DOWNLOAD Sony KV-XR25M50 (serv.man4) Service Manual ↓ Size: 5.82 MB | Pages: 94 in PDF or view online for FREE

Model
KV-XR25M50 (serv.man4)
Pages
94
Size
5.82 MB
Type
PDF
Document
Service Manual
Brand
Device
TV
File
kv-xr25m50-sm4.pdf
Date

Sony KV-XR25M50 (serv.man4) Service Manual ▷ View online

22
Additional Information
Sony KV-XR29M53 Group C15 (GB)_2-022-685-11 (1)
x
Connecting optional components
Connecting to the video input terminal ( t )
Additional Information
TV front panel
Video game
equipment
1
2
R
L
Y
C
B
C
R
3
R
L
(MONO)
Audio/Video cable
(not supplied)
Antenna cable
(not supplied)
VCR
TV rear panel
Audio/Video cable
(not supplied)
Camcorder
Notes
• If you connect a VCR to 8 (antenna input), preset the signal output from the VCR to the
program number 0 on the TV (see page 20).
x
Connecting the 3D WOOFER
KV-XR29M53 only
You can enjoy high quality sound by connecting the 3D WOOFER as follows:
Notes
• Connect only the supplied 3D WOOFER; otherwise your TV may malfunction.
• Unplug your TV from the wall outlet when connecting the 3D WOOFER.
• To prevent a malfunction caused by a short circuit of the terminals, make sure that none of the 3D
WOOFER wire strands stick out, making contact with the neighbouring 3D WOOFER terminal.
Black wire
Red wire
Step 1
Step 2
Bottom of
3D WOOFER
01GB07ADJ-VTN.p65
4/9/04, 9:35 AM
22
Black
23
Additional Information
Sony KV-XR29M53 Group C15 (GB)_2-022-685-11 (1)
DVD player
TV rear panel
Component
video cable
(not supplied)
Audio cable
 (not supplied)
1
2
R
L
Y
C
B
C
R
Connect
To (on the DVD player)
Y (green)
Y
C
B
 (blue)
C
B
, P
B
, C
b
 or B-Y
C
R
 (red)
C
R
, P
R
, C
r
 or R-Y
Connecting to the component video input terminal ( 
 
)
Notes
• If your DVD player can output interlace and progressive mode signals, select the interlace
output when connecting to 
 (component video input) on your TV. Your TV can receive
either 525i/60Hz or 625i/50Hz interlace signals.
• Some DVD player terminals may be labeled differently:
• If you select “DVD” on your TV screen, the signal from the T (monitor output) jacks will not
be output properly. This does not indicate a malfunction.
TV rear panel
Audio system
1
2
R
L
Y
C
B
C
R
VCR
Audio/Video cable
(not supplied)
Connecting to the monitor output terminal ( T )
01GB07ADJ-VTN.p65
4/9/04, 9:35 AM
23
Black
24
Additional Information
Sony KV-XR29M53 Group C15 (GB)_2-022-685-11 (1)
Snowy picture
Noisy sound
Distorted picture
Noisy sound
Good picture
Noisy sound
Possible cause
Symptom
Solutions
Page
22
20
20
• Check the antenna cable and connection
on the TV, VCR and at the wall.
• Check the antenna setup.
Contact a Sony dealer for advice.
• Display the “Channel Setup” menu and
select “Manual Program” to preset the
channel again.
• Try using a booster.
• Turn off or disconnect the booster if it is in
use.
• Display the “Channel Setup” menu and
select the appropriate “TV System”.
• The connection is loose
or the cable is
damaged.
• The antenna setup is
inappropriate.
• Channel presetting is
inappropriate or
incomplete.
• Signal transmission is
low.
• Broadcast signals are
too strong.
• The TV system setting
is inappropriate.
Troubleshooting guide
x
Troubleshooting
If you find any problem while viewing your TV, you can either use the Reset
function or check the Troubleshooting guide below. If the problem persists,
contact your Sony dealer.
Reset function
Press the RESET button on your remote control.
Your TV will go blank for a few seconds
then the “Initial Setup” menu will appear.
Pressing RESET will set your TV to the factory
setting, but certain problems may be solved.
TV
RESET
RESET
01GB08ADV-VTN.p65
4/9/04, 9:36 AM
24
Black
25
Additional Information
Sony KV-XR29M53 Group C15 (GB)_2-022-685-11 (1)
No picture
No sound
Good picture
No sound
Dotted lines or
stripes
Double images or
“ghosts”
No color
Possible cause
Symptom
Solutions
Page
• The power cord,
antenna or VCR is not
connected.
• The TV is not turned
on.
• The volume level is too
low.
• The sound is muted.
• There is local
interference from cars,
neon signs, hair dryers,
power generators, etc.
• Broadcast signals are
reflected by nearby
mountains or
buildings.
• The antenna setup is
inappropriate.
• Use of a booster is
inappropriate.
• The color level setting
is too low.
• The color system
setting is
inappropriate.
• The antenna setup is
inappropriate.
• Check the power cord, antenna and VCR
connections.
• Press 
 ?/1
 (power).
• Press ! (main power) on the TV to turn
off the TV for about five seconds, then
turn it on again.
• Press 2 + to increase the volume level.
• Press 
 to cancel the muting.
• Do not use a hair dryer or other
equipment near the TV.
• Check the antenna setup. Contact a Sony
dealer for advice.
• Use a highly directional antenna.
• Use the fine tuning (“Fine”) function.
• Check the antenna setup. Contact a Sony
dealer for advice.
• Turn off or disconnect the booster if it is in
use.
• Display the “Picture” menu and select
“Personal” of “Mode”, then adjust the
“Color” level in “Picture Adjustment”.
• Display the “Setup” menu and check the
“Color System” setting (usually set this to
“Auto”).
• Check the antenna setup. Contact a Sony
dealer for advice.
22
9
8
9
9
20
15
21
continue
01GB08ADV-VTN.p65
4/9/04, 9:36 AM
25
Black
Page of 94
Display

Click on the first or last page to see other KV-XR25M50 (serv.man4) service manuals if exist.