DOWNLOAD Sony KV-XR29M50 (serv.man3) Service Manual ↓ Size: 12.04 MB | Pages: 127 in PDF or view online for FREE

22

Menu Adjustment

x

The “Setup” menu allows you to change the menu language, adjust the picture
position, change the picture size, label the connected equipment and select the
color system.

Press MENU.

Press V or v to select the “Setup” icon (

),

then press 

.

Press V or v to select the desired item (e.g., “Language”), then press 

.

“Language”

change the menu language.
Press 

V or v to select either “English” or “

” (Arabic), then

press 

.

“Picture Rotation”

adjust the picture position when it is not aligned with the TV screen.
Press 

B or b to adjust the picture position, then press 

.

“Wide Mode”

choose either “On” or “Off” (see page 9).

“Video Label”

label the connected equipment.
(1)  Select “Video Input” and press 

.

Press 

V or v to select the input you want to label, then press 

.

(2) Select “Label” and press 

, then press 

V or v to select the

label options: ”Video 1/Video 2/Video 3/ DVD”, “VCR”,
“SAT”, “Game” or “Edit”*.

*   You may edit the video label by entering alphanumeric
     characters.

“Color System”

select the color system.
Press 

V or v to select either “Auto”, “PAL”, “SECAM”,

“NTSC3.58”  or “NTSC4.43”, then press 

. Normally, set this to

“Auto”.

Confirm

End

Setup

Wide Mode:

Off

Video Label

Picture Rotation

Language:

English

Color System:

Auto

Select

01GB06ADJ-MIX.p65

6/10/03, 8:00 PM

22

Black

23

Additional Information

x

Connecting to the video input terminal ( t )

1

2

R

L

Y

C

B

C

R

3

R

L

(MONO)

1

2

R

L

Y

C

B

C

R

Notes
• If you connect a VCR to 8 (antenna input), preset the signal output from the VCR to the

program number 0 on the TV (see page 21).

Connecting to the monitor output terminal ( T )

01GB07ADJ-MIX.p65

6/10/03, 8:47 PM

23

Black

24

Additional Information

1

2

R

L

Y

C

B

C

R

Y (green)

Y

C

B

 (blue)

C

B

, P

B

, C

b

 or B-Y

C

R

 (red)

C

R

, P

R

, C

r

 or R-Y

 

Notes
• If your DVD player can output interlace and progressive mode signals, select the interlace

output when connecting to 

 (component video input) on your TV. Your TV can receive

either 525i/60Hz or 625i/50Hz interlace signals.

• Some DVD player terminals may be labeled differently:

• If you select “DVD” on your TV screen, the signal from the T (monitor output) jacks will not

be output properly. This does not indicate a malfunction.

01GB07ADJ-MIX.p65

6/10/03, 8:47 PM

24

Black

25

Additional Information

x

If you find any problem while viewing your TV, you can either use the Reset
function or check the Troubleshooting guide below. If the problem persists,
contact your Sony dealer.

Press the RESET button on your remote control.
Your TV will go blank for a few seconds
then the “Initial Setup” menu will appear.

Pressing RESET will set your TV to the factory
setting, but certain problems may be solved.

23

–

21

–

–

21

• Check the antenna cable and connection

on the TV, VCR and at the wall.

• Check the antenna setup.

Contact a Sony dealer for advice.

• Display the “Channel Setup” menu and

select “Manual Program” to preset the
channel again.

• Try using a booster.

• Turn off or disconnect the booster if it is in

use.

• Display the “Channel Setup” menu and

select the appropriate “TV System”.

• The connection is loose

or the cable is
damaged.

• The antenna setup is

inappropriate.

• Channel presetting is

inappropriate or
incomplete.

• Signal transmission is

low.

• Broadcast signals are

too strong.

• The TV system setting

is inappropriate.

TV

RESET

01GB08ADV-MIX.p65

6/10/03, 7:54 PM

25

Black