Sony KV-XS29M31 Service Manual ▷ View online
–
37
–
KV
-XS29M31/33/50/60/63/65/93
-XS29M31/33/50/60/63/65/93
RM-954
KV
-XS29M39/69/87/89
-XS29M39/69/87/89
RM-953
20
Advanced Operations
Additional Teletext tasks
To
display a Teletext page on the TV
picture
picture
check the contents of a Teletext service
select a Teletext page
hold (pause) a Teletext page
(stop the page from scrolling)
(stop the page from scrolling)
reveal concealed information
(e.g., an answer to a quiz)
(e.g., an answer to a quiz)
enlarge the Teletext display
stand by for a Teletext page while watching
a TV program
a TV program
* You can also select a Teletext page of any page number that appears in the
colored column at the bottom of the screen using the corresponding color-
coded button on the remote.
coded button on the remote.
Using FASTEXT
This feature allows you to quickly access a Teletext page that uses
FASTEXT. When a FASTEXT program is broadcast, the colored
menus appear at the bottom of the screen. The color of the menus
correspond to the red, green, yellow, and blue color-coded buttons
on the remote.
FASTEXT. When a FASTEXT program is broadcast, the colored
menus appear at the bottom of the screen. The color of the menus
correspond to the red, green, yellow, and blue color-coded buttons
on the remote.
To access a FASTEXT menu
Press the color-coded button on the remote corresponding to the
menu you want. The menu page appears on the screen after a few
seconds.
menu you want. The menu page appears on the screen after a few
seconds.
Do this
Press
.
Each time you press
, the screen changes as
follows: Teletext n Teletext and TV n TV.
Press
.
An overview of the Teletext contents, including
page numbers, appears on the screen.
page numbers, appears on the screen.
Press the number buttons to enter the three-digit
page number of the desired Teletext page.* If you
make a mistake, reenter the correct page number. To
access the next or previous page, press PROGR +/–.
page number of the desired Teletext page.* If you
make a mistake, reenter the correct page number. To
access the next or previous page, press PROGR +/–.
Press
to display the symbol “j” at the top left
corner of the screen. To resume normal Teletext
viewing, press
viewing, press
or
.
Press
.
To conceal the information, press the button again.
Press
.
Each time you press
, the Teletext display
changes as follows: Enlarge upper half n Enlarge
lower half n Normal size.
lower half n Normal size.
1 Enter the Teletext page number that you want to
refer to, then press
.
2 When the page number is displayed, press
to
show the text.
Viewing Teletext (continued)
19
Adjusting Your Setup (MENU)
Introducing the menu system
The MENU button lets you open a menu and change the settings of your TV. Here's
an overview of the menu system.
an overview of the menu system.
Level 1
Level 2
Level 3/Function
“A/V CONTROL”
“PICTURE MODE”
Select the picture mode.
“DYNAMIC” n “STANDARD” n “SOFT” n
“PERSONAL” n “ADJUST”
“DYNAMIC” n “STANDARD” n “SOFT” n
“PERSONAL” n “ADJUST”
“ADJUST”
Adjust the “PERSONAL” option. “PICTURE”n
“COLOR”n“BRIGHT”n“HUE”n“SHARP”
“COLOR”n“BRIGHT”n“HUE”n“SHARP”
“SOUND MODE”
Select the sound mode.
“DYNAMIC” n “DRAMA” n “SOFT” n
“PERSONAL” n “ADJUST”
“DYNAMIC” n “DRAMA” n “SOFT” n
“PERSONAL” n “ADJUST”
“ADJUST”
Adjust the “PERSONAL” option.
“BASS”n“TREBLE”n“BALANCE”n“BBE”*
“BASS”n“TREBLE”n“BALANCE”n“BBE”*
“SURROUND”
Select the surround mode.
“HIGH”n “LOW”n“OFF”
“HIGH”n “LOW”n“OFF”
“SET UP”
“LANGUAGE”
Change the menu language. “ENGLISH”–
“
“
” (Chinese)/
(Arabic)/
(Thai)
“CHILD LOCK”
Block the channel independently.
“PIC ROTATION”
Adjust the picture position.
“FAVORITE CH”
Program favorite channels.
“INTELLIGENT VOL”
Adjust volume automatically.
“CH PRESET”
“AUTO PROGRAM”
Preset channels automatically.
“MANUAL PROGRAM” Preset channels manually.
“SKIP”
Skip unwanted or unused program positions.
“TV SYS”
Select the TV system.
“B/G”n “I”n “D/K”n “M”
“B/G”n “I”n “D/K”n “M”
“COL SYS”
Select the color system. “AUTO”n
“PAL”n“SECAM”n“NTSC3.58”n“NTSC4.43”
“PAL”n“SECAM”n“NTSC3.58”n“NTSC4.43”
Return icon
“A/V CONTROL” icon
“SET UP” icon
“CH PRESET” icon
Name of the current
menu
menu
Menu level 3
Menu level 2
Adjusting Your Setup (MENU)
Menu level 1
* The “BBE” is manufactured by Sony Corporation under license from BBE
Sound, Inc. It is covered by U.S. Patent No. 4,638,258 and No. 4,482,866.
The word “BBE” and the BBE symbol are the trademarks of BBE Sound,
Inc.
The word “BBE” and the BBE symbol are the trademarks of BBE Sound,
Inc.
Adjusting Y
our Setup (MENU)
continued
–
38
–
KV
-XS29M31/33/50/60/63/65/93
-XS29M31/33/50/60/63/65/93
RM-954
KV
-XS29M39/69/87/89
-XS29M39/69/87/89
RM-953
20
Adjusting Your Setup (MENU)
How to use the menu
You can use the buttons on the remote
and on the TV as well to display the
menu and adjust the settings.
and on the TV as well to display the
menu and adjust the settings.
1
Press MENU to display the
menu.
menu.
2
Press + or – to select the
desired item.
desired item.
3
Press ENTER to confirm
your option and go to the
next menu level.
your option and go to the
next menu level.
Other menu operations
To
Press
Adjust the setting value
+/–
Return to the previous menu level
ENTER
Cancel the menu
MENU
+ / – /ENTER
MENU
Front of TV
Tips
• To return from Menu Level 2 to Level 1, press + / – to select the return
• To return from Menu Level 2 to Level 1, press + / – to select the return
icon (
), then press ENTER.
• You can also use the buttons on the TV for menu operations. ¸ +/– work
as + /– on the remote and … works as ENTER on the remote.
Notes
• If more than 60 seconds elapse between entries, the menu screen
• If more than 60 seconds elapse between entries, the menu screen
automatically disappears.
• With better resolution of the on-screen fonts, interlace scanning might
cause flickers on some parts of the menu screen. This does not indicate a
malfunction.
malfunction.
FAVORITE
SOUND
MODE
PIC MODE
ENTER
MENU
A/B
SURROUND
MENU
ENTER
+
+
PROGR
AUTO
PROGR
MENU
Introducing the menu system (continued)
21
Adjusting Your Setup (MENU)
Changing the “A/V
CONTROL” setting
CONTROL” setting
The “A/V CONTROL” menu allows
you to change the picture and sound
settings.
you to change the picture and sound
settings.
1
Press MENU.
2
Make sure the “A/V
CONTROL” icon (
CONTROL” icon (
) is
selected, then press
ENTER.
ENTER.
3
Press + or – to select either
“PICTURE MODE”,
“SOUND MODE”, or
“SURROUND”, then press
ENTER.
“PICTURE MODE”,
“SOUND MODE”, or
“SURROUND”, then press
ENTER.
4
Press + or – to select the
desired option, then press
ENTER.
desired option, then press
ENTER.
For
Select
“PICTURE MODE”
either “DYNAMIC”, “STANDARD”, “SOFT”, “PERSONAL”*, or “ADJUST”.
“SOUND MODE”
either “DYNAMIC”, “DRAMA”, “SOFT”, “PERSONAL”*, or “ADJUST”.
“SURROUND”
either “HIGH”, “LOW”, or “OFF”.
* When the “PERSONAL” mode is selected, the last adjusted picture
and sound settings from the “ADJUST” option are received (see
page 22).
page 22).
Tip
• For details on the options under “PICTURE MODE”, “SOUND MODE”
• For details on the options under “PICTURE MODE”, “SOUND MODE”
and “SURROUND”, see page 14 and 16 respectively.
To return to the normal screen
Press MENU.
+ / – /ENTER
MENU
FAVORITE
SOUND
MODE
PIC MODE
ENTER
MENU
A/B
SURROUND
ENTER
ENTER
ENTER
continued
–
39
–
KV
-XS29M31/33/50/60/63/65/93
-XS29M31/33/50/60/63/65/93
RM-954
KV
-XS29M39/69/87/89
-XS29M39/69/87/89
RM-953
22
Adjusting Your Setup (MENU)
Adjusting the “ADJUST” options under “PICTURE MODE”
1
Press + or – to select the
desired item (e.g., “COLOR”),
then press ENTER.
desired item (e.g., “COLOR”),
then press ENTER.
2
Adjust the value according to the following table, then press ENTER.
For
Press – to
Press + to
“PICTURE”
decrease picture contrast
increase picture contrast
“COLOR”
decrease color intensity
increase color intensity
“BRIGHT”
darken the picture
brighten the picture
“HUE”*
increase red picture tones
increase green picture tones
“SHARP”
soften the picture
sharpen the picture
* You can adjust “HUE” for the NTSC color system only.
3
Repeat the above steps to adjust other items.
The adjusted settings will be received when you select “PERSONAL”.
Adjusting the “ADJUST” options under “SOUND MODE”
1
Press + or – to select the
desired item
(e.g., “BALANCE”),
then press ENTER.
desired item
(e.g., “BALANCE”),
then press ENTER.
2
Adjust the value according to the following table, then press ENTER.
For
Press – to
Press + to
“BASS”
decrease the bass
increase the bass
“TREBLE”
decrease the treble
increase the treble
“BALANCE”
increase the left speaker’s volume
increase the right speaker’s volume
“BBE”
select “HIGH” for higher enhancement of sound clarity;
select “LOW” for lower enhancement of sound clarity;
select “OFF” to turn off the BBE sound
select “LOW” for lower enhancement of sound clarity;
select “OFF” to turn off the BBE sound
3
Repeat the above steps to adjust other items.
The adjusted settings will be received when you select “PERSONAL”.
Tip
• For details on the menu system and how to use the menu, refer to “Introducing
• For details on the menu system and how to use the menu, refer to “Introducing
the menu system” on page 19.
ENTER
COLOR
80
BALANCE
00
ENTER
Changing the “A/V CONTROL” setting (continued)
23
Adjusting Your Setup (MENU)
Changing the
“SET UP” setting
“SET UP” setting
The “SET UP” menu allows you to
change the menu language, block
channels, adjust the picture position,
program your favorite channels and
adjust volume automatically.
change the menu language, block
channels, adjust the picture position,
program your favorite channels and
adjust volume automatically.
MENU
Number
buttons
buttons
+ / – / ENTER
1
4
7
-/--
2
5
8
0
3
6
9
FAVORITE
SOUND
MODE
PIC MODE
ENTER
MENU
A/B
SURROUND
1
Press MENU.
2
Press + or – to select the
“SET UP” icon (
“SET UP” icon (
), then
press ENTER.
3
Press + or – to select the
desired option (e.g.,
“INTELLIGENT VOL”),
then press ENTER.
desired option (e.g.,
“INTELLIGENT VOL”),
then press ENTER.
Select
To
“LANGUAGE“
Change the menu language (see “Changing the menu
language” on page 12).
language” on page 12).
“CHILD LOCK“
Prevent children from watching certain channels (see
“Blocking the channels (“CHILD LOCK“)” on page 25).
“Blocking the channels (“CHILD LOCK“)” on page 25).
“PIC ROTATION“
Adjust the picture position when it is not aligned to the
TV screen.
Press + or – to adjust the picture position, then press ENTER.
TV screen.
Press + or – to adjust the picture position, then press ENTER.
“FAVORITE CH“
Program channels for direct selection (see “Programming
your favorite channels” on page 24).
your favorite channels” on page 24).
“INTELLIGENT VOL“
Adjust the volume of each TV program automatically.
Press + or – to select “ON”, then press ENTER.
To turn off the “Intelligent Volume” function, select
“OFF”, then press ENTER.
Press + or – to select “ON”, then press ENTER.
To turn off the “Intelligent Volume” function, select
“OFF”, then press ENTER.
To return to the normal screen.
Press MENU.
ENTER
ENTER
+
+
PIC ROTATION
ENTER
continued
–
40
–
KV
-XS29M31/33/50/60/63/65/93
-XS29M31/33/50/60/63/65/93
RM-954
KV
-XS29M39/69/87/89
-XS29M39/69/87/89
RM-953
24
Adjusting Your Setup (MENU)
Changing the “SET UP” setting (continued)
1
Press MENU.
2
Press + or – to select the
“SET UP” icon (
“SET UP” icon (
), then
press ENTER.
3
Press + or – to select
“FAVORITE CH“, then
press ENTER twice.
“FAVORITE CH“, then
press ENTER twice.
4
Press + or –, or number
buttons to program the
desired channel (e.g.,
“PR03”), then press
ENTER.
buttons to program the
desired channel (e.g.,
“PR03”), then press
ENTER.
5
To continue programming other favorite channels, press + or – and then
press ENTER. After that, repeat step 4.
press ENTER. After that, repeat step 4.
To return to the normal screen
Press MENU.
Tip
• For details on the menu system and how to use the menu, refer to
• For details on the menu system and how to use the menu, refer to
“Introducing the menu system” on page 19.
or
ENTER
ENTER
ENTER
1
2
3
4
5
6
7
8
0
-/--
9
ENTER
+
+
+ + + + + + + +
PRO
R 0 2
: B / G
CO L S Y S : AU TO
AU TO PROGRAM
M
S
T
T
+
+
+ + + + + + + +
PRO
R 0 2
: B / G
CO L S Y S : AU TO
AU TO PROGRAM
S
T
T
3
+
Programming your favorite channels
The “FAVORITE CH” feature enables you to program up to six
channels for direct selection.
channels for direct selection.
25
Adjusting Your Setup (MENU)
1
Press MENU.
2
Press + or – to select the
“SET UP” icon (
“SET UP” icon (
), then
press ENTER.
3
Press + or – to select
“CHILD LOCK”, then press
ENTER.
“CHILD LOCK”, then press
ENTER.
4
Press + or –, or number
buttons to select the
desired channel, then
press ENTER.
buttons to select the
desired channel, then
press ENTER.
5
Press + or – to select ON, then
press ENTER.
press ENTER.
The lock symbol (
)
appears on the screen.
To unlock the channel,
select “OFF”.
select “OFF”.
6
To continue locking other channels, press ENTER and then repeat step 4 to 5.
To return to the normal screen
Press MENU.
Note
• If you preset a locked channel, that particular channel will be unlocked
• If you preset a locked channel, that particular channel will be unlocked
automatically (see page 26).
Blocking the channels (“CHILD LOCK”)
You can prevent your children from watching certain channels by
using the “CHILD LOCK” feature.
using the “CHILD LOCK” feature.
or
ENTER
ENTER
ENTER
1
2
3
4
5
6
7
8
0
-/--
9
ENTER
+
+
+
+
ENTER
Click on the first or last page to see other KV-XS29M31 service manuals if exist.