAL Board
G Disconnect 1 connector from HTD Board and remove 2 screws
NOTE:The Insulation Sheet is not included with the LCD Panel and must be reattached to the
replacement LCD Panel
203
204
205
202
201
Insulation
Sheet
206
Insulation Sheet
Double Sided Tape
E
F
A
B
C
D
G
XBR-52HX905
18
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
* 251
1-910-101-43
HARNESS ASSEMBLY
252
1-910-100-97
CONNECTOR ASSEMBLY 8P
253
1-910-100-94
CONNECTOR ASSEMBLY 11P
254
1-837-781-11
(LVDS) FLEXIBLE FLAT CABLE
255
1-910-100-96
CONNECTOR ASSEMBLY 14P
256
1-910-100-95
CONNECTOR ASSEMBLY 6P
* 257
1-837-532-12
CONNECTOR ASSEMBLY
1-6. CLEANING THE LCD PANEL
CAUTION: When cleaning the TV, be sure to unplug the power cord to avoid any chance of electric shock.
Clean the cabinet of the TV with a dry soft cloth.
Wipe the LCD screen gently with a soft cloth.
®
Wipe the LCD screen gently with a soft cloth.
®
Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm
water.
®
If using a chemically pretreated cloth, please follow the instruction provided on the package.
®
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
®
Periodic vacuuming of the ventilation openings is recommended to ensure the proper ventilation.
1-7. SCREW LEGEND
P/N
DESCRIPTION
REMARKS
TOTAL
■
4-193-088-01
SCREW, +PWH M4X10
RC(10)
10
□
2-580-590-01
SCREW, +PSW M3X5
CORNER PLATES to HRZ/VRT FRMS(8)
8
▼
7-685-648-79
SCREW, +BVTP 3X12 TYPE2 IT-3 RC to SIDE JACK(1), RC to TRMNL AREA(1)
2
▽
2-580-608-01
SCREW, +PSW M5X16
TABLE-TOP STAND(4), NECK to BASE(4)
8
●
2-580-592-01
SCREW, +PSW M3X8
G6A(4), BAL(4), HTD(2), SP BRKT-L(2), SP BRKT-R(2), BTM HRZ FRM(6)
20
○
4-159-298-01
SCREW, +PSW M4X10
RC(5), VESA BRKT(2), BTM FRM(6), TOP HRZ FRM(2), VRT FRM-L(1), VRT FRM-R(1)
17
XBR-52HX905
1-8. CONNECTOR
CN6153
CN6152
CN6752
CN6003
G6A
CN2600
CN2602
CN4300
CN2561
CN3800
BAL
TCON
SP
SP
HLR
ILLUMINATION
MODULE
SWITCH UNIT
POWER SWITCH
HTD
253
254
255
256
251
252
257
XBR-52HX905
19
DISASSEMBLY/PART NUMBER INFORMATION
1-9. ACCESSORIES AND PACKAGING
4-180-194-11
MANUAL, INSTRUCTION
*
4-180-046-11
SUPPLEMENT(STAND INSTALLATION)
1-10. OPTIONAL ACCESSORIES
1-458-251-11
3D GLASSES
1-458-253-11
3D SYNC TRANSMITTER UNIT
1-11. MISCELLANEOUS
4-197-394-01
AL TAPE
4-180-957-01
BADGE, XBR LOGO(H6)
A-1768-621-A
BAG ASSEMBLY,SCREW C
3-701-617-62
BAG, POLYETHYLENE, STANDARD
!
1-837-645-12
POWER-SUPPLY CORD SET
4-100-136-01
SHEET (CORE), C
4-197-399-11
SPACER
X-2348-140-3
SUPPORT BELT KIT
4-198-769-01
TAPE (FPC)
1-12. REMOTE COMMANDER
1-487-755-22
REMOTE COMMANDER (RM-YD044)
Click on the first or last page to see other XBR-52HX905 service manuals if exist.