DOWNLOAD Sony KV-XJ29M31 Service Manual ↓ Size: 5.11 MB | Pages: 85 in PDF or view online for FREE

Model
KV-XJ29M31
Pages
85
Size
5.11 MB
Type
PDF
Document
Service Manual
Brand
Device
TV
File
kv-xj29m31.pdf
Date

Sony KV-XJ29M31 Service Manual ▷ View online

MODEL
COMMANDER   DEST.
CHASSIS NO.
CHASSIS
TRINITR ON  
®
 
COLOR TV
SERVICE MANUAL
BG3R
MODEL
COMMANDER   DEST.
CHASSIS NO.
KV-XJ29M31
RM-952
Oceania
SCC-U44E-A
KV-XJ29M50
RM-952
India
SCC-U60H-A
KV-XJ29M50
RM-952
Thailand
SCC-U49K-A
KV-XJ29M60
RM-952
Thailand
SCC-U49J-A
KV-XJ29M80
RM-952
E
SCC-U53D-A
KV-XJ29M80
RM-952
ME
SCC-U53D-A
KV-XJ29M80
RM-952
India
SCC-U60H-A
TV
1
2
3
4
6
7
8
9
0
5
JUMP
SOUND 
MODE
 
FAVORITE
PROGR
-/--
KV-XJ29M81
RM-952
ME
SCC-U53D-A
– 2 –
KV-XJ29M31/XJ29M50/XJ29M60/
XJ29M80/XJ29M81
RM-952
SPECIFICATIONS
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY SHADING AND MARK 
! ON
THE SCHEMATIC DIAGRAMS, EXPLODED VIEWS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
CAUTION
SHORT CIRCUIT THE ANODE OF THE PICTURE TUBE AND
THE ANODE CAP TO THE METAL CHASSIS, CRT SHIELD,
OR CARBON PAINTED ON THE CRT, AFTER REMOVING THE
ANODE.
Note
Power requirements
110-240 V AC, 50/60 Hz
Except KV-XJ29M31/XJ29M50/
XJ29M60(Thailand)
220-240 V AC, 50/60 Hz
KV-XJ29M31/XJ29M50/
XJ29M60(Thailand) only
Power consumption (W) Indicated on the rear of the TV
Television system
B/G, I, D/K, M
Color system
PAL, PAL 60, SECAM, NTSC3.58, NTSC4.43
Stereo/Bilingual system
NICAM Stereo/Bilingual B/G, I, D/K;
KV-XJ29M31/XJ29M60/
A2 Stereo/Bilingual B/G
XJ29M80/XJ29M81 (ME) only
Teletext Language
English, Arabic, French
KV-XJ29M31/XJ29M81 only
Channel coverage
B/G
VHF: E2 to E12
UHF: E21 to E69
CATV: S01 to S03, S1 to S41
I
UHF: B21 to B68
CATV: S01 to S03, S1 to S41
D/K
VHF: C1 to C12, R1  to R12
UHF: C13 to C57, R21 to R60
CATV: S01 to S03, S1 to S41, Z1 to Z39
M
VHF: A2 to A13
UHF: A14 to A79
CATV: A-8 to A-2, A to W+4, W+6 to W+84
˘ (Antenna)
75-ohm external terminal
Audio output (Speaker)
5W + 5W
Number of terminal
D Video
Input: 3* Output: 1
Phono jacks; 1 V
P-P
, 75 ohms
*Two input lines available
  Audio
Input: 3* Output: 1
Phono jacks; 500 mVrms
*Two input lines available
 (Component Video) Input: 1
Phono jacks;
Y : 1 Vp-p, 75 ohms,
sync negative
C
B
 : 0.7 Vp-p, 75 ohms
C
R
 : 0.7 Vp-p, 75 ohms
Audio : 500 mVrms
2 (Headphone)
Output: 1
Stereo minijack
Picture tube
29 in.
Tube size (cm)
72
Measured diagonally
Screen size (cm)
68
Measured diagonally
Dimension (w/h/d, mm)
794 x 573 x 517
Mass (kg)
49
Design and specifications are subject to change without notice.
KV-XJ29M31/XJ29M50/XJ29M60/
XJ29M80/XJ29M81
RM-952
– 3 –
TABLE OF CONTENTS
SELF DIAGNOSTIC FUNCTION .............................. 4
1. GENERAL ................................................................. 7
2. DISASSEMBLY
2-1. Rear Cover Removal ............................................... 24
2-2. Speaker Removal .................................................... 24
2-3. Chassis Assy Removal ............................................ 24
2-4. Service Position ...................................................... 24
2-5. Replacement of Parts .............................................. 24
2-5-1. Replacement of Multi Button ...................... 24
2-5-2. Replacement of Light Guide ........................ 24
2-6. J4 Board and Treminal Bracket Removal ............... 25
2-7. D3 Board Removal .................................................. 25
2-8. V1 Board Removal .................................................. 25
2-9. H5 Board Removal .................................................. 25
2-10. A and B9 Boards Removal ..................................... 25
2-11. Picture Tube Removal ............................................. 26
3. SET-UP ADJUSTMENTS
3-1. Beam Landing ......................................................... 27
3-2. Convergence ............................................................ 28
3-3. Focus Adjustment .................................................... 30
3-4. G2 (Screen) and White Balance Adjustments ........ 30
4. CIRCUIT ADJUSTMENTS
4-1. Adjustment With Commander ................................ 31
4-2. Adjustment Method ................................................ 31
4-3. Picture Quality Adjustment .................................... 37
4-4. Deflection Adjustment ............................................ 37
4-5. H-Trapezoid Adjustment ......................................... 37
4-6. A Board Adjustment After IC003 (Memory)
Replacement ............................................................ 37
4-7. Picture Distortion Adjustment ................................ 38
Section
Title
Page
Section
Title
Page
5. DIAGRAMS
5-1. Block Diagram ........................................................ 39
5-2. Circuit Boards Location .......................................... 41
5-3. Schematic Diagrams ............................................... 42
(1) B9 Board Schematic Diagram .......................... 43
(2) A Board Schematic Diagram ............................ 45
(3) C6 Board Schematic Diagram .......................... 49
(4) H5 Board Schematic Diagram .......................... 51
(5) V1 Board Schematic Diagram .......................... 53
(6) VM1 Board Schematic Diagram ....................... 55
(7) D3 Board Schematic Diagram .......................... 56
(8) J4 Board Schematic Diagram ........................... 57
5-4. Voltage List Measurements .................................... 61
5-5. Waveforms .............................................................. 64
5-6. Printed Wiring Boards and Parts Location ............. 65
5-7. Semiconductors ....................................................... 71
6. EXPLODED VIEWS
6-1. Speaker Bracket ...................................................... 73
6-2. Chassis ..................................................................... 74
6-3.  Picture Tube ........................................................... 76
7. ELECTRICAL PARTS LIST .................................... 78
KV-XJ29M31/XJ29M50/XJ29M60/
XJ29M80/XJ29M81
RM-952
– 4 –
The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY/TIMER lamp will
automatically begin to flash.
The number of times the lamp flashes translates to a probable source of the problem. A definition of the STANDBY/
TIMER lamp flash indicators is listed in the instruction manual for the user’s knowledge and reference. If an error
symptom cannot be reproduced, the remote commander can be used to review the failure occurrence data stored in
memory to reveal past problems and how often these problems occur.
1.
DIAGNOSTIC TEST  INDICATORS
When an errors occurs, the STANDBY/TIMER lamp will flash a set number of times to indicate the possible cause of
the problem. If there is more than one error, the lamp will identify the first of the problem areas.
Result for all of the following diagnostic items are displayed on screen. No error has occured if the screen displays a
“0”.
Note 1: If a + B overcurrent is detected, stoppage of the vertical deflection is detected simultaneously.
The symptom that is diagnosed first by the microcontroller is displayed on the screen.
Note 2: Refer to screen (G2) Adjustment in section 3-4 of this manual.
SELF DIAGNOSTIC FUNCTION
Diagnostic
Item
Description
• Power does not
turn on
• +B overcurrent
(OCP) or
overvoltage
(OVP)
• Vertical deflection
stopped
• Horizontal
deflection
overdrive
• White balance
failure (no
PICTURE)
• Micro reset
Detected
Symptoms
• Power does not come on.
• No power is supplied to the
TV.
• AC power supply is faulty.
• Power does not come on.
• Load on power line is
shorted.
• Has entered standby state
after horizontal raster.
• Vertical deflection pulse is
stopped.
• Power line is shorted or
power supply is stopped.
• No raster is generated.
• CRT cathode current
detection reference pulse
output is small.
• Power is shut down shortly,
after this return back to
normal.
• Detect Micro latch up.
No. of times
STANDBY/TIMER
lamp flashes
Does not light
2 times
5 times
Self-diagnostic
display/Diagnostic
result
002:000 or
002:001~255
003:001~255
004:001~255
at the same time
005:000 or
005:001~225
101:00 or
101:001~225
Probable
Cause
Location
• Power cord is not plugged
in.
• Fuse is burned out F8601
(B9)
• H.OUT Q511 is shorted.
(A board)
• IC1800 is shorted.
(C6 board)
• -13V is not supplied.
(A board)
• IC 503 faulty (A board)
• G2 is improperly adjusted.
(Note 2)
• CRT problem.
• Video OUT is faulty.
(C6 board)
• IC301 is faulty. (A board)
• No connection A board to
C6 board.
• Discharge CRT (C6 Board)
• Static discharge
• External noise
Page of 85
Display

Sony KV-XJ29M31 Service Manual ▷ Download

  • DOWNLOAD Sony KV-XJ29M31 Service Manual ↓ Size: 5.11 MB | Pages: 85 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony KV-XJ29M31 in PDF for free, which will help you to disassemble, recover, fix and repair Sony KV-XJ29M31 TV. Information contained in Sony KV-XJ29M31 Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.