Sony XBR-46HX929 / XBR-55HX920 / XBR-55HX929 Service Manual ▷ View online
XBR-46HX929/55HX920/55HX929
51
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identifies per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
(Check the Sony Authorized Servicer Portal at
http://www.sony.com/asp
website for any additional service related issues.)
101
1-858-588-11
SPEAKER BOX ASSEMBLY
(XBR-46HX929 ONLY)
101
1-858-595-11
SPEAKER BOX ASSEMBLY (9X5CM)
(XBR-55HX920/55HX929 ONLY)
102
1-858-593-12
LOUDSPEAKER (3X15CM)
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
103
4-263-655-01
BRACKET, SP
4-256-393-01
SCREW, +PSW M3X6 W12
103
102
103
102
101
B
A
D
C
E
LOUDSPEAKER AND SPEAKER BOX ASSEMBLY REMOVAL
A Slide-out left side Loudspeaker to detach from Speaker Bracket
B Release clips and lift-up left side Speaker Bracket to detach from Horizontal Bottom Frame
C Slide-out right side Loudspeaker to detach from Speaker Bracket
D Release clips and lift-up right side Speaker Bracket to detach from Horizontal Bottom Frame
E Remove 3 screws to detach Speaker Box Assembly from LCD Panel
XBR-46HX929/55HX920/55HX929
52
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identifies per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
(Check the Sony Authorized Servicer Portal at
http://www.sony.com/asp
website for any additional service related issues.)
155
4-256-663-01
CAP, SEALING (CAMERA)
156
A-1792-512-A
HEM2 BOARD, MOUNTED
157
4-256-664-01
BRACKET, BOTTOM
2-990-421-41
SCREW (+PSW) (M3X6)
151
1-458-355-11
WIRELESS LAN CARD
152 1-754-746-11 ANTENNA
153 1-754-750-11 ANTENNA
153 1-754-750-11 ANTENNA
154
1-489-507-11
CAMERA MODULE
151
153
152
154
155
156
157
A
C
B
D
E
F
G
WIRELESS LAN CARD, HEM2 BOARD AND
CAMERA MODULE REMOVAL
A Remove 1 screw to detach Wireless LAN Card from LCD Panel
B Remove 1 screw to detach Antenna from LCD Panel
C Remove 1 screw to detach Antenna from LCD Panel
D Remove 1 screw and disconnect 1 connector to detach Camera Module from Bottom Bracket
E Lift-up Camera Sealing Cap to detach from Bottom Bracket
F Release clips and disconnect 1 connector to detach HEM2 Board from Bottom Bracket
G Release clips and lift-up Bottom Bracket to detach from Horizontal Bottom Frame
XBR-46HX929/55HX920/55HX929
53
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identifies per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
(Check the Sony Authorized Servicer Portal at
http://www.sony.com/asp
website for any additional service related issues.)
206
1-474-308-11
G5 BOARD, COMPLETE
(XBR-46HX929 ONLY)
206
1-474-328-11
G6 BOARD, COMPLETE
(XBR-55HX920/55HX929 ONLY)
207
4-268-443-01
SHEET, INSULATION (G4)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
208
4-268-445-01
SHEET, INSULATION (G7)
(XBR-55HX920/55HX929 ONLY)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
209
1-474-327-11
G7 BOARD, COMPLETE
(XBR-55HX920/55HX929 ONLY)
2-990-421-41
SCREW (+PSW) (M3X6)
201
4-256-431-11
SHEET (BAT-L METAL SIDE)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
202
4-256-432-11
SHEET (BAT-L METAL BOTTOM)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
203
4-265-817-02
BRACKET SIDE (BAT-L METAL)
204
4-265-819-02
BRACKET BOTTOM (BAT-L METAL)
205
A-1826-384-A
BATL BOARD, COMPLETE
(XBR-46HX929/55HX929 ONLY)
AFTER REPLACING THE MAIN BOARD OR THE LCD PANEL,
YOU MUST UPDATE THE SOFTWARE TO THE LATEST VERSION.
205
A-1831-642-A
BATL BOARD, COMPLETE
(XBR-55HX920 ONLY)
AFTER REPLACING THE MAIN BOARD OR THE LCD PANEL,
YOU MUST UPDATE THE SOFTWARE TO THE LATEST VERSION.
206
209
205
204
203
202
201
207
208
E
F
G
C
D
B
A
G5/G6/G7 (POWER SUPPLY) BOARD AND
BATL (MAIN) BOARD REMOVAL
NOTES:
Refer to
“Handling the LVDS FFC Connector” on page 3
to disconnect the LVDS Connector.
The Sheet (BAT-L Metal Bottom), Sheet (BAT-L Metal Side), Insulation Sheet (G4)
and Insulation Sheet (G7) are not included with the LCD Panel and must be replaced
when replacing the LCD Panel.
A Release 2 clips to detach Side Bracket from BATL Board
B Release 2 clips to detach Bottom Bracket from BATL Board
C Remove 6 screws from BATL Board
D Disconnect connectors from BATL Board
4 from (XBR-55HX920 Only)
5 from (XBR-46HX929/55HX929 Only)
(Refer to
“Handling the LVDS FFC Connector” on page 3
)
E Remove screws from G5/G6 Board
3 from G5 Board (XBR-46HX929 Only)
4 from G6 Board (XBR-55HX920/55HX929 Only)
F Disconnect connectors from G5/G6 Board
5 from G5 Board
(XBR-46HX929 Only)
7 from G6 Board
(XBR-55HX920/55HX929 Only)
G Remove 4 screws and disconnect 4 connectors
from G7 Board
(XBR-55HX920/55HX929 Only)
XBR-46HX929/55HX920/55HX929
54
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identifies per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
(Check the Sony Authorized Servicer Portal at
http://www.sony.com/asp
website for any additional service related issues.)
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
251
4-256-650-01
FRAME, HT(46 ALY)
(XBR-46HX929 ONLY)
251
4-256-654-01
FRAME, HT(55 ALY)
(XBR-55HX920/55HX929 ONLY)
252
4-256-653-01
FRAME, VR(46 ALY)
(XBR-46HX929 ONLY)
252
4-256-657-01
FRAME, VR(55 ALY)
(XBR-55HX920/55HX929 ONLY)
253
4-256-652-01
FRAME, VL(46 ALY)
(XBR-46HX929 ONLY)
253
4-256-656-01
FRAME, VL(55 ALY)
(XBR-55HX920/55HX929 ONLY)
254
4-256-651-01
FRAME, HB(46 ALY)
(XBR-46HX929 ONLY)
254
4-256-655-01
FRAME, HB(55 ALY)
(XBR-55HX920/55HX929 ONLY)
255
4-263-654-01
JOINT, CORNER
256
A-1792-920-A
HLT2 BOARD, MOUNTED
257
NA
LCD PANEL ASSEMBLY (P-MOD)
NOTE: THE LD BOARD IS NOT INCLUDED WITH THIS LCD PANEL
FOR ALL LCD PANEL AND TCON BOARD PART NUMBER INFORMATION
REFER TO THE LCD PANELS SERVICE MANUAL
258
4-284-260-01
SHEET, ALUMINUM
(XBR-46HX929 ONLY)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
2-990-421-41
SCREW (+PSW) (M3X6)
251
252
253
257
256
255
254
258
Detail A-2
G
Detail A-1
F
A
B
D
C
E
Detail A-1
Detail A-2
CLEANING THE LCD PANEL
CAUTION: When cleaning the TV, be sure to unplug the power cord to avoid any chance of electric shock.
Clean the cabinet of the TV with a dry soft cloth.
Wipe the LCD screen gently with a soft cloth.
Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.
If using a chemically pretreated cloth, please follow the instruction provided on the package.
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.
HORIZONTAL AND VERTICAL FRAMES, HLT2 BOARD AND
LCD PANEL REMOVAL
CAUTIONS:
When replacing the LCD Panel Assembly refer to
“Special Handling Instructions When Replacing the
LCD Panel Assembly” on page 5
.
The HLT2 Board is attached to the LCD Panel with PWB (H) Tape. Do NOT damage the HLT2 Board
when removing from the LCD Panel.
A Remove screws from Horizontal Top Frame
4 from XBR-46HX929 Only
5 from XBR-55HX920/55HX929 Only
B Remove screws from Vertical Right Frame
3 from XBR-46HX929 Only
4 from XBR-55HX920/55HX929 Only
C Remove screws from Vertical Left Frame
3 from XBR-46HX929 Only
4 from XBR-55HX920/55HX929 Only
D Remove 7 screws from Horizontal Bottom Frame
E Lift up Frames to detach from LCD Panel
F Remove 8 screws from Corner Joints to
detach Frames
G Carefully lift-up HLT2 Board to detach
from LCD Panel
Click on the first or last page to see other XBR-46HX929 / XBR-55HX920 / XBR-55HX929 service manuals if exist.